Influence of Conical and Annular Nozzle Geometric Configurations on Flow and Heat Transfer Characteristics due to Flow Impingement onto a Flat Plate

REFERENCES

• G. Chochua , W. Shyy , S. Thakur , A. Brankovic , J. Lienau , L. Porter , and D. Lischinsky , A Computational and Experimental Investigation of Turbulent Jet and Crossflow Interaction , Numer. Heat Transfer A , vol. 38 , no. 6 , pp. 557 – 572 , 2000 . [CSA]
   Web of Science ®Google Scholar
• H. Chattopadhyay and S. K. Saha , Numerical Investigations of Heat Transfer over a Moving Surface due to Impinging Knife Jets , Numer. Heat Transfer A , vol. 39 , no. 5 , pp. 531 – 549 , 2001 . [CSA]
   Web of Science ®Google Scholar
• H. B. Aissia , Y. Zaouali , and S. El Golli , Numerical Study of the Influence of Dynamic and Thermal Exit Conditions on Axisymmetric Laminar Buoyant Jet , Numer. Heat Transfer A , vol. 42 , no. 4 , pp. 427 – 444 , 2002 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• S. M. Hatem , M. S. El Golli , G. Le Palec , and P. Bournot , Numerical Study of a Heated Pulsed Axisymmetric Jet in Laminar Mode , Numer. Heat Transfer A , vol. 43 , no. 4 , pp. 409 – 429 , 2003 . [CSA] [CROSSREF]
   Google Scholar
• A. J. Bula , M. M. Rahman , and J. E. Leland , Numerical Modeling of Conjugate Heat Transfer During Impingement of Free Liquid Jet Issuing from a Slot Nozzle , Numer. Heat Transfer A , vol. 38 , no. 1 , pp. 45 – 66 , 2000 . [CSA] [CROSSREF]
   Google Scholar
• A. Y. Tong , A Numerical Study on the Hydrodynamics and Heat Transfer of a Circular Liquid Jet Impinging onto a Substrate , Numer. Heat Transfer A , vol. 44 , no. 1 , pp. 1 – 19 , 2003 . [CSA]
   Web of Science ®Google Scholar
• G. Singh , T. Sundararajan , and U. S. P. Shet , Entrainment and Mixing Studies for a Variable Density Confined Jet , Numer. Heat Transfer A , vol. 35 , no. 2 , pp. 205 – 224 , 1999 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• H. Kawahara and T. Nishimura , Two–Dimensional Simulation in Transitional Jet Diffusion Flame with/without a Duct , Numer. Heat Transfer A , vol. 40 , no. 6 , pp,. 639 – 657 , 2001 . [CSA] [CROSSREF]
   Google Scholar
• I. Sezai and L. B. Y. Aldabbagh , Three-Dimensional Numerical Investigation of Flow and Heat Transfer Characteristics of Inline Jet Arrays , Numer. Heat Transfer A , vol. 45 , no. 3 , pp. 271 – 288 , 2004 . [CSA]
   Web of Science ®Google Scholar
• M. Kumar Tiwari , A. Mukhopadhyay , and D. Sanyal , Numerical Simulation of Optimal Multiple-Input, Multiple-Output Control of Jet Impingement Cooling of a Glass Plate , Numer. Heat Transfer A , vol. 46 , no. 4 , pp. 401 – 424 , 2004 . [CSA] [CROSSREF]
   Google Scholar
• D. Angirasa , Interaction of Low-Velocity Plane Jets with Buoyant Convection Adjacent to Heated Vertical Surfaces , Numer. Heat Transfer A , vol. 35 , no. 1 , pp. 67 – 84 , 2004 . [CSA]
   Google Scholar
• W. Shyy , X. He , and S. Thakur , Jets and Free Stream Interaction around a Low-Reynolds-Number Airfoil Leading Edge , Numer. Heat Transfer A , vol. 35 , no. 8 , pp. 891 – 902 , 1999 . [CSA] [CROSSREF]
   Google Scholar
• H. Fujimoto , H. Takuda , N. Hatta , and R. Viskanta , Numerical Simulation of Transient Cooling of a Hot Solid by an Impinging Free Surface Jet , Numer. Heat Transfer A , vol. 36 , no. 8 , pp. 767 – 780 , 1999 . [CSA] [CROSSREF]
   Google Scholar
• A. Abdon and B. Sunden , Numerical Investigation of Impingement Heat Transfer Using Linear and Nonlinear Two-Equation Turbulence Models , Numer. Heat Transfer A , vol. 40 , no. 6 , pp. 563 – 578 , 2001 . [CSA] [CROSSREF]
   Google Scholar
• L. B. Y. Aldabbagh and I. Sezai , Numerical Simulation of Three-Dimensional Laminar, Square Twin-Jet Impingement on a Flat Plate, Flow Structure, and Heat Transfer , Numer. Heat Transfer A , vol. 41 , no. 8 , pp. 835 – 850 , 2002 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• A. Chatterjee , S. C. Dhingra , and S. S. Kapur , Laminar Impinging Jet Heat Transfer with a Purely Viscous Inelastic Fluid, Numer. Heat Transfer A , vol. 42, no. 1, pp. 193–213, 2002. [CSA] [CROSSREF]
   Google Scholar
