153
Views
26
CrossRef citations to date
0
Altmetric
Original Articles

Residual Stresses Due to Debris Effects in EHL Contacts

, &
Pages 613-620 | Published online: 25 Mar 2008

REFERENCES

  • Sayles , R. S. , Hamer , J. C. and Ioannides , E. , “ The Effects of Particulate Contamination in Rolling Bearings—A State of Art Review ,” in Proc. of the IMechE , 204 , pp 29 – 36 ( 1990 ).
  • Xu , G. , Nickel , D. A. , Sadeghi , F. and Ai , X. , “ Elasto-Plasto Hydrodynamic Lubrication With Dent Effects ,” Jour. of Eng. Trib. , 210 , pp 233 – 245 ( 1996 ).
  • Webster , M. N. , Ioannides , E. and Sayles , R. S. , “ The Effect of Topographical Defects on the Contact Stress and Fatigue Life in Rolling Element Bearing ,” in Proc. of the 12th Leeds-Lyon Symp. on Trib. , Lyon, 12 , pp 121 – 131 ( 1985 ).
  • Sayles , R. S. and Ioannides , E. , “ Debris Damage in Rolling Bearings and Its Effect on Fatigue Life ,” ASME Jour. of Trib. , 110 , pp 26 – 31 ( 1988 ).
  • Johnson , K. L. , “ The Strength of Surfaces in Rolling Contact ,” Jour. of Mech. Eng. Sci. , 203 , pp 151 – 163 ( 1989 ).
  • Xu , G. , “ Debris Denting, Spall Initiation and Propagation in EHL Contacts ,” Ph.D. Dissertation, Purdue University , West Lafayette , IN , ( 1997 ).
  • Jiang , Y. and Sehitoglu , H. , “ An Analytical Approach to Elastic-Plastic Stress Analysis of Rolling Contact ,” ASME Jour. of Trib. , 116 , pp 577 – 587 ( 1994 ).
  • Yu , M. , Moran , B. and Keer , L. M. , “ A Direct Analysis of Two-Dimensional Elastic-Plastic Rolling Contact ,” ASME Jour. of Trib. , 115 , pp 227 – 236 ( 1993 ).
  • Kulkarni , S. M. , Hahn , G. T. , Rubin , C. A. and Bhargava , V. , “ Elasto-Plastic Finite Element Analysis of Three-Dimensional Pure Rolling Contact at the Shakedown Limit ,” ASME Jour. of Appl. Mech. , 57 , pp 57 – 65 ( 1990 ).
  • Kulkarni , S. M. , Hahn , G. T. , Rubin , C. A. and Bhargava , V. , “ Elasto-Plastic Finite Element Analysis of Three-Dimensional Pure Rolling Contact Above the Shakedown Limit ,” ASME Jour. of Appl. Mech. , 58 , pp 347 – 353 ( 1991 ).
  • Bhargava , V. , Hahn , G. T. and Rubin , C. A. , “ An Elastic-Plastic Finite Element Model of Rolling Contact ,” ASME Jour. of Appl. Mech. , 52 , pp 67 – 74 ( 1995 ).
  • Howell , M. , Hahn , G. T. , Rubin , C. A. and McDowell , D. L. , “ Finite Element Analysis of Rolling Contact for Nonlinear Kinematic Hardening Bearing Steel ,” ASME Jour. of Trib. , 117 , pp 729 – 736 ( 1995 ).
  • de Mul , J. M. , Vress , J. M. and Kuypers , J. C. , “ Influence of Certain Raceway Dent Geometries (3-D) on Crack Stresses and Rating Fatigue Life of Rolling Bearings ,” ASME Jour. of Trib. , 109 , pp 452 – 461 ( 1992 ).
  • Beghini , E. , Dwyer-Joyce , R. S. , Ioannides , E. , Jacobson , B. , Lubrecht , A. A. and Tripp , J. H. , “ Elastic/Plastic Contact and Endurance Life Predication ,” Jour. of Phys., D: Applied Physics , 25 , pp 379 – 383 ( 1992 ).
  • Lubrecht , A. A. , Dwyer-Joyce , R. S. and Ioannides , E. , “ Analysis of the Influence of Indentation on Contact Life ,” in Proc. of 18th Leeds-Lyon Symp. on Trib. , Lyon , pp 173 – 182 ( 1991 ).
  • Ko , C. N. and Ioannides , E. , “ Debris Denting—The Associated Residual Stresses and Their Effect on the Fatigue Life of Rolling Bearings: FEM Analysis ,” in Proc. of the 15th Leeds-Lyon Symp. on Trib. , Leeds , pp 199 – 210 ( 1988 ).
  • Hahn , G. T. , Bhargava , V. , Rubin , C. A. , Chen , Q. and Kim , K. , “ Analysis of the Rolling Contact Residual Stresses and Cyclic Plastic Deformation of SAE 52100 Steel Ball Bearings ,” ASME Jour. of Trib. , 109 , pp 618 – 626 ( 1987 ).
  • Cheng , W. and Cheng , H. S. , “ Longitudinal Crack Initiation Under Pure Rolling Contact Fatigue ,” Trib. Trans. , 37 , pp 51 – 58 ( 1994 ).
  • Hamer , J. C. , Sayles , R. S. and Ioannides , E. , “ Particle Deformation and Counterface Damage When Relatively Soft Particles are Squashed Between Hard Anvils ,” Trib. Trans. , 32 , pp 281 – 288 ( 1989 ).
  • Hamer , J. C. , Lubrecht , A. A. , Ioannides , E. and Sayles , R. S. , “ Surface Damage on Rolling Elements and its Subsequent Effects on Performance and Life ,” in Proc. of the 15th Leeds-Lyon Symp. on Trib. , pp 189 – 198 ( 1988 ).
  • Hamer , J. C. , Sayles , R. S. and Ioannides , E. , “ Deformation Mechanisms and Stresses Created by Third-Body Debris Contacts and Their Effects on Rolling Bearing Fatigue ,” in Proc. 14th Leeds-Lyon Symp. on Trib. , pp 201 – 208 ( 1987 ).
  • Gupta , V. , Hahn , G. T. , Bastias , P. C. and Rubin , C. A. , “ Contribution of Surface Irregularities to Rolling Contact Plasticity in Bearing Steels ,” ASME Jour. of Trib. , 117 , pp 660 – 666 ( 1995 ).
  • Johnson , K. L. , “ The Strength of Surfaces in Rolling Contact ,” Jour. of Mech. Eng. Sci. , 203 , pp 151 – 163 ( 1989 ).
  • Ioannides , E. and Harris , T. A. , “ A New Fatigue Life Model for Rolling Bearings ,” ASME Jour. of Trib. , 107 , pp 367 – 378 ( 1985 ).
  • Lubrecht , A. A. , Venner , C. H. , Lane , S. , Jacobson , B. and Ioannides , E. , “ Surface Damage, Comparison of Theoretical and Experimental Endurance Lives of Rolling Bearing ,” in Proc. of the Japan Int'l. Trib. Conf. , Nagoya , pp 185 – 190 ( 1990 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.