Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 69, 2016 - Issue 5
345
Views
9
CrossRef citations to date
0
Altmetric
Original Articles

Prediction of film cooling effectiveness over a flat plate from film heating studies

, , , &
Pages 529-544 | Received 03 Mar 2015, Accepted 26 Jun 2015, Published online: 30 Nov 2015

References

  • R. J. Goldstein, Film Cooling, in T. F. Irvine, Jr., and J. P. Hartnett, (eds.), Advances in Heat Transfer, vol. 7, pp. 321–379, Academic Press, New York, 1971.
  • K. Wieghardt, Hot Air Discharge for De-Icing, AAF Translation, No. F-TS-919 RE, 1946.
  • S. Papell and A. M. Trout, Experimental Investigations of Air Film Cooling Applied to an Adiabatic Wall by Means of an Axially Discharging Slot, NASA TN D-9, 1959.
  • W. K. Burns and J. L. Stollery, The Influence of Foreign Gas Injection and Slot Geometry on Film Cooling Effectiveness, Int. J. Heat Mass Transfer, vol. 12, pp. 935–951, 1969.
  • N. W. Foster and D. Lampard, Effects of Density and Velocity Ratio on Discrete Hole Film Cooling, AIAA, vol. 13, pp. 1112–1114, 1975.
  • D. R. Pedersen, E. R. G. Eckert, and R. J. Goldstein, Film Cooling With Large Density Differences Between the Mainstream and the Secondary Fluid Measured by the Heat-Mass Transfer Analogy, ASME J. Heat Transfer, vol. 99, pp. 620–627, 1977.
  • A. J. H. Teekaram, C. J. P. Forth, and T. V Jones, The Use of Foreign Gas to Simulate the Effects of Density Ratios in Film Cooling, ASME J. Turbomach., vol. 111, pp. 57–62, 1989.
  • S. M. Guo, C. C. Lai, T. V. Jones, M. L. G. Oldfield, G. D. Lock, and A. J. Rawlinson, The Application of Thin-Film Technology to Measure Turbine-Vane Heat Transfer, and Effectiveness in a Film-Cooled, Engine-Simulated Environment, Int. J. Heat Fluid Flow, vol. 19, pp. 594–600, 1998.
  • T. V. Jones, Theory for the Use of Foreign Gas in Simulating Film Cooling, Int. J. Heat Fluid Flow, vol. 20, pp. 349–354, 1999.
  • K. Singh, B. Premachandran, and M. R. Ravi, A Numerical Study on 2D Film Cooling of a Flat Surface, Numer. Heat Transfer Part A: Appl., vol. 67, pp. 673–695, 2015.
  • R. J. Goldstein, E. R. G. Eckert, and J. W. Ramsey, Film Cooling With Injection through Holes: Adiabatic Wall Temperatures Downstream of a Circular Hole, J. Eng. Power, vol. 90, pp. 384–393, 1968.
  • J. Mayhew, J. W. Baughn, and A. R. Byerley, The Effect of Freestream Turbulence on Film Cooling Adiabatic Effectiveness, Int. J. Heat Fluid Flow, vol. 24, pp. 669–679, 2003.
  • C. H. N. Yuen and R. F. Martinez-Botas, Film Cooling Characteristics of a Single Round Hole at Various Streamwise Angles in a Crossflow: Part I Effectiveness, Int. J. Heat Mass Transfer, vol. 46, pp. 221–235, 2003.
  • S. S. Papell, Effect on Gaseous Film Cooling Injection through Angled Slots and Normal Holes, NASA TN-D-299, pp. 1–27, 1960.
  • S. R. Turns, Thermal Fluid Science – An Integral Approach, Cambridge University Press, New York, NY, 2006.
  • M. Rokni, A New Low-Reynolds Version of an Explicit Algebraic Stress Model for Turbulent Convective, Numer. Heat Transfer, Part B: Fundam., vol. 37, no. 3, pp. 331–363, 2010, 570.
  • K.-D. Lee and K.-Y. Kim, Film Cooling Performance of Cylindrical Holes Embedded in a Transverse Trench, Heat Transfer Part A: Appl., vol. 65, pp. 127–143, 2014.
  • S. B. Islami, S. P. A. Tabrizi, and B. A. Jubran, Computational Investigation of Film Cooling from Trenched Holes Near the Leading Edge of a Turbine Blade, Numer. Heat Transfer Part A: Appl., vol. 53, pp. 308–322, 2007.
  • S. Khajehhasani and B. A. Jubran, Numerical Assessment of the Film Cooling Through Novel Sister-Shaped Single-Hole Schemes, Numer. Heat Transfer Part A: Appl., vol. 67, pp. 414–435, 2015.
  • Fluent 6.3, User’s Guide, Fluent, Inc., Lebanon, NH, 2006.
  • S. C. Kacker, and J. H. Whitelaw, The Effect of Slot Height, and Slot-Turbulence Intensity on the Effectiveness of the Uniform Density, Two-Dimensional Wall Jet, J. Heat Transfer, vol. 90, pp. 4–10, 1968.
  • C. Saumweber, A. Schulz, and S. Wittig, Free-Stream Turbulence Effects on Film Cooling With Shaped Holes, ASME J. Turbomach., vol. 125, pp. 65–73, 2003.
  • S. V. Patankar, Numerical Heat Transfer and Fluid Flow, Hemisphere, Washington, DC, 1990.
  • S. Sarkar and T. K. Bose, Numerical Simulation of a 2-D Jet-Cross Flow Interaction Related to Film Cooling Applications: Effects of Blowing Rate, Injection Angle and Free-Stream Turbulence, Sadhana, vol. 20, pp. 915–935, 1995.
  • K. O’Malley, Theoretical Aspects of Film Cooling, D.Phil. thesis, University of Oxford, Oxford, 1984.
  • K. S. Chen and J. Y. Hwang, Experimental Study on the Mixing of One-and Dual-Line Heated Jets with a Cold Crossflow in a Confined Channel, AIAA J., vol. 29, pp. 353–360, 1991.
  • R. Jia, B. Sundén, P. Miron, B. Léger, A Numerical and Experimental Investigation of the Slot Film-Cooling Jet With Various Angles, ASME J. Turbomach., vol. 127, pp. 635–645, 2005.
  • P. G. Kassimatis, G. C. Bergeles, T. V Jones, and J. W. Chew, Numerical Investigation of the Aerodynamics of the Near-Slot Film Cooling, Int. J. Numer. Methods Fluids, vol. 32, pp. 97–117, 1996.
  • R. J. Goldstein, R. G. Eckert, and F. Bljrgciraf, Effects of Hole Geometry and Density on Three-Dimensional Film Cooling, Int. J. Heat Mass Transfer, vol. 17, pp. 595–607, 1974.
  • C. J. P. Forth, P. J. Loftus, and T. V. Jones, The Effect of Density Ratio on the Film Cooling of a Flat Plate, AGARD Conf. Proc., vol. 390, pp. 1–12, 1985.
  • B. Johnson, K. Zhang, W. Tian, and H. Hu, An Experimental Study of Film Cooling Effectiveness by Using PIV and PSP Techniques, 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2013, AIAA 2013–0603.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.