• S. Z. Shuja , Laser Heating of a Moving Slab in the Presence of an Impinging Gas Jet: Influence of Slab Velocity , Numer. Heat Transfer A , vol. 42 , no. 7 , pp. 757 – 775 , 2002 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• S. Y. Kim and A. V. Kuznetsov , Optimization of Pin-Fin Heat Sinks Using Anisotropic Local Thermal Nonequilibrium Porous Model in a Jet Impinging Channel , Numer. Heat Transfer A , vol. 44 , no. 8 , pp. 771 – 787 , 2003 . [CSA]
   Web of Science ®Google Scholar
• D. Kim , W. Kim , and A. V. Kuznetsov , Analysis of Coupled Turbulent Flow and Solidification in the Wedge-Shaped Pool with Different Nozzles during Twin-Roll Strip Casting , Numer. Heat Transfer A , vol. 41 , no. 1 , pp. 1 – 17 , 2002 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• M. Ruhul Amin and A. Mahajan , Numerical Investigation of the Effects of Turbulence from Submerged Entry Nozzle during Continuous Casting Process , Numer. Heat Transfer A , vol. 46 , no. 3 , pp. 221 – 240 , 2004 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• M. K. Tiwari , A. Mukhopadhyay , and D. Sanyal , Numerical Simulation of Optimal Multiple-Input, Multiple-Output Control of Jet Impingement Cooling of a Glass Plate , Numer. Heat Transfer A , vol. 46 , no. 4 , pp. 401 – 424 , 2004 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• A. Chatterjee and L. J. Deviprasath , Heat Transfer in Confined Laminar Axisymmetric Impinging Jets at Small Nozzle-Plate Distances: The Role of Upstream Vorticity Diffusion , Numer. Heat Transfer A , vol. 39 , no. 8 , pp. 777 – 800 , 2001 . [CSA]
   Google Scholar
• T. J. Craft , L. J. W. Graham , and B. E. Launder , Impinging Jet Studies for Turbulence Model Assessment: An Examination of the Performance of Four Turbulence Models , Int. J. Heat Mass Transfer , vol. 36 , no. 10 , pp. 2685 – 2697 , 1993 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• W. C. Lasher and D. B. Taulbee , Reynolds Stress Model Assessment Using Round Jet Experimental Data , Int. J. Heat Fluid Flow , vol. 15 , no. 5 , pp. 357 – 363 , 1994 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• S. Ashforth-Frost and K. Jambunathan , Numerical Prediction of Semi-confined Jet Impingement and Comparisons with Experimental Data , Int. J. Numer. Meth. Fluids , vol. 23 , pp. 295 – 306 , 1996 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• I. Sezai and A. A. Mohamad , Three-Dimensional Simulation of Laminar Rectangular Impinging Jets, Flow Structure, and Heat Transfer , ASME J. Heat Transfer , vol. 121 , pp. 50 – 56 , 1999 . [CSA]
   Web of Science ®Google Scholar
• G. K. Morris , S. V. Garimella , and R. S. Amano , Prediction of Jet Impingement Heat Transfer Using a Hybrid Wall Treatment With Different Turbulent Prandtl Number Functions , ASME J. Heat Transfer , vol. 118 , pp. 562 – 569 , 1996 . [CSA]
   Web of Science ®Google Scholar
• J. W. Baughn and S. Shimizu , Heat Transfer Measurements from a Surface with Uniform Heat Flux and an Impinging Jet , ASME J. Heat Transfer , vol. 111 , pp. 1096 – 1098 , 1996 . [CSA]
   Google Scholar
• K. Jambunathan , E. Lai , M. A. Moss , and B. L. Button , A Review of Heat Transfer Data for Single Circular Jet Impingement , Int. J. Heat Fluid Flow , vol. 13 , pp. 106 – 115 , 1992 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• D. H. Wolf , R. Viskanta , and F. P. Incropera , Turbulence Dissipation in a Free-Surface Jet of Water and its Effects on Local Impingement Heat Transfer from a Heated Surface: Part 1—Flow Structure , ASME J. Heat Transfer , vol. 117 , pp. 85 – 94 , 1995 . [CSA]
   Web of Science ®Google Scholar
• D. H. Wolf , R. Viskanta , and F. P. Incropera , Turbulence Dissipation in a Free-Surface Jet of Water and Its Effects on Local Impingement Heat Transfer from a Heated Surface: Part 2—Local Heat Transfer , ASME J. Heat Transfer , vol. 117 , pp. 95 – 103 , 1995 . [CSA]
   Web of Science ®Google Scholar
• M. Dianat , M. Fairweather , and W. P. Jones , Predictions of Axisymmetric and Two-Dimensional Impinging Turbulent Jets , Int. J. Heat Fluid Flow , vol. 17 , no. 6 , pp. 530 – 538 , 1996 . [CSA] [CROSSREF]
   Google Scholar
• P. M. Ilavarasan and P. A. Molian , Design, Fabrication and Testing of an Off-axial Gas Jet Nozzle for Enhanced Laser Cutting , Proc. Laser Materials Proceeding Conf. (1993) , pp. 350 – 360 , Laser Institute of America , Orlando , Florida , USA , 1994 .
