Assessment of six turbulence models for modeling and predicting narrow passage flows, part 1: Impingement jets

References

• R. S. Bunker, Gas Turbine Cooling: Moving from Macro to Micro Cooling, in ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, Paper No. GT 2013–94277. American Society of Mechanical Engineers.
   Google Scholar
• R. S. Bunker, Gas Turbine Heat Transfer: 10 Remaining Hot Gas Path Challenges, J. Turbomach., vol. 129, no. 2, pp. 193–201, 2006.
   Web of Science ®Google Scholar
• R. S. Bunker, Innovative Gas Turbine Cooling Techniques, in R. Amano and B. Sunden (eds.), Thermal Engineering in Power Systems, Wessex Institute Technology Press, Southampton, Great Britain, 2008. ISBN 978-1-84564-062-0.
   Google Scholar
• M. Angioletti, R. M. Di Tommaso, E. Nino, and G. Ruocco, Simultaneous Visualization of Flow Field and Evaluation of Local Heat Transfer by Transitional Impinging Jets, Int. J. Heat Mass Transfer, vol. 46, no. 10, pp. 1703–1713, 2003.
   Web of Science ®Google Scholar
• C. Carcasci, An Experimental Investigation on Air Impinging Jets using Visualisation Methods, Int. J. Thermal Sci., vol. 38, no. 9, pp. 808–818, 1999.
   Google Scholar
• E. Baydar and Y. Ozmen, An Experimental Investigation on Flow Structures of Confined and Unconfined Impinging Air Jets, Heat Mass Transfer, vol. 42, no. 4, pp. 338–346, 2006.
   Web of Science ®Google Scholar
• L. F. G. Geers, Multiple Impinging Jet Arrays: An Experimental Study on Flow and Heat Transfer, Ph.D. thesis, Delft University of Technology, TU Delft, 2004.
   Google Scholar
• K. Jambunathan, E. Lai, M. A. Moss, and B. L. Button, A Review of Heat Transfer Data for Single Circular Jet Impingement, Int. J. Heat Fluid Flow, vol. 13, no. 2, pp. 106–115, 1992.
   Web of Science ®Google Scholar
• M. Goodro, J. Park, P. Ligrani, M. Fox, and H. K. Moon, Effect of Temperature Ratio on Jet Array Impingement Heat Transfer, J. Heat Transfer, vol. 131, no. 1, pp. 012201, 2009.
   Web of Science ®Google Scholar
• J. Lee, Z. Ren, J. Haegele, G. Potts, J. S. Jin, P. Ligrani, and H. K. Moon, Effects of Jet-to-target Plate Distance and Reynolds Number on Jet Array Impingement Heat Transfer, J. Turbomach., vol. 136, no. 5, pp. 051013, 2014.
   Web of Science ®Google Scholar
• S. Fechter, A. Terzis, P. Ott, B. Weigand, J. Von Wolfersdorf, and M. Cochet, Experimental and Numerical Investigation of Narrow Impingement Cooling Channels, Int. J. Heat Mass Transfer, vol. 67, pp. 1208–1219, 2013.
   Web of Science ®Google Scholar
• A. Terzis, G. Wagner, J. von Wolfersdorf, P. Ott, and B. Weigand, Hole Staggering Effect on the Cooling Performance of Narrow Impingement Channels using the Transient Liquid Crystal Technique, J. Heat Transfer, vol. 136, no. 7, pp. 071701, 2014.
   Web of Science ®Google Scholar
• S. Caliskan, S. Baskaya, and T. Calisir, Experimental and Numerical Investigation of Geometry Effects on Multiple Impinging Air Jets, Int. J. Heat Mass Transfer, vol. 75, pp. 685–703, 2014.
   Web of Science ®Google Scholar
• M. K. Isman, E. Pulat, A. B. Etemoglu, and M. Can, Numerical Investigation of Turbulent Impinging Jet Cooling of A Constant Heat Flux Surface, Numer. Heat Transfer, Part A Appl., vol. 53, no. 10, pp. 1109–1132, 2008.
   Web of Science ®Google Scholar
• T. H. Shih, J. Zhu, & J. L. Lumley, A New Reynolds Stress Algebraic Equation Model, Comput. Meth. Appl. Mech. Eng., vol. 125, no. 1, pp. 287–302, 1995.
   Web of Science ®Google Scholar
• H. M. Hofmann, R. Kaiser, M. Kind, and H. Martin, Calculations of Steady and Pulsating Impinging Jets—An Assessment of 13 Widely used Turbulence Models, Numer. Heat Transfer, Part B Fundam., vol. 51, no. 6, pp. 565–583, 2007.
   Web of Science ®Google Scholar
• M. A. R. Sharif and K. K. Mothe, Evaluation of Turbulence Models in the Prediction of Heat Transfer Due to Slot Jet Impingement on Plane and Concave Surfaces, Numer. Heat Transfer, Part B Fundam., vol. 55, no. 4, pp. 273–294, 2009.
   Web of Science ®Google Scholar
• N. Zuckerman and N. Lior, Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling, Adv. Heat Transfer, vol. 39, no. 6, pp. 565–631, 2006.
   Google Scholar
• S. Kubacki and E. Dick, Hybrid RANS/LES of Flow and Heat Transfer in Round Impinging Jets, Int. J. Heat Fluid Flow, vol. 32, no. 3, pp. 631–651, 2011.
   Web of Science ®Google Scholar
• F. R. Menter, Two-equation Eddy-Viscosity Turbulence Models for Engineering Applications, AIAA J., vol. 32, no. 8, pp. 1598–1605, 1994.
