Theoretical and Experimental Investigation of Porous Tilting Pad Gas Bearings with Hermetic Squeeze Film Dampers Based on Multilayer Diaphragm Structure

References

• Agrawal, G. L. (1990), “Foil Gas Bearings for Turbomachinery (No. 901236)”, SAE Technical Paper.
   Google Scholar
• Lubell, D. R., Wade, J. L., Chauhan, N. S., and Nourse, J. G. (2008, January), “Identification and Correction of Rotor Instability in an Oil-Free Gas Turbine.” In Turbo Expo: Power for Land, Sea, and Air Vol. 43154, pp 961–968. doi:10.1115/GT2008-50305
   Google Scholar
• Oiwa, N., Masuda, M., Hirayama, T., Matsuoka, T., and Yabe, H. (2012), “Deformation and Flying Height Orbit of Glass Sheets on Aerostatic Porous Bearing Guides,” Tribology International, 48(4), pp 2–7. doi:10.1016/j.triboint.2011.08.014
   Web of Science ®Google Scholar
• DellaCorte, C., and Bruckner, R. J. (2011), “Remaining Technical Challenges and Future Plans for Oil-Free Turbomachinery,” Journal of Engineering for Gas Turbines and Power, 133(4), p 042502. doi:10.1115/1.4002271.
   Web of Science ®Google Scholar
• Sneck, H. J. (1968), “A Survey of Gas-Lubricated Porous Bearings.” Journal of Tribology, 90(4), pp 804–809. doi:10.1115/1.3601724
   Google Scholar
• Majumdar, B. C. (1975), “Analysis of Externally Pressurized Porous Gas Journal Bearings-I.” Wear, 33(1), pp 25–35. doi:10.1016/0043-1648(75)90221-5
   Google Scholar
• Agrawal, G. L. (1997), “Foil Air/Gas Bearing Technology—An Overview”. Paper presented at ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition, Orlando, Florida, 78682, V001T04A006. doi:10.1115/97-GT-347
   Google Scholar
• Feng, K., Zhao, X., Huo, C., and Zhang, Z. (2016), “Analysis of Novel Hybrid Bump-Metal Mesh Foil Bearings, Tribology International, 103, pp 529–539. doi:10.1016/j.triboint.2016.08.008
   Web of Science ®Google Scholar
• De Santiago, O., and Solorzano, V. (2013, June), “Experiments with Scaled Foil Bearings in a Test Compressor Rotor.” In Turbo Expo: Power for Land, Sea, and Air, Vol. 55263, p V07AT29A002. American Society of Mechanical Engineers. doi:10.1115/GT2013-94087
   Google Scholar
• DellaCorte, C. (2010), “Stiffness and Damping Coefficient Estimation of Compliant Surface Gas Bearings for Oil-Free Turbo- machinery,” NASA report NASA/TM-2010- 216924, Cleveland, OH, December.
   Google Scholar
• Lee, Y. B., Kim, T. H., Kim, C. H., Lee, N. S., and Choi, D. H. (2004), “Dynamic Characteristics of a Flexible Rotor System Supported by a Viscoelastic Foil Bearing (VEFB)[J],” Tribology International, 37(9), pp 679–687. doi:10.1016/S0301-679X(03)00013-6
   Web of Science ®Google Scholar
• Sim, K., and Kim, D. (2007), “Design of Flexure Pivot Tilting Pads Gas Bearings for High-Speed Oil-Free Microturbomachinery. Journal of Tribology, 129, pp 112–119. doi:10.1115/1.2372763
   Web of Science ®Google Scholar
• Ryu, K., and Ashton, Z. (2016), “Bump-Type Foil Bearings and Flexure Pivot Tilting Pad Bearings for Oil-Free Automotive Turbochargers: Highlights in Rotordynamic Performance,” Journal of Engineering for Gas Turbines and Power, 138(4), p 042501. doi:10.1115/1.4031440
   Web of Science ®Google Scholar
• Heller, S., Shapiro, W., and Decker, O. (1971), “A Porous Hydrostatic Gas Bearing for Use in Miniature Turbomachinery,” ASLE Transactions, 14(2), pp 144–155. doi:10.1080/05698197108983236
   Google Scholar
• Lihua, Y., Shemiao, Q., and Lie, Y. (2008), "Analysis on Dynamic Performance of Hydrodynamic Tilting-Pad Gas Bearings Using Partial Derivative Method." ASME Journal of Tribology, 131(1), p 011703. doi:10.1115/1.2991232
   Web of Science ®Google Scholar
• San Andres, L., Cable, T. A., Zheng, Y., De Santiago, O., and Devitt, D. (2016, June), “Assessment of Porous Type Gas Bearings: Measurements of Bearing Performance and Rotor Vibrations”. In Turbo Expo: Power for Land, Sea, and Air, Vol. 49842, p. V07BT31A031. American Society of Mechanical Engineers. doi:10.1115/GT2016-57876
   Google Scholar
• Bolen, R. (2020), “Measurements of the Static and Dynamic Load Performance of a Carbon-Graphite Porous Surface Tilting-Pad Gas Lubricated Journal Bearing.” Master's thesis, Texas A&M University. Available electronically from https://hdl.handle.net/1969.1/192687
   Google Scholar
• Jin, X., Xia, P., Liu, Z., Ma, W., Zhang, P., and Liang, Y. (2022), “Thermo-Hybrid Lubrication FSI-CFD Model for the Static Characteristics of Hybrid Porous Tilting Pad Bearings,” Tribology International, 167, p 107397. doi:10.1016/j.triboint.2021.107397
   Web of Science ®Google Scholar
• Zhu, X. H., and San Andres, L. (2007), “Rotordynamic Performance of Flexure Pivot Hydrostatic Gas Bearings for Oil-Free Turbomachinery,” Journal of Engineering for Gas Turbines and Power, 129(4), pp 1020–1027. doi:10.1115/1.2720518
