Investigations of film cooling and its nonuniform distribution for the conjugate heat transfer passage with a compound inclined angle jet

References

• E. Benini, Advances in Gas Turbine Technology, InTech, Rijeka, Croatia, 2011.
   Google Scholar
• S. Mhetras, H. Yang, and Z. H. Gao, Film-cooling Effectiveness on Squealer Cavity and Rim Walls of Gas-Turbine Blade Tip, J. Propulsion Power, vol. 22, pp. 889–899, 2006.
   Web of Science ®Google Scholar
• O. Hassan and I. Hassan, Experimental Investigations of the Film Cooling Effectiveness of a Micro-Tangential-Jet Scheme on a Gas Turbine Vane, Int. J. Heat Mass Transfer, vol. 61, pp. 158–171, 2013.
   Web of Science ®Google Scholar
• O. Hassan and I. Hassan, Experimental Investigations of the Film Cooling Heat Transfer Coefficient of a Micro-Tangential-Jet Scheme on a Gas Turbine Vane, Int. J. Heat Mass Transfer, vol. 64, pp. 401–417, 2013.
   Web of Science ®Google Scholar
• X. Li, Y. Qin, J. Ren, and H. Jiang, Algebraic Anisotropic Turbulence Modeling of Compound Angled Film Cooling Validated by Particle Image Velocimetry, and Pressure Sensitive Paint Measurements, ASME J. Heat Transfer, vol. 136, 032201, 2014.
   PubMed Web of Science ®Google Scholar
• Z. H. Gao, D. P. Narzary, and J. C. Han, Film-Cooling on a Gas Turbine Blade Pressure Side or Suction Side with Compound Angle Shaped Holes, ASME J. Turbomachinery, vol. 131, 011019, 2009.
   Web of Science ®Google Scholar
• S. J. Li, S. F. Yang, and J. C. Han, Effect of Coolant Density on Leading Edge Showerhead Film Cooling Using the Pressure Sensitive Paint Measurement Technique, ASME J. Turbomachinery, vol. 136, 051011, 2014.
   Web of Science ®Google Scholar
• C. Yang and J. Zhang, Experimental Investigation on Film Cooling Characteristics from a Row of Holes with Ridge-Shaped Tabs, Exp. Therm. Fluid Sci., vol. 37, pp. 113–120, 2012.
   Web of Science ®Google Scholar
• J. Pu, Z. Ke, J. H. Wang, H. You, and Z. Du, An Experimental Investigation on Fluid Flow Characteristics in a Real Coolant Channel of LP Turbine Blade with PIV Technique, Exp. Therm. Fluid Sci., vol. 45, pp. 43–53, 2013.
   Web of Science ®Google Scholar
• B. Johnson, W. Tian, K. Zhang, and H. Hu, An Experimental Study of Density Ratio Effects on the Film Cooling Injection from Discrete Holes by Using PIV and PSP Techniques, Int. J. Heat Mass Trans., vol. 76, pp. 337–349, 2014.
   Web of Science ®Google Scholar
• S. B. Islami, S. P. A. Tabrizi, and B. A. Jubran, Computational Investigation of Film Cooling from Trenched Holes near the Leading Edge of a Turbine Blade, Numer. Heat Trans. A, vol. 53, pp. 308–322, 2008.
   Web of Science ®Google Scholar
• M. J. Ely and B. A. Jubran, A Numerical Study on Improving Large Angle Film Cooling Performance through the Use of Sister Holes, Numer. Heat Trans. A, vol. 55, pp. 634–653, 2009.
   Web of Science ®Google Scholar
• K. D. Lee and K. Y. Kim, Optimization of a Cylindrical Film Cooling Hole Using Surrogate Modeling, Numer. Heat Trans. A, vol. 55, pp. 362–380, 2009.
   Web of Science ®Google Scholar
• K. D. Lee and K. Y. Kim, Film Cooling Performance of Cylindrical Holes Embedded in a Transverse Trench, Numer. Heat Trans. A, vol. 65, pp. 127–143, 2014.
   Web of Science ®Google Scholar
• K. D. Lee, S. M. Kim, and K. Y. Kim, Multi-Objective Optimization of a Row of Film Cooling Holes Using an Evolutionary Algorithm and Surrogate Modeling, Numer. Heat Trans. A, vol. 63, pp. 623–641, 2013.
   Web of Science ®Google Scholar
• D. L. Schmidt, B. Sen, and D. G. Bogard, Film Cooling with Compound Angle Holes: Adiabatic Effectiveness, ASME J. Turbomachinery, vol. 118, pp. 807–813, 1996.
   Web of Science ®Google Scholar
• D. G. Hyams and J. H. Leylek, A Detailed Analysis of Film Cooling Physics: Part III-Streamwise Injection with Shaped Holes, ASME J. Turbomachinery, vol. 122, pp. 122–132, 2000.
   Web of Science ®Google Scholar
• R. A. Brittingham and J. H. Leylek, A Detailed Analysis of Film Cooling Physics: Part Iv-Compound-Angle Injection with Shaped Holes, ASME J. Turbomachinery, vol. 122, pp. 133–145, 2000.
   Web of Science ®Google Scholar
• R. S. Bunker, A Review of Shaped Hole Turbine Film-Cooling Technology, ASME J. Heat Transfer, vol. 127, pp. 441–453, 2005.
   Web of Science ®Google Scholar
• S. Baheri, S. P. A. Tabrizi, and B. A. Jubran, Film Cooling Effectiveness from Trenched Shaped and Compound Holes, Heat Mass Transfer, vol. 44, pp. 989–998, 2008.