   Google Scholar
• R. Edlet , P . Berger , and H . Huegl , Performance of Various Nozzle Designs in Laser Cutting, in B. L. Mordike (ed.), Laser Treatment of Materials , pp. 111–116, DGM Informationsges , Berlin , Germany, 1992.
   Google Scholar
• B. Juckenath , S. Biermann , and H. W. Bergmann , Cutting of Aluminum Alloys Using High Pressure Coaxial Nozzle , Proc. Material Processing Conf., ICALEO'89 , pp. 216 – 227 , Laser Institute of America , Orlando , Florida , USA , 1989 .
   Google Scholar
• P. S. Chinnoek and R. H. Page , Heat Transfer Enhancement with a Self-oscillating Jet Impingement Nozzle , in G. F. Hewitt (ed.), Proc. Int. Heat Transfer Conf. , 19 – 24 , Institute of Chemical Engineering , Brighton , UK , 1994 .
   Google Scholar
• G. Yang , M. Choi , and J. S. Lee , An Experimental Study of Slot Jet Impingement Cooling on Concave Surface: Effects of Nozzle Configuration and Curvature , Int. J. Heat Mass Transfer , vol. 42 , no. 12 , pp. 2199 – 2209 , 1999 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• J. Seyed-Yagoobi , Enhancement of Heat and Mass Transfer with Innovative Impinging Jets , Drying Technol. , vol. 14 , no. 5 , pp. 1173 – 1196 , 1996 . [CSA]
   Web of Science ®Google Scholar
• D. Lytle and B. W. Webb , Air Jet Impingement Heat Transfer at Low Nozzle-Plate Spacings , Int. J. Heat Mass Transfer , vol. 37 , no. 12 , pp. 1687 – 1697 , 1994 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• D. W. Colucci and R. Viskanta , Effect of Nozzle Geometry on Local Convective Heat Transfer to a Confined Impinging Air Jet , Exp. Thermal Fluid Sci. , vol. 13 , no. 1 , pp. 71 – 80 , 1996 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• B. E. Launder , Second-Moment Closure and Its Use in Modelling Turbulent Industrial Flows , Int. J. Numer. Meth. Fluids , vol. 9 , pp. 963 – 985 , 1989 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• C. Benocci , Introduction to the Modeling of Turbulence , 1991–02, lecture notes , Von Karman Institute for Fluid Dynamics , The Netherlands , 1991 .
   Google Scholar
• S. Hogg and M. A. Leschziner , Second-Moment-Closure Calculation of Strongly Swirling Confined Flow with Large Density Gradients , Int. J. Heat Fluid Flow , vol. 10 , no. 1 , pp. 16 – 27 , 1989 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• H. K. Versteeg and W. Malalasekera , An Introduction to Computational Fluid Dynamics: The Finite Volume Method , Longman Scientific and Technical , New York , 1995 .
   Google Scholar
• D. Cooper , D. C. Jackson , B. E. Launder , and G. X. Liao , Impinging Jet Studies for Turbulence Model Assessment—I: Flow–Field Experiments , Int. J. Heat Mass Transfer , vol. 36 , pp. 2675 – 2684 , 1993 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• D. Elkaim , M. Reggio , and R. Camarero , Simulating Two-Dimensional Turbulent Flow by Using the k–ε model and the Vorticity-Stream Function Formulation , Int. J. Numer. Meth. Fluids , vol. 14 , pp. 961 – 980 , 1992 . [CSA] [CROSSREF]
   Web of Science ®Google Scholar
• S. V. Patankar , Numerical Heat Transfer , McGraw-Hill , New York , 1980 .
   Google Scholar