A Data-Fitted Rolling Bearing Life Prediction Model–-Part II: Model Fit to the Historical Experimental Database

DATABASE SOURCES

• AVRADCOM: , Morrison , F. R. , McCool , J. I. and Ninos , N. J. 1979 . “M50 Steel Bearing Material Factors for rolling Element Life Calculations. Phase II,” . In AVRADCOM Technical Report TR 79-48
   Google Scholar
• SKF/LIU: , Liu , J. Y. , Tallian , T. E. and McCool , J. I. 1974 . “Dependence of Bearing Fatigue Life on Film Thickness to Surface Roughness Ratio,” . ASLE Trans. , 18 ( 2 ) : 144 – 152 .
   Google Scholar
• SKF/CHOMAN: , Choman , L. J. , Long , M. C. , Balsley , D. and Mann , W. 1968 . “Endurance Test of 7309 Bearings Made from Twice Consumably Vacuum Melted 52CB Steel,” . In SKF Industries Inc. (2) Choman, L. J., Long, M. C., Balsley, D. and Mann, W., "Endurance Test of A Baseline Group of 7309 Inner Rings Made from Consumably Vacuum Melted Conventionally Heat Treated 52100 Steel," SKF Industries Inc., (1968). (3) Choman, L. J. and Long, M. C., "Endurance Test of 7309 Bearings with Rings Made from Twice Vacuum Remelted 52CB Steel with Controlled Fiber Orientation, SKF Industries Inc., (1969). (4) and (5) Choman, L. J., Brody, M. and Long, M. C., "The Evaluation of Thrust Loaded 7309 Size Bearings Made of Consumable Electrode Twice Vacuum Remelted CVD 52CB Steel with and without Controlled Fiber Orientation," SKF Industries, Inc., (1969). (6) and (7) Virden, E. H., Balsley, D. and Long, M., "The Evaluation after Test of Endurance Tested CVM 52CB Steel Ball Bearings in Mil-L-23699 Oils," SKF Industries Inc., (1969). (8) and (9) Choman, L. J., Long, M. C. and McCool, J. L., "Endurance Test of 7309 Inner Rings Made from Consumably Vacuum Melted 52100 Steel Heat Treated by Bainitic double Quench Methods," SKF Industries Inc., (1969).
   Google Scholar
• SKF/AMERONGEN: , Tallian , T. E. , Chiu , Y. P. and xsvan Amerongen , E. 1978 . “Prediction of Traction and Microgeometry Effects on Rolling Contact Fatigue Life,” . ASME Jour. Lubr. Tech. , 100 ( 2 ) : 156 – 166 .
   Google Scholar
• LOROESCH: and Lorösch , H.-K. 1982 . “Influence of Load on the Magnitude of the Life Exponent for rolling Bearings,” . In ASTM Spec. Publ. , 771 Philadelphia, PA : ASTM .
   Google Scholar
• DANNER: and Danner , C. H. 1969 . “Fatigue Life of Tapered Roller Bearings under Minimal Lubricant Films,” . ASLE Trans. , 132 : 241 – 251 .
   Google Scholar
• HARRIS: , Harris , T. A. , Skiller , J. and Spitzer , R. F. 1992 . “On the Fatigue Life of M50 NiL rolling Bearings,” . Trib. Trans. , 35 ( 4 ) : 731 – 737 .
   Web of Science ®Google Scholar
• SKF/MORRISON: , Morrison , T. W. , Tallian , T. , Walp , H. O. and Baile , G. H. 1962 . “The Effect of Material Variables on the Fatigue Life of AISI 52100 Steel Ball Bearings,” . ASLE Trans. , 5 ( 2 ) : 347 – 364 .
   Google Scholar
• SKF/CONTAM: and Tallian , T. E. 1976 . “Prediction of Rolling Contact Fatigue Life in Contaminated Lubricant: Part II—Experimental,” . ASME Jour. Lubr. Tech. , 98 ( 3 ) : 384 – 392 .
