REFERENCES
- Jones , A. B. , “ A General Theory for Elastically Constrained Ball and Radial Roller Bearings under Arbitrary Load and Speed Conditions ,” ASME Jour. of Basic Eng. , 82 , 2 , pp 309 – 320 ( 1960 ).
- Palmgren , A. , Ball and Roller Bearing Engineering , S. H. Burbank , Philadelphia , PA , pp 40 – 51 ( 1959 ).
- Harris , T. A. , Rolling Bearing Analysis , John Wiley and Sons , New York , pp 56 – 61 and 165, ( 1991 ).
- Jones , A. B. and Harris , T. A. , “ Analysis of a Rolling-Element Idler Gear Bearing Having a Deformable Outer-Race Structure ,” ASME Jour. of Basic Eng. , 85 , 2 , pp 273 – 278 ( 1963 ).
- de Mul , J. M. , Vree , J. M. and Maas , D. A. , “ Equilibrium and Associated Load Distribution in Ball and Roller Bearings Loaded in Five Degrees of Freedom While Neglecting Friction—Part I: General Theory and Application to Ball Bearings ,” ASME Jour. of Trib. , 111 , pp 142 – 148 ( 1989 ).
- de Mul , J. M. , Vree , J. M. and Maas , D. A. , “ Equilibrium and Associated Load Distribution in Ball and Roller Bearings Loaded in Five Degrees of Freedom While Neglecting Friction—Part II: Application to Roller Bearings and Experimental Verification ,” ASME Jour. of Trib. , 111 , pp 149 – 154 ( 1989 ).
- Masters , S. , Hiraki , S. , Yukawa , K. and Matsubara , M. , “ A Finite Element Method Analysis of Heavy Duty Axle Bearing Loads ,” SAE Trans. , 100 , 2 , pp 257 – 266 ( 1991 ).
- Mak , A. W. C. and Miller , R. E. , “ Roller Bearing Analysis Using Curved Finite Elements ,” in Computers in Engineering , ASME , New York , pp 203 – 207 ( 1988 ).
- McHorney , P. , Banholzer , T. , Itkin , N. , Gassel , S. and Goldberg , S. , “ Integrated Non-linear Finite Element Analysis of Ball Bearing Structural Systems ,” in Computers in Engineering , ASME , New York , pp 73 – 78 ( 1988 ).
- Pallini , R. A. , “ Predicting the Effects of Structural Distortions on the Performance of Large-Diameter Rolling Bearings ,” Lubr. Eng. , 40 , 5 , pp 267 – 276 ( 1984 ).
- Pallini , R. A. and Rumbarger , J. H. , “ Failure Analysis and Redesign of Large-Diameter Stacker/Reclaimer Slew Bearings ,” Lubr. Eng. , 35 , 12 , pp 692 – 697 ( 1979 ).
- Rouch , K. E. and Schmucker , W. A. , “ Bearing-Structure Considerations in Design of Ladle Turrets for Continuous Casters ,” Lubr. Eng. , 38 , 11 , pp 681 – 688 ( 1982 ).
- Marciniec , A. and Torstenfelt , B. , “ Load Distribution in Flexibly Supported Three-Row Roller Slew Bearings ,” Trib. Trans. , 37 , 4 , pp 757 – 762 ( 1994 ).
- Ugural , A. C. and Fenster , S. K. , Advanced Strength and Applied Elasticity , Elsevier , Limerick , Ireland , p 180 , ( 1975 ).
- Johnson , K. L. , Contact Mechanics , Cambridge University Press , London , pp 84 – 152 ( 1985 ).