Thermal Resistance Minimization of a Fin-and-Porous-Medium Heat Sink with Evolutionary Algorithms

REFERENCES

• L. Gosselin and A. K. da Silva , When to Fill a Tube with Thermal Enhancers, and When to Leave It Empty , Energy Conversion Management , vol. 48 , pp. 2356 – 2364 , 2007 .
   Google Scholar
• K. S. Yang , C. M. Chiang , Y.-T. Lin , K.-H. Chien , and C.-C. Wang , On the Heat Transfer Characteristics of Heat Sinks: Influence of Fin Spacing at Low Reynolds Number Region , Int. J. Heat Mass Transfer , vol. 50 , pp. 2667 – 2674 , 2007 .
   Web of Science ®Google Scholar
• J. R. Culham , W. A. Khan , M. M. Yovanovich , and Y. S. Muzychka , The Influence of Material Properties and Spreading Resistance in the Thermal Design of Plate Fin Heat Sinks , J. Electronic Packaging , vol. 129 , pp. 76 – 81 , 2007 .
   Google Scholar
• B. M. Dempsey , S. Eisele , and D. L. McDowell , Heat Sink Applications of Extruded Metal Honeycombs , Int. J. Heat Mass Transfer , vol. 48 , pp. 527 – 535 , 2005 .
   Web of Science ®Google Scholar
• A. M. Morega , A. Bejan , and S. W. Lee , Free-Stream Cooling of a Stack of Parallel Plates , Int. J. Heat Mass Transfer , vol. 38 , pp. 519 – 531 , 1995 .
   Web of Science ®Google Scholar
• T. Bello-Ochende , L. Liebenberg , and J. P. Meyer , Constructal Cooling Channels for Micro-channel Heat Sinks , Int. J. Heat Mass Transfer , vol. 50 , pp. 4141 – 4150 , 2007 .
   Web of Science ®Google Scholar
• K. T. Chiang , Modeling and Optimization of Designing Parameters for a Parallel-Plain fin Heat Sink with Confined Impinging Jet Using the Response Surface Methodology, Appl. Thermal Eng. , vol. 27, pp. 2473–2482, 2007.
   Web of Science ®Google Scholar
• S. Z. Shuja , S. M. Zubair , and S. Z. Shazli , Optimization of a Finned Heat Sink Array Based on Thermoeconomic Analysis , Int. J. Energy Res. , vol. 31 , pp. 455 – 471 , 2007 .
   Web of Science ®Google Scholar
• J. Banhart , Manufacture, Characterisation and Application of Cellular Metals and Metal Foams , Prog. Mater. Sci. , vol. 46 , pp. 559 – 632 , 2001 .
   Web of Science ®Google Scholar
• T. M. Jeng and S. C. Tzeng , Forced Convection of Metallic Foam Heat Sink under Laminar Slot Jet Confined by Parallel Wall , Heat Transfer Eng. , vol. 28 , pp. 484 – 495 , 2007 .
   Web of Science ®Google Scholar
• C. Villemure , L. Gosselin , and G. Gendron , Minimizing Hot Spot Temperature of Porous Stackings in Natural Convection , Int. J. Heat Mass Transfer , ( in press ) 2008 .
   Google Scholar
• G. Leblond and L. Gosselin , Effect of Non-local Equilibrium on Minimal Thermal Resistance Porous Layered Systems , Int. J. Heat Fluid Flow , vol. 29 , no. 1 , pp. 281 – 291 , 2008 .
   Google Scholar
• P. Wildi-Tremblay and L. Gosselin , Layered Porous Media Architecture for Maximal Cooling , Int. J. Heat Mass Transfer , vol. 50 , pp. 464 – 478 , 2007 .
   Web of Science ®Google Scholar
• T. Fend , R. Pitz-Paal , O. Reutter , J. Bauer , and B. Hoffschmidt , Two Novel High-Porosity Materials as Volumetric Receivers for Concentrated Solar Radiation , Solar Energy Mater. Sol. Cells , vol. 84 , pp. 291 – 304 , 2004 .
   Web of Science ®Google Scholar
• K. H. Ko and N. K. Anand , Use of Porous Baffles to Enhance Heat Transfer in a Rectangular Channel , Int. J. Heat Mass Transfer , vol. 46 , pp. 4191 – 4199 , 2003 .
   Web of Science ®Google Scholar
• Y. T. Yang and C. Z. Hwang , Calculation of Turbulent Flow and Heat Transfer in a Porous-Baffled Channel , Int. J. Heat Mass Transfer , vol. 46 , pp. 771 – 780 , 2003 .
   Web of Science ®Google Scholar
• J. Tian , T. J. Lu , H. P. Hodson , D. T. Queheillat , and H. N. G. Wadley , Cross Flow Heat Exchange of Textile Cellular Metal Core Sandwich Panels , Int. J. Heat Mass Transfer , vol. 50 , pp. 2521 – 2536 , 2007 .
   Google Scholar
• Q. J. Yu , A. G. Straatman , and B. E. Thompson , Carbon-Foam Finned Tubes in Air-Water Heat Exchangers , Appl. Thermal Eng. , vol. 26 , pp. 131 – 143 , 2006 .
