REFERENCES
- Narutaki , N. , Yamane , Y. , Hayashi , K. and Kitagawa , T. , “ High-Speed Machining of Inconel 718 with Ceramic Tools,” Annals of the CIRP , 42 , 1 , pp 102 – 106 ( 1993 ).
- Bellows , G. and Niemi , R. M. , “ Surface Integrity of Machined Inconel 718 Alloy ,” SME 1Q71-239 , ( 1971 ).
- Ezugwu , E. O. and Tang , S. H. , “ Surface Abuse When Machining Cast Iron (G17) and Nickel-Based Superalloy (Inconel 718) with Ceramic Tools,” Jour. of Mat. Proc. Tech. , 55 , pp 63 – 69 ( 1995 ).
- Porat , R. and Cassuto , Y. , “ A Comparison Between CVD and PVD Coated Cemented Carbide Cutting Tools,” Jour. of Phys., CS , pp 803 – 811 ( 1989 ).
- Knotek , O. , Loffler , F. and Beele , W. , “ Comparison of Abrasion Model Test Results and Machining Tests with PVD-Coated Indexable Inserts,” Wear , 162 , pp 1033 – 1039 ( 1993 ).
- Knotek , O. , Loffler , F. and Kramer , G. , “ PVD Coatings of Complex Compositions and Structure for Cutting Tools,” Jour. of Surf. Modification Tech. , 6 , pp 465 – 483 ( 1993 ).
- Minevich , A. A. , “ Wear of Cemented Carbide Cutting Inserts with Multilayer Ti-based PVD Coatings,” Surf. and Coat. Tech. , 53 , pp 161 – 170 ( 1992 ).
- Knotek , O. , Loffler , F. and Kramer , G. , Performance Behavior of Physical-Vapor-Deposition-Coated Cermets in Interrupted-Cut Machining,” Surf. and Coat. Tech. , 62 , pp 699 – 673 ( 1993 ).
- Konig , W. R. and Kammermeier , D. , “ New Approaches to Characterizing the Performance of Coated Cutting Tools,” Annals of CIRP , 44 , 1 , pp 49 – 54 ( 1992 ).
- Wang , Z. , Ezugwu , E. O. and Su , D. , “Deep Hole Precision Machining Method of Difficult-to-Cut Materials,” in Proc. of the 7th ICPE and 4th ICHT, Tokyo , pp 437 – 441 ( 1994 ).
- Gates , A. S. and Peters , R. L. , “ Structure and Wear of Coated Cemented Carbides,” The Carbide and Tool Jour. , pp 28 – 33 ( 1982 ).
- Thomas , H. and Donald , G. , “ How Effective Are The Carbide Coatings,” Modern Machine Shop , pp 78 – 81 ( 1981 ).
- Wang , Z. M. , “ Machining of Aerospace Superalloys with Coated (PVD and CVD) Carbides and Self-Propelled Rotary Tools ,” PhD Dissertation, South Bank University, London, ( 1996 ).
- Boothroyd , G and Knight , W. A. , “ Fundamentals of Metal Cutting and Machine Tools ,” 2nd ed. , Marcel Dekker, Inc. , New York , ( 1989 ).
- Kramer , B. M. , “ On Tool Materials for High Speed Machining,” ASME Trans. , 12 , pp 127 – 140 ( 1984 ).