   Web of Science ®Google Scholar
• Y. P. Lu, A. Dhungel, S. V. Ekkad, and R. S. Bunker, Film Cooling Measurements for Cratered Cylindrical Inclined Holes, ASME J. Turbomachinery, vol. 131, 011003, 2009.
   Web of Science ®Google Scholar
• Y. P. Lu, A. Dhungel, S. V. Ekkad, and R. S. Bunker, Effect of Trench Width, and Depth on Film Cooling from Cylindrical Holes Embedded in Trenches, ASME J. Turbomachinery, vol. 131, 011005, 2009.
   Web of Science ®Google Scholar
• Z. Gao, D. P. Narzary, and J. C. Han, Film-Cooling on a Gas Turbine Blade Pressure Side or Suction Side with Compound Angle Shaped Holes, ASME J. Turbomachinery, vol. 131, 011019, 2009.
   Web of Science ®Google Scholar
• B. Sunden, G. Xie, Gas Turbine Blade Tip Heat Transfer and Cooling- a Literature Survey, Heat Transfer Eng., vol. 31, pp. 527–554, 2010.
   Web of Science ®Google Scholar
• N. M. Yusop, A. H. Ali, and M. Z. Abdullah, Computational Prediction into Staggered Film Cooling Holes on Convex Surface of Turbine Blade, Int. Commun. Heat Mass, vol. 39, pp. 1367–1374, 2012.
   Web of Science ®Google Scholar
• N. M. Yusop, A. H. Ali, and M. Z. Abdullah, Computational Study of a New Scheme for a Film-Cooling Hole on Convex Surface of Turbine Blades, Int. Commun. Heat Mass, vol. 43, pp. 90–99, 2013.
   Web of Science ®Google Scholar
• G. Iaccarino, A. Ooi, P. A. Durbin, and M. Behnia, Conjugate Heat Transfer Predictions in Two-Dimensional Ribbed Passages, Int. J. Heat Fluid Flow, vol. 23, pp. 340–345, 2002.
   Web of Science ®Google Scholar
• A. Kassab, E. Divo, J. Heidmann, E. Steinthorsson, and F. Rodriguez, BEM/FVM Conjugate Heat Transfer Analysis of a Three-Dimensional Film Cooled Turbine Blade, Int. J. Numer. Method H., vol. 13, pp. 581–610, 2003.
   Web of Science ®Google Scholar
• K. Kusterer, D. Bohn, T. Sugimoto, and R. Tanaka, Conjugate Heat Transfer Analysis of a Test Configuration for a Film-Cooled Blade, Proc. Int. Gas Turbine Congress, Tokyo, Japan, TS-083, pp. 1–6, 2003.
   Google Scholar
• K. Kusterer, T. Hagedorn, D. Bohn, T. Sugimoto, and R. Tanaka, Improvement of a Film-Cooled Blade by Application of the Conjugate Calculation Technique, ASME J. Turbomachinery, vol. 128, pp. 572–578, 2006.
   Web of Science ®Google Scholar
• M. G. Ghorab, Adiabatic and Conjugate Cooling Effectiveness Analysis of a New Hybrid Scheme, Int. J. Therm. Sci., vol. 50, pp. 965–983, 2011.
   Web of Science ®Google Scholar
• G. Nowak and W. Wroblewski, Optimization of Blade Cooling System with Use of Conjugate Heat Transfer Approach, Int. J. Therm. Sci., vol. 50, pp. 1770–1781, 2011.
   Web of Science ®Google Scholar
• J. Nordström and J. Berg, Conjugate Heat Transfer for the Unsteady Compressible Navier–Stokes Equations Using a Multi-Block Coupling, Comput. Fluids, vol. 72, pp. 20–29, 2013.
   Web of Science ®Google Scholar
• X. C. Lu, P. X. Jiang, H. Sugishita, H. Uechi, and K. Suenaga, Conjugate Heat Transfer Analysis of Film Cooling Flows, J. Therm. Sci., vol. 15, pp. 85–91, 2006.
   Web of Science ®Google Scholar
• M. R. Hajmohammadi, M. Moulod, O. J. Shariatzadeh, and A. Campo, Effects of a Thick Plate on the Excess Temperature of Iso-Heat Flux Heat Sources Cooled by Laminar Forced Convection Flow: Conjugate Analysis, Numer. Heat Trans. A, vol. 66, pp. 205–216, 2014.
   Web of Science ®Google Scholar
• B. E. Launder and D. B. Spalding, Lectures in Mathematical Models of Turbulence, Academic Press, England, 1972.
   Google Scholar
• D. C. Wilcox, Turbulence Modeling for CFD, DCW Industries Inc., USA, 2002.
   Google Scholar
• H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics – The Finite Volume Method, Longman, Harlow, UK, 2007.
   Google Scholar
• R. S. Bunker and J. C. Bailey, Film Cooling Discharge Coefficient Measurements in a Turbulated Passage with Internal Crossflow, ASME J. Turbomachinery, vol. 123, pp. 774–780, 2001.
   Web of Science ®Google Scholar
• H. Wu, J. Wang, Y. Wu, M. Zeng, and Q. W. Wang, Numerical Study of Discharge Coefficient in a Passage with Bleeding Holes & Internal Crossflow, 4th Asian Symposium on Computational Heat Transfer and Fluid Flow, Hong Kong, vol. 1, pp. 212–220, 2013.
   Google Scholar
• D. J. Zhang, Q. W. Wang, M. Zeng, L. Q. Luo, F. Wu, and Z. P. Feng, CFD Optimization of Gas Inlet Configuration for 100 KW Microturbine Recuperator, ASME Turbo Expo, Barcelona, GT2006–90256, 2006.
   Google Scholar