Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 60, 2011 - Issue 9
284
Views
22
CrossRef citations to date
0
Altmetric
Original Articles

Design Optimization of a Two-Stage Porous Radiant Burner through Response Surface Modeling

&
Pages 727-745 | Received 08 Apr 2011, Accepted 12 Sep 2011, Published online: 02 Dec 2011

REFERENCES

  • R. Echigo , Y. Yoshizawa , K. Hanamura , and T. Toninura . Analytical, and Experimental Studies on Radiative Propagation in Porous Media with Internal Heat Generation , Proc. 8th Int. Heat Transfer Conf. , San Francisco , CA , pp. 827 – 832 , 1986 .
  • T. W. Tong , W. Q. Lin , and R. E. Peck , Radiative Heat Transfer in Porous Media with Spatially-Dependent Heat Generation , Int. Comm. Heat and Mass Transfer , vol. 14 , pp. 627 – 637 , 1987 .
  • P. F. Hsu , J. R. Howell , and R. D. Matthews , A Numerical Investigation of Premixed Combustion within Porous Inert Media , J. Heat Transfer , vol. 115 , pp. 744 – 750 , 1993 .
  • V. Khanna , R. Goel , and J. L. Ellzey , Measurements of Emissions and Radiation for Methane Combustion within a Porous Medium Burner , Combustion Sci. Tech. , vol. 99 , pp. 133 – 142 , 1994 .
  • M. R. Kulkarni and R. E. Peck , Analysis of a Bilayered Porous Radiant Burner , Numer. Heat Transfer A , vol. 30 , pp. 219 – 232 , 1996 .
  • A. J. Barra , G. Diepvens , J. L. Ellzey , and M. R. Henneke , Numerical Study of the Effects of Material Properties on Flame Stabilization in a Porous Burner , Combustion and Flame , vol. 134 , pp. 369 – 379 , 2003 .
  • L. A. Cantalano , A. Dadone , D. Manodoro , and A. Saponaro , Efficient Design Optimization of Duct-Burners for Combined Cycle and Cogenerative Plants , Eng. Optimization , vol. 38 , pp. 801 – 820 , 2006 .
  • G. Janiga and D. Thévenin , Reducing the CO Emissions in a Laminar Burner using Different Numerical Optimization Methods , J. Power and Energy , vol. 221 , pp. 647 – 655 , 2007 .
  • O. S. Motsamai , J. A. Visser , and R. M. Morris , Multi-Disciplinary Design Optimization of a Combustor , Eng. Optimization , vol. 40 , pp. 137 – 156 , 2008 .
  • M. R. Henneke and J. L. Ellzey , Modeling of Filtration Combustion in a Packed Bed , Combustion and Flame , vol. 117 , pp. 832 – 840 , 1999 .
  • M. D. Smooke , Solution of Burner-Stabilized Premixed Laminar Flames by Boundary Value Methods , J. Computational Phys. , vol. 48 , pp. 72 – 105 , 1982 .
  • J. Hadamard , Lectures on Cauchy's Problem in Linear Partial Differential Equations , Yale University Press , New Haven , CT , 1923 .
  • G. E. P. Box and K. B. Wilson , On the Experimental Attainment of Optimal Conditions , J. Royal Statistical Society B , vol. 13 , pp. 1 – 45 , 1951 .
  • R. H. Myers , D. C. Montgomery , and C. M. Anderson-Cook , Response Surface Methodology: Process and Product Optimization using Designed Experiments, , 3rd ed. John Wiley and Sons , New York , 2009 .
  • P. J. Smith , W. A. Sowa , and P. O. Hedman , Furnace Design using Comprehensive Combustion Models, Combustion and Flame , vol. 79, pp. 111–121, 1990.
  • J. R. Howell , R. Siegel , and M. P. Mengüç , Thermal Radiation Heat Transfer, , 5th ed. , CRC Press , Boca Raton , FL , pp. 640 – 643 , 2011 .
  • L. B. Younis and R. Viskanta , Experimental Determination of the Volumetric Heat Transfer Coefficient between a Stream of Air and Ceramic Foam , IJHMT , vol. 36 , pp. 1425 – 1434 , 1993 .
  • P. F. Hsu and J. R. Howell , Measurement of Thermal Conductivity and Optical Properties of Porous Partially Stabilized Zirconia , Exper. Heat Transfer , vol. 5 , pp. 293 – 313 , 1992 .
  • J. R. Howell , M. J. Hall , and J. L. Ellzey , Combustion of Hydrocarbon Fuels within Porous Inert Media , Progress in Energy and Combustion Science , vol. 22 , pp. 121 – 145 , 1996 .
  • B. Nait-Ali , K. Haberko , H. Vesteghem , J. Absi , and D. S. Smith , Preparation, and Thermal Conductivity Characterization of Highly Porous Ceramics: Comparison between Experimental Results , Analytical Calculations , and Numerical Simulations , J. European Ceramics Society , vol. 27 , pp. 1345 – 1350 , 2007 .
  • A. Krazakov and M. Frenklach , http://www.me.berkeley.edu/drm/, 1994 (accessed 11 August 2010).
  • M. Frenklach , H. Wang , C.-L. Yu , M. Goldenberg , C. T. Bowman , R. K. Hanson , D. F. Davidson , E. F. Chang , G. P. Smith , D. M. Golden , W. C. Gardiner , and V. Lissianski , http://www.me.berkeley.edu/gri_mech/ (accessed 24 March 2010).
  • M. Frenklach , H. Wang , M. Goldenberg , G. P. Smith , D. M. Golden , C. T. Bowman , R. K. Hanson , W. C. Gardiner , and V. Lissianski , GRI-Mech-An Optimized Detailed Chemical Reaction Mechanism for Methane Combustion, Gas Research Institute Topical Report No. GRI-95/0058, Des Plains, IL, 1995.
  • D. G. Goodwin , An Open-Source, Extensible Software Suite for CVD Process Simulation , Proc. CVD XVI and EuroCVD Fourteen , pp. 155 – 162 , 2003 .
  • http://www.cantera.org (accessed 8 July 2010).
  • P. E. Gill , W. Murray , and M. H. Wright , Practical Optimization , Academic Press , San Diego , CA , pp. 221 – 222 , 1986 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.