Computational Investigation of Film Cooling from Trenched Holes Near the Leading Edge of a Turbine Blade

REFERENCES

• V. K. Garg , Heat Transfer on a Film-Cooled Rotating Blade, NASA Rep. NASA/CR-1999–209301, NASA Glenn Research Center , Cleveland , OH , 1999 .
   Google Scholar
• A. Azzi , M. Abidat , B. A. Jubran , and G. S. Theodoridis , Film Cooling Predictions of Simple and Compound Angle Injection from One and Two Staggered Rows , Numer. Heat Transfer A , vol. 40 , pp. 273 – 294 , 2001 .
   Web of Science ®Google Scholar
• S. Sarkar and T. K. Bose , Comparison of Different Turbulence Models for Prediction of Slot-Film Cooling: Flow and Temperature Field , Numer. Heat Transfer B , vol. 28 , pp. 217 – 238 , 1995 .
   Web of Science ®Google Scholar
• M. W. Cruse , U. M. Yuki , and D. Bogard , Investigation of Various Parametric Influences on Leading Edge Film Cooling , in Int. Gas Turbine & Aero Engine Congress & Exhibition , Orlando , FL , 1997 , ASME Paper 97-GT-296 .
   Google Scholar
• M. Salcudean , I. Gartshore , K. Zhang , and I. McLean , An Experimental Study of Film Cooling Effectiveness near the Leading Edge of a Turbine Blade , J. Turbomachinery , vol. 116 , pp. 71 – 79 , 1994 .
   Web of Science ®Google Scholar
• V. K. Garg and R. E. Gaugler , Leading Edge Film Cooling on Turbine Blade Heat Transfer , Numer. Heat Transfer A , vol. 30 , pp. 165 – 187 , 1996 .
   Web of Science ®Google Scholar
• A. Azzi and B. A. Jubran , Influence of Leading-Edge Lateral Injection Angles on the Film Cooling Effectiveness of a Gas Turbine Blade , Heat Mass Transfer , vol. 40 , pp. 501 – 508 , 2004 .
   Google Scholar
• W. Haslinger and D. K. Hennecke , Highly Resolved Distribution of Adiabatic Film Cooling Effectiveness for Turbine Leading Edge Film Cooling , in Proc. 13th Int. Symp. Air Breathing Engines , Chattanooga , TN , ISBE 97–7113 , American Institute of Aeronautics and Astronautics , 1997 .
   Google Scholar
• D. Lakehal , G. S. Theodoridis , and W. Rodi , Three-Dimensional Flow and Heat Transfer Calculations of Film Cooling at the Leading Edge of a Symmetrical Turbine Blade Model , Int. J. Heat Fluid Flow , vol. 22 , pp. 113 – 122 , 2001 .
   Web of Science ®Google Scholar
• Y. J. Kim and S. M. Kim , Influence of Shaped Injection Holes on Turbine Blade Leading Edge Film Cooling , Int. J. Heat Mass Transfer , vol. 47 , pp. 245 – 256 , 2004 .
   Web of Science ®Google Scholar
• C. Falcoz , B. Weigand , and P. Ott , Experimental Investigations on Showerhead Cooling on a Blunt Body , Int. J. Heat Mass Transfer , vol. 49 , pp. 1287 – 1298 , 2006 .
   Google Scholar
• J. C. Han and S. Teng , Effect of Film-Hole Shape on Turbine Blade Film Cooling Performance, NASA Rep. NASA/CR-2000–209932, Glenn Research Center , Cleveland , OH , 2000 .
   Google Scholar
• R. S. Bunker , J. C. Bailey , C. P. Lee , and N. Abuaf , Method for Improving the Cooling Effectiveness of a Gaseous Coolant Stream, and Related Articles of Manufacture, U.S. Patent 6,234,755 B1 , 2001 .
   Google Scholar
• R. S. Bunker , Film Cooling Effectiveness due to Discrete Holes within Transverse Surface Slots, Technical Information Series, 2001CRD204, GE Research & Development Center, U.S. , 2002 .
   Google Scholar
• M. S. Altorairi , Film Cooling from Cylindrical Holes in Transverse Slots, M.S. thesis, Louisiana State University, Agricultural and Mechanical College , 2003 .
   Google Scholar
• Y. Lu and S. V. Ekkad , Predictions of Film Cooling from Cylindrical Holes Embedded in Trenches, 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conf. , San Francisco , CA, 2006, AIAA Paper 2006–3401.
   Google Scholar
• S. Majumdar , W. Rodi , and J. Zhu , Three-Dimensional Finite-Volume Method for Incompressible Flows with Complex Boundaries , J. Fluids Eng. , vol. 114 , pp. 496 – 503 , 1992 .
   Web of Science ®Google Scholar
• Z. G. Qu , Q. Q. Tao , and Y. L. He , An Improved Numerical Scheme for the SIMPLER Method on Nonorthogonal Curvilinear Coordinates: SIMPLERM , Numer. Heat Transfer , vol. 51 , pp. 43 – 66 , 2007 .
   Web of Science ®Google Scholar
• D. L. Schmidt , B. Sen , and D. G. Bogard , Film Cooling with Compound Angle Holes: Adiabatic Effectiveness , J. Turbomachinery , vol. 118 , pp. 807 – 813 , 1996 .
   Web of Science ®Google Scholar
• A. Amer , B. A. Jubran , and M. A. Hamdan , Comparison of Different Two-Equation Turbulence Models for Prediction of Film Cooling from Two Rows of Holes , Numer. Heat Transfer A , vol. 21 , pp. 143 – 162 , 1992 .
   Web of Science ®Google Scholar