Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 63, 2013 - Issue 2
148
Views
3
CrossRef citations to date
0
Altmetric
Original Articles

A Fast Numerical Simulation for Modeling Simultaneous Metal Flow and Solidification in Thin Cavities Using the Lubrication Approximation

&
Pages 75-100 | Received 03 Mar 2012, Accepted 06 Aug 2012, Published online: 19 Nov 2012

REFERENCES

  • B. J. Hamrock , Fundamental of Fluid Film Lubrication , McGraw-Hill , New York , 1994 .
  • M. Epstein , F. B. Cheung , Complex Freezing-Melting Interfaces in Fluid Flow , Fluid Mech. , vol. 15 , pp. 293 – 319 , 1983 .
  • B. Weigard , H. Beer , Ice-Formation Phenomena for Water Flow Inside a Cooled Parallel Channel: An Experimental and Theoretical Investigation of Wavy Ice Layers , Int. J. Heat Mass Transfer , vol. 36 , no. 3 , pp. 685 – 693 , 1993 .
  • A. Rouboa and E. Monteiro , Heat Transfer in Multi-Block Grid during Solidification: Performance of Finite Differences and Finite Volume Method, J. Material Processing Tech. , vol. 204, pp. 541–458, 2008.
  • B. Mochnacki , and E. Majchrzak , Numerical Modelling of Casting Solidification using Generalized Finite Difference Method , Material Sci. Forum , vols. 638–642 , pp. 2676 – 2681 , 2010 .
  • X. Yao , M. S. Dargusch , A. K. Dahle , C. J. Davidson , D. H. StJohn , Investigation Into the Effects of Nucleation Parameters on Grain Formation during Solidification using a Cellular Automation–Finite Control Volume Metod , J. Materials Res. , vol. 23 , no. 9 , pp. 2312 – 2325 , 2008 .
  • H. Montazeri , M. Bussmann , and J. Mostaghimi , Accurate Implementation of Forcing Term for Two-Phase Flows into SIMPLE Algorithm , Int. J. Multiphase Flow , vol. 45 , pp. 40 – 52 , 2012 .
  • Z. Domanski , M. Ciesielski , and B. Mochnacki , Application of Control Volume Method using the Voronoi Tessellation in Numerical Modelling of Solidification Process , AIP Conf. Proc. , vol. 1220 , pp. 17 – 26 , 2010 .
  • V. Grozdanic , Finite-Difference Methods for Simulating the Solidification of Castings , Matriali in Tehnologije , vol. 43 , no. 5 , pp. 233 – 237 , 2009 .
  • A. Rouboa and E. Monteiro , Heat Transfer in Multi-Block Grid during Solidification: Performance of Finite Difference and Finite Volume Methods , J. Material Processing Tech. , vol. 204 , no. 1–3 , pp. 451 – 458 , 2008 .
  • C. Yang , and C. Li , Application of SIMPLE Algorithm on Nonstaggered Grid to Numerical Simulation of the Yellow River Flow, and Sediment Transport in Shapotou Reach , ISWREP 2011 — Proc. of 2011 Inte. Symp. on Water Resource and Environmental Protection , vol. 1 , no. 5893085 , pp. 626 – 629 , 2011 .
  • M. Larmaei , T. -F. Mahdi , Analysis of SIMPLE Algorithm for Depth-Averaged Simulations , Environmental Hydraulics Proc. of the 6th Int. Symp. on Environmental Hydraulics , vol. 2 , pp. 967 – 972 , 2010 .
  • A. K. Rastogi , Predictions of Heat and Mass Transfer in Open Channels , J. the Hydraulics Division, ASCE , vol. 104 , no. 3 , pp. 397 – 420 , 1978 .
  • Y. S. Chen and S. M. Kim , Computation of Turbulent Flow using an Extended k − ϵ Turbulence Closure Model , NASA, CR—179204, pp. 21–25, 1987.
  • V. Yakhot , S. A. Orszag , S. Thangam , and T. B. Speziale , Development of Turbulence Models for Shear Flow by a Double Expansion Technique , Phys. Fluids A , vol. 4 , no. 9 , pp. 1510 – 1520 , 1992 .
  • H. S. Hele-Shaw , The Flow of Water , Nature ,vol. 58 , pp. 34 – 38 , 1898 .
  • A. N. Szeri , Tribology: Friction, Lubrication, and Wear , McGraw-Hill , New York , 1980 .
  • K. Venkatesan and R. Shivpuri , Numerical Simulation and Comparison with Water Modeling Studies of the Inertia Dominated Cavity Filling in Die Casting , in S. F. Shen and P. R. Dawson–Balkema , (eds.), Simulation of Materials Processing: Theory, Methods and Applications , Springer , Rotterdam , pp. 1203 – 1211 , 1995
  • V. Aleksenko , V. V. Nakoryakov , and B. G. Pokusaev , Wave Formation on a Vertical Falling Liquid Film , AIChE J , vol. 31 , pp. 1446 – 1458 , 1985 .
  • M. R. Siddique , and R. Khayat , Influence of Inertia and Topography in Thin-Cavity , Physics of fluids , vol. 14 , no. 5 , pp. 1703 – 1719 , 2002 .
  • Ch. Karcher and P.H. Steen , High Reynolds Number Flow in a Narrow Gap Driven by Solidification , Physics of fluids , vol. 13 , no. 4 , pp. 834 – 840 , 2001 .
  • J. K. Carpenter and P. H. Steen , Heat Transfer and Solidification in Planar-Flow Melt-Spinning: High Wheel Speeds , Int. J. Heat Mass Transfer , vol. 40 , no. 9 , pp. 1993 – 2007 , 1997 .
  • Flow Science, FLOW3D®, www.flow3d.com, 2012.
  • S. V. Patankar , Numerical Heat Transfer and Fluid Flow , McGraw-Hill , New York , 1980.
  • D. Kwak and C. C. Kiris , Computation of Viscous Incompressible Flows , Springer , 2011 .
  • A. Reikher , Numerical Analysis of Die-Casting Process in Thin Cavities using Lubrication Approximation, Ph.D. thesis, University of Wisconsin Milwaukee, WI, USA, 2012.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.