Heat and Mass Transfer Modeling and Simulation during Liquid Route Processing of SiC/Ti Filamentary Composites

REFERENCES

• P. D. Nicolaou , H. R. Piehler , and M. A. Kuhni , Fabrication of Ti-6Al-4 V Matrix, SCS-6 Fiber Composites by Hot Pressing using the Foil-Fiber-Foil Technique , In K. Upadyahya , ed., Developments in Ceramic and Metal-Matrix Composites , pp. 37 – 47 , 1992 .
   Google Scholar
• C. M. Cooke , D. Eylon , and F. H. Froes , Development of Rapidly Solidified Titanium Matrix Composites , Proc. of Sixth World Conference on Titanium , pp. 913 – 917 , 1988 .
   Google Scholar
• H. J. Dudek , R. Leucht , and G. Ziegler , SiC-Fibre Reinforced Titanium Alloys: Processing, Interfaces and Mechanical Properties , Proc. of ECCM 4 , pp. 339 – 344 , 1990 .
   Google Scholar
• S. G. Warrier and R. Y. Lin , Using Rapid Infrared Forming to Control Interfaces in Titanium-Matrix Composites , J. of Mater. , vol. 15 , no. 3 , pp. 24 – 27 , 1993 .
   Google Scholar
• B. Toloui , Development of Carbon Fibre Reinforced Titanium-Copper Composites , Proc. of ICCM 5 , pp. 773 – 777 , 1985 .
   Google Scholar
• B. Dambrine , M. Garnier , J. Hamburger , Y. Honnorat , and L. Molliex , Procédé d'enduction métallique de fibres par voie liquide, French Patent 9800644, Jan 1998.
   Google Scholar
• O. P. Solonina and N. M. Ulyakova , Effect of Carbon on the Mechanical Properties and Structure of Titanium Alloys , Titanium and Its Alloys , vol. 4 , pp. 28 – 30 , 1974 .
   Google Scholar
• K. Landry and N. Eustathopoulos , Dynamics of Wetting in Reactive Metal/Ceramic Systems: Linear Spreading , Acta Materialia , vol. 44 , no. 10 , pp. 3923 – 3932 , 1996 .
   Web of Science ®Google Scholar
• T. B. Massalski , Binary Alloy Diagrams, , 2nd ed. , vol. 1 , pp. 888 – 891 , American Society for Metals , Metals Park , OH , 1990 .
   Google Scholar
• C. Duda , C. Arvieu , J. F. Fromentin , and J. M. Quenisset , Microstructural Characterization of Liquid Route Processed Ti6242 Coating of SCS-6 Filaments , Composites Part A , vol. 35 , pp. 511 – 517 , 2004 .
   Web of Science ®Google Scholar
• J. Feigenblum , Procédé inductif d'enduction métallique de fibres par voie liquide, PhD thesis Grenoble Institute of Technology (France) , 2002 .
   Google Scholar
• L. Landau and B. Levich , Dragging of a Liquid by a Moving Plate , Acta Physicochim USSR , vol. 17 , p. 42 , 1942 .
   Google Scholar
• B. Derjaguin , On the Thickness of the Liquid Film Adhering to the Walls of a Vessel After Emptying , Acta Physicochim USSR , vol. 20 , p. 349 , 1943 .
   Google Scholar
• D. Quere and A. De Ryck , Le Mouillage Dynamique Des Fibres , Annales de Physique , vol. 23 , no. 1 , pp. 1 – 149 , 1998 .
   Google Scholar
• V. R. Voller and C. R. Swaminathan , General Source-Based Method for Solidification Phase Change , Numer. Heat Transfer B , vol. 19 , pp. 175 – 189 , 1991 .
   Web of Science ®Google Scholar
• O. Mantaux , E. Lacoste , and M. Danis , Conduction Avec Changement de Phase Dans un Corps pur: Résolution en Température , Revue Générale de Thermique , vol. 402 , no. 34 , pp. 339 – 347 , 1995 .
   Google Scholar
• C. Duda , Compréhension et amélioration des conditions de couplage par enduction a grande vitesse entre filaments SiCCVD et alliage base titane, PhD thesis, University Bordeaux 1, no. 2864 , 2004 .
   Google Scholar
• C. Arvieu , C. Duda , J. M. Franchet , P. E. Frayssines , J. F. Fromentin , and J. M. Quenisset , Procédé d'enduction métallique de fibres par voie liquide, French Patent 0553008 , 2005 .
   Google Scholar
• C. Arvieu , C. Duda , J. M. Quenisset , and J. M. Franchet , Control of Interfacial Phenomena During Liquid Route Processing of 1D-SiCCVD/Ti Alloy Composites , Proc. of 12th European Conf. on Composite Materials , Biarritz (France), August–September, paper no. 493 (8p) , 2006 .
   Google Scholar
• C. Arvieu , J. P. Manaud , and J. M. Quenisset , Interaction between Titanium and Carbon at Moderate Temperatures , J. of Alloys and Compounds , vol. 368 , pp. 116 – 122 , 2004 .
   Web of Science ®Google Scholar
• S. Sarian , Diffusion of Ti in TiCx , J. Appl. Phys. , vol. 9 , pp. 3515 – 3520 , 1969 .
   Google Scholar
• S. V. Patankar , Numerical Heat Transfer and Fluid Flow , Hemisphere , New York , 1980 .
   Google Scholar
• A. Cantarel , Modélisation de l'imprégnation d'une préforme fibreuse par un alliage en vue de l'élaboration de matériaux composites à matrice métallique, PhD thesis University Bordeaux 1, no. 2806 , 2004 .
   Google Scholar
• A. Cantarel , E. Lacoste , M. Danis , and E. Arquis , Metal Matrix Composites Processing: Numerical Study of Heat Transfer between Fibres and Metal , Int. J. of Num. Methods for Heat and Fluid Flow , vol. 15 , no. 8 , pp. 808 – 826 , 2005 .
   Web of Science ®Google Scholar
• M. Boivineau , C. Cagran , D. Doytier , V. Eyraud , M. H. Nadal , B. Wilthan , and G. Pottlacher , Thermophysical Properties of Solid and Liquid Ti-6Al-4 V (TA6 V) Alloy , Int. J. of Thermophy. , vol. 27 , no. 2 , pp. 507 – 528 , 2006 .
   Web of Science ®Google Scholar
• B. B. Khina , B. Formanek , and O. S. Rabinovitch , Modeling Self-Propagating High-Temperature Synthesis: A Micrometallurgical Approach , 2nd Int. Conf. on Mathematical Modelling and Computer Simulation of Metal Technologies, MMT , pp. 273 – 281 , 2002 .
   Google Scholar