   Web of Science ®Google Scholar
• Wu, Y., Deng, M., Feng, K., Guan, H., and Cao, Y. (2020), “Investigations on the Nonlinear Dynamic Characteristics of a Rotor Supported by Porous Tilting Pad Bearings,” Nonlinear Dynamics, 100(3), pp 2265–2286. doi:10.1007/s11071-020-05652-0
   Web of Science ®Google Scholar
• Rimpel, A., and Kim, D. (2009), “Rotordynamic Performance of Flexure Pivot Tilting Pad Gas Bearings with Vibration Damper,” Journal of Tribology, 131, p 021101. doi:10.1115/1.3063809
   Web of Science ®Google Scholar
• San Andres, L., Yang, J., and McGowan, R. (2021), “Measurements of Static and Dynamic Load Performance of a 102 mm Carbon-Graphite Porous Surface Tilting-Pad Gas Journal Bearing.” Journal of Engineering for Gas Turbines and Power, 143(11), p 111017. doi:10.1115/1.4051965
   Web of Science ®Google Scholar
• Wu, Y., An, L., Feng, K., Cao, Y., and Guan, H. (2022), “Experimental and Theoretical Investigation on Rotodynamic Characterization of Hybrid Porous Tilting Pad Bearings,” Mechanical Systems and Signal Processing, 164, p 108245. doi:10.1016/j.ymssp.2021.108245
   Web of Science ®Google Scholar
• Ertas, B. H. (2009), “Compliant Hybrid Journal Bearings Using Integral Wire Mesh Dampers,” ASME Journal of Engineering for Gas Turbines and Power Power, 131(2), p. 022503.
   Web of Science ®Google Scholar
• Feng K., Wu, Y., Liu, W., Zhao, X., and Li, W. (2018), Theoretical investigation on porous tilting pad bearings considering tilting pad motion and porous material restriction. Precision Engineering, S0141635917305238. doi:10.1016/j.precisioneng.2018.02.010
   Web of Science ®Google Scholar
• Ertas, B. H, and Delgado, A. (2018), “Hermetically Sealed Squeeze Film Damper for Operation in Oil-Free Environments," ASME Journal of Engineering for Gas Turbines and Power Power, 141(2), p. 022503.
   Web of Science ®Google Scholar
• Vance, J. M., and Royal, A. C. (1975). High-speed rotor dynamics-An assessment of current technology for small turboshaft engines. Journal of Aircraft, 12(4), 295–305. doi:10.2514/3.44447
   Google Scholar
• Memmott, E. A. (1992), “Stability of Centrifugal Compressors by Applications of Tilt Pad Seals, Damper Bearings, and Shunt Holes,” IMechE Fifth International Conference on Vibrations in Rotating Machinery, Bath, UK, Sept. 7-10, p. 99–106.
   Google Scholar
• Della Pietra, L., and Adiletta, G. (2002), The squeeze film damper over four decades of investigations. Part I: Characteristics and operating features. The Shock and Vibration Digest, 34(1), 3–26.
   Google Scholar
• Kandasamy, J., Jaiswal, B. L., Sarasu, P., Sivaperumal, S., Babu, D., and Kumar, A. (2014, December), Experimental investigation of squeeze film damper characteristics at high speed rotor configurations. In Gas Turbine India Conference (Vol. 49644, p. V001T07A003). American Society of Mechanical Engineers. doi:10.1115/GTINDIA2014-8186
   Google Scholar
• Adiletta, G., and Della Pietra, L. (2002), The squeeze film damper over four decades of investigations. Part II: Rotordynamic analyses with rigid and flexible rotors. The Shock and vibration digest, 34(2), 97–126.
   Google Scholar
• Diaz, S., and San Andres, L. (2001), A model for squeeze film dampers operating with air entrainment and validation with experiments. J. Trib., 123(1), 125–133. doi:10.1115/1.1330742
   Web of Science ®Google Scholar
• Ertas, B. (2019), Compliant hybrid gas bearing using integral hermetically sealed squeeze film dampers. Journal of Engineering for Gas Turbines and Power, 141(10). doi:10.1115/1.4044644
   PubMed Web of Science ®Google Scholar
• Diaz, S., and San Andres, L. (September 19, 2000), "A Model for Squeeze Film Dampers Operating With Air Entrainment and Validation With Experiments ." ASME. J. Tribol. January 2001; 123(1): 125–133. doi:10.1115/1.1330742
   Web of Science ®Google Scholar
• Otsu, Y., Miyatake, M., and Yoshimoto, S. (2011), Dynamic characteristics of aerostatic porous journal bearings with a surface-restricted layer. J Tribol 133(1):10.
   Web of Science ®Google Scholar
• Makris, N. (1992), Theoretical and experimental investigation of viscous dampers in applications of seismic and vibration isolation. (Doctoral dissertation, State University of New York at Buffalo.).
   Google Scholar
• Xu, Z. D., Wang, D. X., and Shi, C. F. (2011), Model, tests and application design for viscoelastic dampers. Journal of Vibration and Control, 17(9),1359–1370. doi:10.1177/1077546310373617
   Web of Science ®Google Scholar
• Ertas, B. H, and Gary, K. (2021, June), Frequency Dependancy of Dynamic Force Coefficients for Hermetic Squeeze Film Dampers Utilizing Fluid-Bounding Flexible Structures. In Turbo Expo: Power for Land, Sea, and Air (Vol. 85024, p. V09AT24A020). American Society of Mechanical Engineers.
   Google Scholar