Wear of Ceramic Cutting Tools in Ni-Based Superalloy Machining

REFERENCES

• Vigneau , J. , Boulanger , J. J. and LeMaitre , F. , “ Behavior of Ceramic Tools During the Machining of Nickel-Base Alloys ,” Annals of the CIRP , 31 , 1 , pp 35 – 39 ( 1982 ).
   Google Scholar
• Huet , J. F. and Kramer , B. M. , “ The Wear of Ceramic Tools ,” Proc. 10th North American Manufacturing Research Conf. , McMaster University, Hamilton. Ontario, P 297 ( 1982 ).
   Google Scholar
• Wright , P. K. , Horne , J. G. and Tabor , D. , “ Boundary Conditions at the Chip-Tool Interface in Machining: Comparisons Beteween Seizure and Sliding friction. ” Wear , 54 , pp 371 – 390 (11)79)
   Web of Science ®Google Scholar
• Nakajima , K. , Ohgo , K. and Awano , T. , “ Formation of a Built-up Edge During Machining ,” Wear , 11 ( 1 ), pp 369 – 379 ( 1968 ).
   Google Scholar
• Ohgo , K. , “ The Adhesion Mechanism of the Built-up Edge and the Layer on the Rake Face of a Culling Tool ,” Wear , 51 , pp 117 – 126 ( 1978 ).
   Web of Science ®Google Scholar
• Kramer , B. M. and Suh , N. P. , “ Tool Wear by Solution: A Quantitative Understanding ,” Jour. of Eng. for Ind. , 102 , pp 303 – 309 ( 1980 ).
   Web of Science ®Google Scholar
• Kramer , B. M. , “ On Tool Materials for High Speed Machining ,” ASME Trans. Jour, of Eng. for Ind. , 109 ( 1986 ).
   Google Scholar
• Kramer , B. M. and Hartung , P. D. , “ Theoretical Considerations in the Machining of Nickel-Based Alloys ,” Cutting Tool Materials. Am. Soc. for Metals , Metals Park , OH , pp 57 – 74 ( 1981 ).
   Google Scholar
• Buljan , S.-T. and Wayne , S. F. , “ Silicon Nitride-Based Composite Cutting Tools: Material Design Approach ,” Adv. Cer. Mater. , 2 , 4 , ( 1987 ).
   Web of Science ®Google Scholar
• Wayne , S. F. and Buljan , S.-T. , “ The Role of Thermal Shock on Tool Life of Selected Ceramic Canting Tool Materials ,” Jour. Am. Ceram. Soc. , 72 , 5 , pp 754 – 760 ( 1989 ).
   Web of Science ®Google Scholar
• Buljan , S.-T. , Baldoni , J. G. and Huckabee , M. L. , “ Si3N4-SiC Composites ,” Ceramic Bulletin , 66 , 2 ( 1987 ).
   Web of Science ®Google Scholar
• Baldoni , J. G. , Buljan , S.-T. and Sarin , V. K. , “ Particulate TiC Ceramic Matrix Composites ,” Proc. Inst. Phys. Cont. Ser: No. 75 , Adam Hilger Ltd. , Bristol . England ( 1986 ).
   Google Scholar
• Shaw , M. C. , Metal Cutting Principles , The MIT Press , Cambridge , MA ( 1968 ).
   Google Scholar
• Trent , E. M. , Metal Cutting. Butterworths , London , England ( 1978 ).
   Google Scholar
• Bhattacharyya , S. K. , Jawaid , A. and Wallbank , J. , “ Wear of SiAION Tooling in the High Speed Machining of Aerospace Materials ,” Mater. Technol. 10 , pp 482 – 489 ( 1983 ).
   Google Scholar
• Wayne , S. F. and Buljan , S.-T. , “ Friction and Wear of Si3N4 Ceramic/Metal Couples in Dynamic Contact ,” Soc. of Automotive Eng. Tech., Paper No. 880676 , pp 1 – 8 ( 1988 ).
   Google Scholar
• Usui , E. , Shirakashi , T. and Kitagawa , T. , “ Analytical Prediction of Cutting Tool Wear. ” Wear , 100 , pp 129 – 151 ( 1984 ).
   Web of Science ®Google Scholar
• Aucote , J. and Foster , S. R. , “ Performance of SiAION Cutting Tools When Machining Nickel-Base Aerospace Alloys. ” Materials and Sci. Tech. , 2 , pp 700 – 708 ( 1986 ).
   Web of Science ®Google Scholar
• Vigneau , J. , Bordel , P. and Leonard , A. , “ Influence of the Microstructure of the Composite Ceramic Tools on Their Performance When Machining Nickel Alloys ,” Annals of the CIRP. 36 , ( 1 ). pp 13 – 16 ( 1987 ).
   Google Scholar
• Lee , M. , Horne , J. G. and Tabor , D. , “ The Mechanism of Notch Formation at die Depth of Cut Line of Ceramic Tools Machining Nickel Base Superalloys. ” Proc. Int. Conf. on Wear of Mater. ASME, pp 460 – 469 ( 1979 ).
   Google Scholar
• Komanduri , R. and Schroeder , T. A. , “ On Shear Instability in Machining a Nickel-Iron Base Superalloy ,” Proc. ASME Conf, High Speed Machining. New Orleans , LA , pp 287 – 306 ( 1984 ).
   Google Scholar
• Jack , D. H. , “ Ceramic Cutting Tool Materials ,” Materials and Design , 7 , 5 ( 1986 ).
   Google Scholar
• Baldoni , J. C. , Wayne , S. F. and Buljan , S.-T. , “ Cutting Tool Materials: Mechanical Properties- Wear-Resistance Relationships ,” ASLE Trans. , 29 , 3 , pp 347 – 352 ( 1986 ).
   Google Scholar
• Hasselman , D. P. H. , “ Figures-of-Merit for the Thermal Stress Resistance of high-Temperature Brittle Materials: A Review ,” Ceramurgia International. 4 , 4 , pp 147 – 150 ( 1978 ).
   Google Scholar