REFERENCES
- J. Campbell , Castings , pp. 129 , Butterworth-Heinemann , London , 1991 .
- R. A. Harding , M. Wickins , H. Wang , G. Djambazov , and K. Pericleous , Development of a Turbulence-Free Casting Technique for Titanium Aluminides , Intermetallic , vol. 19 , no. 6 , pp. 805 – 813 , 2010 .
- D. O'Mahoney and D. J. Browne , Use of Experiment and an Inverse Method to Study Interface Heat Transfer During Solidification in the Investment Casting Process , Exp. Therm. Fluid Sci. , vol. 22 , pp. 111 – 122 , 2000 .
- J. O. Aweda and M. B. Adeyemi , Experimental Determination of Heat Transfer Coefficients During Squeeze Casting of Aluminum , J. Mater. Process. Technol. , vol. 209 , pp. 1477 – 1483 , 2009 .
- C. H. Konrad , M. Brunner , K. Kyrgyzbaev , R. Vokl , and U. Glatzel , Determination of Heat Transfer Coefficient and Ceramic Mold Material Parameters for Alloy IN738LC Investment Castings , J. Mater. Process. Technol. , vol. 211 , pp. 181 – 186 , 2011 .
- S. V. Shepel and S. Paolucci , Numerical Simulation of Filling and Solidification of Permanent Mold Castings , Appl. Therm. Eng. , vol. 22 , pp. 229 – 248 , 2002 .
- H. Wang , G. Djambazov , and K. Pericleous , Numerical Study of Crucial Parameters in Tilt Casting for Titanium Aluminides , China Foundry , vol. 8 , no. 3 , pp. 274 – 281 , 2011 .
- H. Wang , G. Djambazov , and K. Pericleous , Numerical Modelling of the Tilt Casting Process for γ-TiAl Alloys , Int. J. Cast Met. Res. , vol. 25 , no. 2 , pp. 65 – 73 , 2012 .
- I.-T. Im , W.-S. Kim , and K.-S. Lee , A Unified Analysis of Filling and Solidification in Casting with Natural Convection , Int. J. Heat Mass Transfer , vol. 44 , pp. 1507 – 1515 , 2001 .
- J. Y. Zhang , A. S. Usmani , and R. W. Lewis , A Realistic Coupled Thermo-Mechanical Finite Element Model of Casting Systems, Proc. 3rd World Conf. on Computational Mechanics (WCCM III), Chiba, Japan, 1994 .
- R. W. Lewis and R. S. Ransing , The Optimal Design of Interfacial Heat Transfer Coefficients vis a Thermal Stress Model , Finite Elem. Anal. Des. , vol. 34 , pp. 193 – 209 , 2000 .
- R. W. Lewis and R. S. Ransing , A Correlation to Describe Interfacial Heat Transfer During Solidification Simulation and its Use in the Optimal Feeding Design of Castings , Metall. Mater. Trans. B , vol. 29 , no. 2 , pp. 437 – 448 , 1998 .
- R. W. Lewis , R. S. Ransing , and D. T. Gethin , Lewis-Ransing Correlation to Optimally Design the Metal-Mould Heat Transfer , Int. J. Numer. Methods Heat Fluid Flow , vol. 9 , no. 3 , pp. 318 – 332 , 1999 .
- H. Wang , G. Djambazov , and K. Pericleous , Analysis of Heat Transfer through the Casting-Mould Interface Including Gas-Gap Effect and Application to TiAl Castings , Int. J. Numer. Methods Heat Fluid Flow , vol. 23 , no. 4 , pp. 707 – 724 , 2013 .
- R. A. Harding , M. Wickins , H. Wang , G. Djambazov , and K. Pericleous , The Tilt Casting of Titanium Aluminides, LMPC 2007, Proc. 2007 Int. Symp. on Liquid Metal Processing and Casting, Paris, France, SF2M, p. 207e12, 2007 .
- K. Pericleous , K. S. Chan , and M. Cross , Free Surface Flow and Heat Transfer in Cavities: The SEA Algorithm , Numer. Heat Transfer, Part B , vol. 27 , pp. 487 – 507 , 1995 .
- B. Van Leer , Towards the Ultimate Conservation Difference Scheme IV: A New Approach to Numerical Convection, J. Comput. Phys. , vol. 23, pp. 276, 1977.
- D. Agonafer , G. L. Liao , and D. B. Spalding , The LVEL Turbulence Model for Conjugate Heat Transfer at Low Reynolds Numbers. Application of CAE/CAD Electronic Systems , ASME , vol. 18 , pp. 23 – 26 , 1996 .
- V. R. Voller , C. R. Swaininahan , and B. G. Thomas , Fixed Grid Techniques for Phase Change Problems – A Review , Int. J. Numer. Methods Eng. , vol. 30 , pp. 875 – 898 , 1990 .
- PHYSICA, University of Greenwich, London, UK. www.physica.co.uk .