   Google Scholar
• ANDREASON-LUNG: , Andréason , S. and Lund , T. 1972 . “Ball-Bearing Endurance Testing Considering Elastohydrodynamic Lubrication,” . 138 – 141 . I. Mech. E., C36/72
   Google Scholar
• SKURKA: and Skurka , J. C. 1970 . “Elastohydrodynamic Lubrication of Roller Bearings,” . ASME Jour. Lubr. Tech. , 70 : 281 – 291 .
   Google Scholar
• LOEWENTHAL 1: , Loewenthal , S. H. and Moyer , D. W. 1979 . “Filtration Effects on Ball Bearing Life and Condition in a Contaminated Lubricant,” . ASME Jour. Lubr. Tech. , 101 : 171 – 179 .
   Google Scholar
• LOEWENTHAL 2: , Loewenthal , S. H. , Moyer , D. W. and Needelman , W. M. 1982 . “Effect of Ultra-Clean and Centrifugal Filtration on Rolling Element Bearing Life,” . ASME Jour. Lubr. Tech. , 104 : 283 – 292 .
   Google Scholar
• PEARSON: , Bamberger , E. N. , Averbach , B. L. and Pearson , P. K. 1985 . “Improved Fracture Toughness Bearings, Aero Propulsion Laboratory Technical Report ” . OH : WPAFB . AFWAL-TR-84-2103
   Google Scholar
• PARKER: , Parker , R. J. , Signer , H. R. and Pinel , S. I. 1982 . “Endurance Tests with Large-bore Tapered-roller Bearings to 2.2 Million DN,” . ASME Jour. Lubr. Tech. , 104 : 293 – 299 .
   Google Scholar
• BAM/ZAR/SIG: , Bamberger , E. N. , Zaretsky , E. V. and Signer , H. 1976 . “Endurance and Failure Characteristic of Main-shaft Jet Engine Rearing at 3 × 106 DN,” . ASME Jour. Lubr. Tech. , 98 : 580 – 585 .
   Google Scholar
• MOYER/BIANCHI: , Moyer , C. A. and Bianchi , A. 1972 . “Relating Lubricant Parameters and Bearing Fatigue Life in the Mixed E. H. L. Regime,” . 95 – 96 . I. Mech. E., C15/72
   Google Scholar
• ZAR/PAR/AND: , Zaretsky , E. V. , Parker , R. J. and Anderson , W. J. 1967 . “Component Hardness Differences and Their Effect on Bearing Fatigue,” . ASME Jour. Lubr. Tech. , 89 : 47 – 62 .
   Google Scholar
• PAR/ZAR/BAM: , Parker , R. J. , Zaretsky , E. V. and Bamberger , E. N. 1974 . “Evaluation of Load-Life Relation with Ball Bearings at 500 Deg. F,” . ASME Jour. Lubr. Tech. , 96 : 391 – 397 .
   Google Scholar
• PWA:Pratt & Whitney Aircraft Div. of United Technologies, “Life Data for Large Gas Turbine Mainshaft Thrust Ball Bearing,” Undated private communication.
   Google Scholar
• ZAR/AND/BAM: , Zaretsky , E. V. , Anderson , W. J. and Bamberger , E. N. 1968 . “Rolling Element Bearing Life from 400° to 600°F,” . NASA TN D-5002
   Google Scholar
• PAR/ZAR: , Parker , R. J. and Zaretsky , E. V. 1972 . “Effect of Residual Stress Induced by Prestressing on Rolling Element Fatigue Life,” . NASA TN D-6995
   Google Scholar
• TAKATA: , Takata , H. , Maeda , E. and Hirano , F. 1988 . “Effect of Molecular Weight Distribution of Mineral Oils on Fatigue Life of Radial Ball-bearings,” . Wear , 123 : 293 – 302 .
   Web of Science ®Google Scholar
• PWA2: , Mohn , J. H. , Hodgens , H. M.II , Munson , H. E. and Poole , W. E. 1986 . “Improvement of the Corrosion Resistance of Turbine Engine Bearings,” . In AF Wright Aeronautical Laboratories Report , OH : WPAFB . AFWAL-TR-85-2097
   Google Scholar
• ORVOS: , Orvos , P. S. and Dressler , G. J. 1979 . “Tapered Roller Bearing Development for Aircraft Turbine Engines,” . In AF Aero Propulsion Laboratory Report AAPL-TR-79-2007
   Google Scholar