   Web of Science ®Google Scholar
• S. Chikh , A. Boumedien , K. Bouhadef , and G. Lauriat , Heat Transfer Enhancement by Porous Substrate Addition on the Inner Wall of a Tubular Heat Exchanger , Revue générale de thermique (Int. J. Thermal Sci.) , vol. 36 , pp. 41 – 50 , 1997 .
   Google Scholar
• N. Yucel and R. T. Guven , Forced-Convection Cooling. Enhancement of Heated Elements in Parallel-Plate Channels Using Porous Inserts , Numer. Heat Transfer A , vol. 51 , pp. 293 – 312 , 2007 .
   Web of Science ®Google Scholar
• A. Bhattacharya and R. L. Mahajan , Metal Foam and Finned Metal Foam Heat Sinks for Electronics Cooling in Buoyancy-Induced Convection , J. Electronic Packaging , vol. 128 , pp. 259 – 266 , 2006 .
   Web of Science ®Google Scholar
• K. Boomsma , D. Poulikakos , and F. Zwick , Metal Foams as Compact High Performance Heat Exchangers , Mech. Mater. , vol. 35 , pp. 1161 – 1176 , 2003 .
   Web of Science ®Google Scholar
• Y. Varol , H. F. Oztop , and A. Varol , Effects of Thin Fin on Natural Convection in Porous Triangular Enclosures , Int. J. Thermal Sci. , vol. 46 , pp. 1033 – 1045 , 2007 .
   Web of Science ®Google Scholar
• Y. Varol , H. F. Oztop , and A. Varol , Natural Convection in Porous Triangular Enclosures with a Solid Adiabatic Fin Attached to the Horizontal Wall , Int. Commun. Heat Mass Transfer , vol. 34 , pp. 19 – 27 , 2007 .
   Web of Science ®Google Scholar
• S. V. Naidu , V. D. Rao , P. K. Sarma , and T. Subrahmanyam , Performance of a Circular Fin in a Cylindrical Porous Enclosure , Int. Commun. Heat Mass Transfer , vol. 31 , pp. 1209 – 1218 , 2004 .
   Web of Science ®Google Scholar
• S. Kiwan and M. A. Al-Nimr , Using Porous Fins for Heat Transfer Enhancement , ASME J. Heat Transfer , vol. 123 , pp. 790 – 795 , 2001 .
   Web of Science ®Google Scholar
• A. Z. Vaszi , L. Elliott , D. B. Ingham , and I. Pop , Conjugate Free Convection from Vertical Fins Embedded in a Porous Medium, Numer. Heat Transfer A , vol. 44, pp. 743–770, 2003.
   Web of Science ®Google Scholar
• S. Y. Kim and A. V. Kuznetsov , Optimization of Pin-Fin Heat Sinks Using Anisotropic Local Thermal Nonequilibrium Porous Model in a Jet Impinging Channel , Numer. Heat Transfer A , vol. 44 , pp. 771 – 787 , 2003 .
   Web of Science ®Google Scholar
• F. Bobaru and S. Rachakonda , Optimal Shape Profiles for Cooling Fins of High and Low Conductivity , Int. J. Heat Mass Transfer , vol. 47 , pp. 4953 – 4966 , 2004 .
   Web of Science ®Google Scholar
• A. Bejan , Convection Heat Transfer, , 3d ed. , chap. 12 , Wiley , New York , 2004 .
   Google Scholar
• A. Bhattacharya , V. V. Calmidi , and R. L. Mahajan , Thermophysical properties of High Porosity Metal Foams , Int. J. Heat Mass Transfer , vol. 45 , pp. 1017 – 1031 , 2002 .
   Web of Science ®Google Scholar
• P. Du Plessis , A. Montillet , J. Comiti , and J. Legrand , Pressure Drop Prediction for Flow through High Porosity Metallic Foams , Chem. Eng. Sci. , vol. 49 , pp. 3545 – 3553 , 1994 .
   Web of Science ®Google Scholar
• S. J. Kim and S. P. Jang , Effects of the Darcy Number, the Prandtl Number, and the Reynolds Number on Local Thermal Non-equilibrium , Int. J. Heat Mass Transfer , vol. 45 , pp. 3885 – 3896 , 2002 .
   Web of Science ®Google Scholar
• S. J. Kim , D. Kim , and D. Y. Lee , On the Local Thermal Equilibrium in Microchannel Heat Sinks , Int. J. Heat Mass Transfer , vol. 43 , pp. 1735 – 1748 , 2000 .
   Web of Science ®Google Scholar
• T. M. Jeng and S. C. Tzeng , Numerical Study of Confined Slot Jet Impinging on Porous Metallic Foam Heat Sink , Int. J. Heat Mass Transfer , vol. 48 , pp. 4685 – 4694 , 2005 .
   Web of Science ®Google Scholar
• A. Chipperfield , P. Fleming , H. Pohlheim , and C. Fonseca , Genetic Algorithm Toolbox for Use with Matlab , IEE Colloquium on Applied Control Techniques Using Matlab 14 , pp. 10-1 – 10-4 , 1995 .
   Google Scholar