FINITE-ELEMENT SIMULATION AND VALIDATION OF STEPWISE DRYING OF BANANAS

REFERENCES

• Haghighi , K. , Irudayaraj , J. , Stroshine , R. L. and Sokhansanj , S. 1990 . Grain, Kernel Drying Using the Finite Element Method . Trans. Am. Soc. Agric. Eng. , vol. 33 ( no. 6 ) : pp. 209 – 229 .
   Google Scholar
• Irudayaraj , J. 1990 . Finite Element Simulation of Viscoelastic Biomaterial Behavior Using Drying, Ph.D. thesis , West Lafayatte, IN : Purdue University .
   Google Scholar
• Strommen , I. and Kramer , K. 1994 . New Applications of Heat Pump in Drying Process . Drying Technol.—Int. J. , vol. 12 : pp. 889 – 901 .
   Web of Science ®Google Scholar
• Meyer , J. P. and Greyvenstein , G. P. 1992 . The Drying of Grain with Heat Pumps in South Africa: A Techno-economical Analysis . Int. J. Energy Res. , vol. 16 : pp. 13 – 20 .
   Google Scholar
• Rossi , S. J. , Neues , L. C. and Kicokbusch , T. G. 1992 . “ Thermodynamic and Energetic Evaluation of a Heat Pump Applied to the Drying of Vegetables ” . In Drying'92 , Edited by: Mujumdar , A. S. pp. 1475 – 1478 . London : Elsevier Science .
   Google Scholar
• Chua , K. J. , Mujumdar , A. S. , Hawaldar , M. N. A. , Chou , S. K. and Ho , J. C. 2001 . Batch Drying of Banana Pieces—Effect of Stepwise Change in Drying Air Temperature on Drying Kinetics and Product Color . Food Res. Int. , vol. 34 : pp. 721 – 731 .
   Google Scholar
• Luikov , A. 1975 . Heat and Mass Transfer in Capillary-Porous Bodies London, , England : Pergamon Press, Oxford, .
   Google Scholar
• Ranjan , R. , Irudayaraj , J. and Jun , S. 2002 . Simulation of Three-Dimensional Infrared Drying Using a Set of Three Coupled Equations with the Control Volume Method . Trans. Am. Soc. Agric. Eng. , vol. 45 ( no. 5 ) : pp. 1661 – 1668 .
   Google Scholar
• Ranjan , R. , Irudayaraj , J. and Jun , S. 2002 . Simulation of Infrared Drying Process . Drying Technol. , vol. 20 ( no. 2 ) : pp. 363 – 379 .
   Web of Science ®Google Scholar
• Irudayaraj , J. and Wu , Y. 1999 . Numerical Modeling of Heat and Mass Transfer in Starch Systems . Trans. Am. Soc. Agric. Eng. , vol. 42 ( no. 2 ) : pp. 449 – 455 .
   Google Scholar
• Irudayaraj , J. , Haghighi , K. and Stroshine , R. L. 1992 . Finite Element Analysis of Drying with Application to Cereal Grains . J. Agric. Eng. Res. , vol. 53 ( no. 4 ) : pp. 209 – 229 .
   Google Scholar
• Zhou , L. , Puri , V. M. , Anantheswaran , R. C. and Yeh , G. 1995 . Finite Element Modeling of Heat and Mass Transfer in Food Materials during Microwave Heating—Model Development and Validation . J. Food Eng. , vol. 25 ( no. 2 ) : pp. 509 – 529 .
   Google Scholar
• Islam , M. R. , Ho , J. C. and Mujumdar , A. S. 2003 . Convective Drying with Time-Varying Heat Input: Simulation Results . Drying Technol.—Int. J. , vol. 21 ( no. 7 ) (in press)
   Google Scholar
• Jia , W. L. , Islam , M. R. and Mujumdar , A. S. 2003 . A Simulation Study on Convective and Microwave Drying of Different Food Products . Drying Technol.—Int. J. , vol. 21 ( no. 8 ) (in press)
   Google Scholar
• Parasertsan , S. and Sean-Saby , P. 1998 . Heat Pump Drying of Agricultural Materials . Drying Technol. , vol. 16 ( no. 12 ) : pp. 235 – 250 .
   Google Scholar
• Queiroz , M. R. and Nebra , S. A. 2001 . Theoretical and Experimental Analysis of the Drying Kinetics of Bananas . J. Food Eng. , vol. 47 : pp. 127 – 132 .
   Google Scholar
• Reddy , J. N. 1993 . An Introduction to the Finite Element Method , 2d ed. McGraw-Hill, New York
   Google Scholar
• Reddy , J. N. and Gartling , D. K. 2001 . The Finite Element Method in Heat Transfer and Fluid Dynamics , 2nd ed. , Boca Raton, FL : CRC Press .
   Google Scholar
• Chou , S. K. , Hawaldar , M. N. , Ho , J. C. and Chua , K. J. 1998 . An Improved Design of a Heat Pump Tunnel Dryer . Asian J. Sci. Technol. Dev. , vol. 1 : pp. 10 – 18 .
   Google Scholar
• Perre , P. and Degiovanni , A. 1990 . Simulation par volumes finis des transferts couples en milieu poreux anistropes: sechange du bois a basse et a haute temperature . Int J. Heat Mass Transfer , vol. 33 ( no. 11 ) : pp. 2463 – 2478 .
   Google Scholar
• Turner , I. W. and Perre , P. 1995 . A Comparison of the Drying Simulation Codes TRANSPORE and WOOD2D Which Are Used for the Modeling of Two-Dimensional Drying Processes . J. Drying Technol. , vol. 13 ( no. 3 ) : pp. 695 – 735 .
   Web of Science ®Google Scholar
• Toledo , R. 1991 . Fundamentals of Food Process Engineering , 2nd ed. , New York : Chapman & Hall .
   Google Scholar
• Wardrobe Refractories P/L . June 29 2003 . Specific Heat Capacities of Solids and Liquids June 29 , accessed
   Google Scholar
• Singh , R. P. and Heldman , D. 1993 . Introduction to Food Engineering , 2nd ed. , St. Louis, Missouri : Academic Press .
   Google Scholar