   Web of Science ®Google Scholar
• V. Yakhot and S. A. Orszag, Renormalization Group Analysis of Turbulence: I. Basic Theory, J. Sci. Comput., vol. 1, no. 1, pp. 3–51, 1986.
   Google Scholar
• T. H. Shih, W. W. Liou, A. Shabbir, Z. Yang, and J. Zhu, A New k-ϵ Eddy Viscosity Model for High Reynolds Number Turbulent Flows, Comput. Fluids, vol. 24, no. 3, pp. 227–238, 1995.
   Web of Science ®Google Scholar
• S. Wallin and A. V. Johansson, An Explicit Algebraic Reynolds Stress Model for Incompressible and Compressible Turbulent Flows, J. Fluid Mech., vol. 403, pp. 89–132, 2000.
   Web of Science ®Google Scholar
• A. K. Hellsten, New Advanced k-ω Turbulence Model for High-Lift Aerodynamics, AIAA J., vol. 43, no. 9, pp. 1857–1869, 2005.
   Google Scholar
• P. A. Durbin, Near-wall Turbulence Closure Modeling without “Damping Functions”, Theor. Comput. Fluid Dyn., vol. 3, no. 1, pp. 1–13, 1991.
   Google Scholar
• M. Wolfshtein, The Velocity and Temperature Distribution in One-dimensional Flow with Turbulence Augmentation and Pressure Gradient, Int. J. Heat Mass Transfer, vol. 12, no. 3, pp. 301–318, 1969.
   Web of Science ®Google Scholar
• R. Gardon and J. C. Akfirat, Heat Transfer Characteristics of Impinging Two Dimensional Air Jets, J. Heat Transfer, vol. 88, no. 1, pp. 101–107, 1966.
   Web of Science ®Google Scholar
• L. W. Florschuetz, C. R. Truman, and D. E. Metzger, Streamwise Flow and Heat Transfer Distributions for Jet Array Impingement with Crossflow, J. Heat Transfer, vol. 103, no. 2, pp. 337–342, 1981.
   Web of Science ®Google Scholar
• M. K. Chyu and S. C. Siw, Recent Advances of Internal Cooling Techniques for Gas Turbine Airfoils, J. Therm. Sci. Eng. Appl., vol. 5, no. 2, pp. 021008, 2013.
   Web of Science ®Google Scholar
• W. M. Kays, Turbulent Prandtl Number—Where Are We? J. Heat Transfer, vol. 116, no. 2, pp. 284–295, 1994.
   Web of Science ®Google Scholar
• M. Coussirat, J. Van Beeck, M. Mestres, E. Egusguiza, J. M. Buchlin, and X. Escaler, Computational Fluid Dynamics Modeling of Impinging Gas-jet Systems: I. Assessment of Eddy Viscosity Models, J. Fluids Eng., vol. 127, no. 4, pp. 691–703, 2005.
   Web of Science ®Google Scholar
• R. S. Bunker, J. C. Bailey, C. P. Lee, and C. W. Stevens, In-wall Network (Mesh) Cooling Augmentation of Gas Turbine Airfoils, ASME Paper No. GT2004–54260, 2004.
   Google Scholar
• D. Lytle and B. W. Webb, Air Jet Impingement Heat Transfer at Low Nozzle-plate Spacings, Int. J. Heat Mass Transfer, vol. 37, no. 12, pp. 1687–1697, 1994.
   Web of Science ®Google Scholar
• D. W. Colucci and R. Viskanta, Effect of Nozzle Geometry on Local Convective Heat Transfer to a Confined Impinging Air Jet, Exp. Therm Fluid Sci., vol. 13, no. 1, pp. 71–80, 1996.
   Web of Science ®Google Scholar
• T. S. O’Donovan and D. B. Murray, Jet Impingement Heat Transfer–Part I: Mean and Root-mean-square Heat Transfer and Velocity Distributions, Int. J. Heat Mass Transfer, vol. 50, no. 17, pp. 3291–3301, 2007.
   Web of Science ®Google Scholar
• R. J. Goldstein, A. I. Behbahani, and K. K. Heppelmann, Streamwise Distribution of the Recovery Factor and the Local Heat Transfer Coefficient to an Impinging Circular Air Jet, Int. J. Heat Mass Transfer, vol. 29, no. 8, pp. 1227–1235, 1986.
   Web of Science ®Google Scholar
• W. Li, L. Yang, J. Ren, and H. Jiang, Algebraic Anisotropic Eddy Viscosity Model for Separated Flows of Internal Cooling Channels, ASME Paper No. GT2014–25591, 2014.
   Google Scholar
• Y. Chen, F. Arbeiter, and G. Schlindwein, A Comparative Study of Turbulence Models for Conjugate Heat Transfer to Gas Flow in a Heated Mini-channel, Numer. Heat Transfer, Part A Appl., vol. 61, no. 1, pp. 38–60, 2012.
   Web of Science ®Google Scholar
• E. Pulat, M. K. Isman, A. B. Etemoglu, and M. Can, Effect of Turbulence Models and Near-wall Modeling Approaches on Numerical Results in Impingement Heat Transfer, Numer. Heat Transfer, Part A Appl., vol. 60, no. 6, pp. 486–519, 2011.
   Web of Science ®Google Scholar
• L. Zhang and D. Che, Turbulence Models for Fluid Flow and Heat Transfer Between Cross-corrugated Plates, Numer. Heat Transfer, Part A Appl., vol. 60, no. 5, pp. 410–440, 2011.
   Web of Science ®Google Scholar