Measurement of Film Effectiveness for Cylindrical and Row Trenched Cooling Holes at Different Blowing Ratios

REFERENCES

• D. A. Rowbury , M. L. G. Oldfield , and G. D. Lock , Large-Scale Testing to Validate the Influence of External Cross flow on the Discharge Coefficients of Film Cooling Holes , J. Turbomach. , vol. 123 , pp. 593 – 600 , 2001 .
   Web of Science ®Google Scholar
• D. A. Rowbury , M. L. G. Oldfield , and G. D. Lock , A Method for Correlating the Influence of External Crossflow on the Discharge Coefficients of Film Cooling Holes , J. Turbomach. , vol. 123 , pp. 258 – 265 , 2001 .
   Web of Science ®Google Scholar
• S. Stitzel and K. A. Thole , Flow Field Computations of Combustor-Turbine Interactions Relevant to a Gas Turbine Engine , J. Turbomach. , vol. 126 , pp. 122 – 129 , 2004 .
   Web of Science ®Google Scholar
• J. J. Scrittore , Experimental Study of the Effect of Dilution Jets on Film Cooling Flow in a Gas Turbine Combustor, PhD theses, Virginia Polytechnic Institute and State University, Virginia, pp. 160, 2008.
   Google Scholar
• E. Kianpour , N. A. C. Sidik , and M. Agha Seyyed Mirza Bozorg , Thermodynamic Analysis of Flow Field at the End of Combustor Simulator, in AEROTECH IV Conference, Kuala Lumpur, Malaysia, AMM.225.261, 2012.
   Google Scholar
• E. Kianpour , N. A. C. Sidik , and M. Agha Seyyed Mirza Bozorg , Dynamic Analysis of Flow Field at the End of Combustor Simulator , Jurnal Teknologi , vol. 58 , pp. 5 – 12 , 2012 .
   Google Scholar
• V. Aga and R. S. Abhari , Influence of Flow Structure on Compound Angled Film Cooling Effectiveness, and Heat Transfer , J. Turbomach. , vol. 133 , pp. 031029-1 – 031029-12 , 2011 .
   Google Scholar
• L. I-Chien , C. Yun-Chung , D. Pei-Pei , and C. Ping-Hei , Film Cooling Over a Concave Surface through Two Staggered Rows of Compound Angle Holes , J. Chin. Ins. Eng. , vol. 28 , pp. 827 – 836 , 2005 .
   Web of Science ®Google Scholar
• L. Yiping , A. Dhungel , S. V. Ekkad , and R. S. Bunker , Effect of Trench Width, and Depth on Film Cooling From Cylindrical Holes Embedded in Trenches , J. Turbomach. , vol. 131 , pp. 011003-1 – 011003-13 , 2009 .
   Google Scholar
• J. Maikell , D. Bogard , J. Piggush , and A. Kohli , Experimental Simulation of a Film Cooled Turbine Blade Leading Edge Including Thermal Barrier Coating Effects , J. Turbomach. , vol. 133 , pp. 011014-1 – 011014-7 , 2011 .
   Web of Science ®Google Scholar
• A. Azzi and B. A. Jubran , Influence of Leading-Edge Lateral Injection Angles on the Film Cooling Effectiveness of a Gas Turbine Blade , J. Heat Mass Transfer , vol. 40 , pp. 501 – 508 , 2004 .
   Google Scholar
• A. Rozati and K. Danesh Tafti , Effect of Coolant–Mainstream Blowing Ratio on Leading Edge Film Cooling Flow and Heat Transfer – LES Investigation , J. Heat Fluid Flow , vol. 29 , pp. 857 – 873 , 2008 .
   Web of Science ®Google Scholar
• S. A. Lawson and K. A. Thole , Simulations of Multiphase Particle Deposition on End wall Film-Cooling Holes in Transverse Trenches , J. Turbomach. , vol. 134 , pp. 051040-1 – 051040-10 , 2012 .
   Google Scholar
• K. D. Lee and K. Y. Kim , Film Cooling Performance of Cylindrical Holes Embedded in a Tranverse Trench , Numer. Heat Tr. A – Appl. , vol. 65 , pp. 127 – 143 , 2014 .
   Web of Science ®Google Scholar
• N. Sundaram and K. A. Thole , Bump, and Trench Modifications to Film-Cooling Holes at the Vane-End wall Junction , J. Turbomach. , vol. 130 , pp. 041013-1 – 041013-9 , 2008 .
   Google Scholar
• K. D. Lee , S. M. Kim , and K. Y. Kim , Multi-Objective Optimization of a Row of Film Cooling Holes using an Evolutionary Algorithm and Surrogate Modeling , Numer. Heat Tr. A – Appl. , vol. 63 , pp. 623 – 641 , 2013 .
   Web of Science ®Google Scholar
• L. Cun-liang , Z. Hui-ren , B. Jiang-tao , and X. Du-chun , Film Cooling Performance of Converging Slot-Hole Rows on a Gas Turbine Blade , Int. J. Heat Mass Transfer , vol. 53 , pp. 5232 – 5241 , 2010 .
   Web of Science ®Google Scholar
• L. Cun-liang , Z. Hui-ren , B. Jiang-tao , and X. Du-chun , Film Cooling Performance of Converging-Slot Holes With Different Exit-Entry Area Ratios , J. Turbomach. , vol. 133 , pp. 011020–1 – 011020–11 , 2011 .
   Google Scholar
• R. P. Somawardhana and D. G. Bogard , Effects of Obstructions, and Surface Roughness on Film Cooling Effectiveness With and Without a Transverse Trench , J. Turbomach. , vol. 131 , pp. 011010-1 – 011010-8 , 2009 .
   Google Scholar
• S. S. Vakil and K. A. Thole , Flow and Thermal Field Measurements in a Combustor Simulator Relevant to a Gas Turbine Aero Engine , J. Eng. Gas Turb. Power , vol. 127 , pp. 257 – 267 , 2005 .
   Web of Science ®Google Scholar
• C. Shuping , Film Cooling Enhancement with Surface Restructure, PhD theses, University of Pittsburgh, Pennsylvania, pp. 150, 2009.
   Google Scholar
• H. W. Zhang , Y. L. He , and W. Q. Tao , Numerical Study on Liquid-Film Cooling at High Pressure , Numer. Heat Trans. A , vol. 58 , pp. 163 – 186 , 2010 .
   Web of Science ®Google Scholar
• M. Silieti , E. Divo , and A. J. Kassab , The Effect of Conjugate Transfer on Film Cooling Effectiveness , Numer. Heat Trans. A , vol. 56 , pp. 335 – 350 , 2009 .
   Web of Science ®Google Scholar
• M. J. Ely and B. A. Jubran , A Numerical Study on Improving Large Angle Film Cooling Performance through the Use of Sister Holes, Numer. Heat Trans. A , vol. 55, pp. 634–653, 2009.
   Web of Science ®Google Scholar
• K. D. Lee and K. Y. Kim , Optimization of a Cylindrical Film Cooling Hole Using Surrogate Modeling , Numer. Heat Trans. A , vol. 55 , pp. 362 – 380 , 2009 .
   Web of Science ®Google Scholar
• M. D. Barringer , O. T. Richard , J. P. Walter , S. M. Stitzel , and K. A. Thole , Flow Field Simulations of a Gas Turbine Combustor , J. Turbomach. , vol. 124 , pp. 508 – 516 , 2002 .
   Web of Science ®Google Scholar
• Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/unht.
   Google Scholar