An Investigation Into the Influence of Viscosity on Gear Churning Losses by Considering the Effective Immersion Depth

References

• Kolekar, A. S., Olver, A. V., Sworski, A. E., and Lockwood, F. E. (2014), “Windage and Churning Effects in Dipped Lubrication,” J. Tribol., 136(2), pp 1–10. doi:10.1115/1.4025992.
   Web of Science ®Google Scholar
• Stavytskyi, V., Bashta, B., Nosko, P., and Tsybrii, Y. (2022), “Determination of Hydrodynamic Power Losses in a Gearing,” Acta Mech. Autom., 16(1). doi:10.2478/ama-2022-0001.
   Web of Science ®Google Scholar
• Changenet, C., and Velex, P. (2008), “Housing Influence on Churning Losses in Geared Transmissions,” J. Mech. Des. Trans. ASME, 130(6), pp 0626031–0626036. doi:10.1115/1.2900714.
   Web of Science ®Google Scholar
• Leprince, G., Changenet, C., Ville, F., and Velex, P. (2012), “Investigations on Oil Flow Rates Projected on the Casing Walls by Splashed Lubricated Gears,” Adv. Tribol., 2012. doi:10.1155/2012/365414.
   Google Scholar
• Höhn, B. R., Michaelis, K., and Otto, H. P. (2008), “Influence of Immersion Depth of Dip Lubricated Gears on Power Loss, Bulk Temperature and Scuffing Load Carrying Capacity,” Int. J. Mech. Mater. Des., 4(2), pp 145–156. doi:10.1007/s10999-007-9045-z.
   Google Scholar
• Liu, H., et al. (2019), “Numerical Modelling of Oil Distribution and Churning Gear Power Losses of Gearboxes by Smoothed Particle Hydrodynamics,” Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., 233(1), pp 74–86. doi:10.1177/1350650118760626.
   Web of Science ®Google Scholar
• Leprince, G., Changenet, C., Ville, F., Velex, P., Dufau, C., and Jarnias, F. (2011), “Influence of Aerated Lubricants on Gear Churning Losses—An Engineering Model,” Tribol. Trans., 54(6), pp 929–938. doi:10.1080/10402004.2011.597542.
   Web of Science ®Google Scholar
• Chen, S. W., and Matsumoto, S. (2016), “Influence of Relative Position of Gears and Casing Wall Shape of Gear Box on Churning Loss under Splash Lubrication Condition—Some New Ideas,” Tribol. Trans., 59(6), pp 993–1004. doi:10.1080/10402004.2015.1129568.
   Web of Science ®Google Scholar
• Changenet, C., and Velex, P. (2007), “A Model for the Prediction of Churning Losses in Geared Transmissions—Preliminary Results,” J. Mech. Des. Trans. ASME, 129(1), pp 128–133. doi:10.1115/1.2403727.
   Web of Science ®Google Scholar
• Changenet, C., Leprince, G., Ville, F., and Velex, P. (2011), “A Note on Flow Regimes and Churning Loss Modeling,” J. Mech. Des. Trans. ASME, 133(12), pp 1–5. doi:10.1115/1.4005330.
   Web of Science ®Google Scholar
• Boness, R. J. (1989), “Churning Losses of Discs and Gears Running Partially Submerged in Oil.” In Proceedings of the ASME International Power Transmission and Gearing Conference, Chicago, 1989, pp 355–359.
   Google Scholar
• Terekhov, A. S. (1975), “Hydraulic Losses in Gearboxes with Oil Immersion,” Russ. Eng. J. (English Transl. Vestn. Mashinostroeniya), 55(5), pp 7–11.
   Google Scholar
• Lauster, E., and Boos, M. (1983), “Zum Wärmehaushal Mechanischer Schaltgetriebe für Nutzfahrzeuge,” VDI-Ber., 488, pp 45–55.
   Google Scholar
• Changenet, C., Oviedo-Marlot, X., and Velex, P. (2006), “Power Loss Predictions in Geared Transmissions Using Thermal Networks-Applications to a Six-Speed Manual Gearbox,” Trans. ASME Downloaded, 128(May), pp 618–625. doi:10.1115/1.2181601.
   Google Scholar
• Luke, P., and Olver, A. V. (1999), “A Study of Churning Losses in Dip-Lubricated Spur Gears,” Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng., 213(5), pp 337–345. doi:10.1243/0954410991533061.
   Web of Science ®Google Scholar
• Terekhov, A. S. (1991), “Basic Problems of Heat Calculation of Gear Reducers.” In Proceedings of Japanese Society of Mechanical Engineers International Conference on Motion and Power Transmissions, 1991, pp 490–495.
   Google Scholar
• Quiban, R., Changenet, C., Marchesse, Y., Ville, F., and Belmonte, J. (2020), “Churning Losses of Spiral Bevel Gears at High Rotational Speed,” Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., 234(2). doi:10.1177/1350650119858236.
   Web of Science ®Google Scholar
• Laruelle, S., Fossier, C., Changenet, C., Ville, F., and Koechlin, S. (2017), “Experimental Investigations and Analysis on Churning Losses of Splash Lubricated Spiral Bevel Gears,” Mech. Ind., 18(4). doi:10.1051/meca/2017007.
   Web of Science ®Google Scholar
• Boni, J. B., Neurouth, A., Changenet, C., and Ville, F. (2017), “Experimental Investigations on Churning Power Losses Generated in a Planetary Gear Set,” J. Adv. Mech. Des. Syst. Manuf., 11(6), pp 1–12. doi:10.1299/jamdsm.2017jamdsm0079.
   Web of Science ®Google Scholar
• Boni, J. B., Changenet, C., Ville, F. (2021), “Analysis of Flow Regimes and Associated Sources of Dissipation in Splash Lubricated Planetary Gear Sets,” J. Tribol., 143(11). doi:10.1115/1.4051389.
   Web of Science ®Google Scholar