Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 59, 2011 - Issue 2
312
Views
34
CrossRef citations to date
0
Altmetric
Original Articles

A Nonlinear Inverse Problem in Estimating the Heat Generation in Rotary Friction Welding

, &
Pages 130-149 | Received 08 Jul 2010, Accepted 28 Oct 2010, Published online: 28 Jan 2011

REFERENCES

  • M. Maalekian , Friction Welding—Critical Assessment of Literature , Sci. Technol. Weld. Join. , vol. 12 , pp. 708 – 729 , 2007 .
  • V. I. Vill , Friction Welding of Metals , American Welding Society , New York , 1962 . (Translated from Russian.)
  • V. Balasubramanian , Y. Li , T. Stotler , J. Crompton , N. Katsube , and W. Soboyejo , A New Friction Law for the Modelling of Continuous Drive Friction Welding: Applications to 1045 Steel Welds , Mater. Manuf. Process. , vol. 14 , pp. 845 – 860 , 1999 .
  • P. J. Blau , Introduction to the Special Issue on Friction Test Methods for Research and Applications , Tribol. Int. , vol. 34 , pp. 581 – 583 , 2001 .
  • O. M. Alifanov , Inverse Heat Transfer Problem , Springer-Verlag , New York , 1994 .
  • C. H. Huang and K. Y. Chen , An Inverse Phonon Radiative Transport Problem in Estimating the Boundary Temperatures for a Double-Layer Nanoscale Thin-Film , Numer. Heat Transfer A , vol. 52 , pp. 43 – 70 , 2007 .
  • W. L. Chen and Y. C. Yang , On the Inverse Heat Convection Problem of the Flow Over a Cascade of Rectangular Blades , Int. J. Heat Mass Transfer , vol. 51 , pp. 4184 – 4194 , 2008 .
  • W. L. Chen and Y. C. Yang , Estimation of the Transient Heat Transfer Rate at the Boundary of an Electronic Chip Packaging , Numer. Heat Transfer A , vol. 54 , pp. 945 – 961 , 2008 .
  • W. L. Chen , Y. C. Yang , and H. L. Lee , Three-Dimensional Pipe Fouling Layer Estimation by using Conjugate Gradient Inverse Method , Numer. Heat Transfer A , vol. 55 , pp. 845 – 865 , 2009 .
  • C. Le Niliot and F. Lefevre , Multiple Transient Point Heat Sources Identification in Heat Diffusion: Application to Numerical Two- and Three-Dimensional Problems , Numer. Heat Transfer B , vol. 39 , pp. 277 – 301 , 2001 .
  • M. Raudensky , K. A. Woodbury , and J. Kral , Genetic Algorithm in Solution of Inverse Heat Conduction Problems , Numer. Heat Transfer B , vol. 28 , pp. 293 – 306 , 1995 .
  • C. C. Ji and H. Y. Jang , Experimental Investigation in Inverse Heat Conduction Problem , Numer. Heat Transfer A , vol. 34 , pp. 75 – 91 , 1998 .
  • A. J. Silva Neto and M. N. Ozisik , Two-Dimensional Inverse Heat Conduction Problem of Estimating the Time-Varying Strength of a Line Heat Source , J. Appl. Phys. , vol. 71 , pp. 5357 – 5362 , 1992 .
  • C. Le Niliot and F. Lefevre , A Parameter Estimation Approach to Solve the Inverse Problem of Point Heat Sources Identification, Int. J. Heat Mass Transfer , vol. 47, pp. 827–841, 2004.
  • B. Jin and L. Marin , The Method of Fundamental Solutions for Inverse Source Problems Associated with the Steady-State Heat Conduction , Int. J. Numer. Methods Eng. , vol. 69 , pp. 1570 – 1589 , 2007 .
  • H. L. Lee , W. J. Chang , W. L. Chen , and Y. C. Yang , An Inverse Problem of Estimating the Heat Source in Tapered Optical Fibers for Scanning Near-Field Optical Microscopy , Ultramicroscopy , vol. 107 , pp. 656 – 662 , 2007 .
  • W. L. Chen and Y. C. Yang , Inverse Problem of Estimating the Heat Flux at the Roller/Workpiece Interface during a Rolling Process , Appl. Therm. Eng. , vol. 30 , pp. 1247 – 1254 , 2010 .
  • T. C. Nguyen and D. C. Weckman , A Thermal and Microstructure Evolution Model of Direct-Drive Friction Welding of Plain Carbon Steel , Metall. Mater. Trans. B , vol. 37B , pp. 275 – 292 , 2006 .
  • W. L. Chen , Y. C. Yang , and S. S. Chu , Estimation of Heat Generation at the Interface of Cylindrical Bars during Friction Process , Appl. Therm. Eng. , vol. 29 , pp. 351 – 357 , 2009 .
  • O. M. Alifanov and E. A. Artyukhin , Regularized Numerical Solution of Nonlinear Inverse Heat-Conduction Problem , J. Eng. Phys. , vol. 29 , pp. 934 – 938 , 1975 .
  • K. Kahveei , Y. Can , and A. Cihan , Heat Transfer in Continuous-Drive Friction Welding of Different Diameters , Numer. Heat Transfer A , vol. 48 , pp. 1035 – 1050 , 2005 .
  • Y. Can , K. Kahveei , and A. Cihan , Numerical Investigation of Heat Transfer in Friction Welding of Cylindrical Tubes , Heat Transfer Research , vol. 40 , pp. 281 – 291 , 2009 .
  • M. Maalekian , E. Kozeschnik , H. P. Brantner , and H. Cerjak , Comparative Analysis of Heat Generation in Friction Welding of Steel Bars , Acta Materialia , vol. 56 , pp. 2843 – 2855 , 2008 .
  • O. M. Alifanov , Application of the Regularization Principle to the Formulation of Approximate Solution of Inverse Heat Conduction Problem , J. Eng. Phys. , vol. 23 , pp. 1566 – 1571 , 1972 .
  • R. D. Pelhlke , A. Jeyarajan , and H. Wada , Report No. NSF/MAE-82028, NSF Applied Research Division , University of Michigan , 1982 .
  • Y. S. Touloukian , Thermophysical Properties of High Temperature Solid Materials , Macmillan , New York , 1967 .
  • F. S. Lien , W. L. Chen , and M. A. Leschziner , A Multiblock Implementation of a Non-Orthogonal, Collocated Finite Volume Algorithm for Complex Turbulent Flows , Int. J. Numer. Methods Fluids , vol. 23 , pp. 567 – 588 , 1996 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.