Hydrodynamic and thermal performance prediction of functionalized MWNT-based water nanofluids under the laminar flow regime using the adaptive neuro-fuzzy inference system

References

• A. Amiri, M. Shanbedi, G. Ahmadi, H. Eshghi, B. Chew, and S. Kazi, Microwave-Assisted Direct Coupling of Graphene Nanoplatelets with Poly Ethylene Glycol and 4-Phenylazophenol Molecules for Preparing Stable-Colloidal System, Colloids Surf. A, Publish Online, pp. 1–11, 2015.
   Google Scholar
• S. Zeinali Heris, M. Fallahi, M. Shanbedi, and A. Amiri, Heat Transfer Performance of Two-Phase Closed Thermosyphon with Oxidized CNT/water Nanofluids, Heat Mass Transfer, Publish Online, pp. 1–9, 2015.
   Google Scholar
• M. Shanbedi, S. Zeinali Heris, A. Amiri, E. Hosseinipour, H. Eshghi, and S. Kazi, Synthesis of Aspartic Acid-Treated Multi-Walled Carbon Nanotubes Based Water Coolant and Experimental Investigation of Thermal and Hydrodynamic Properties in Circular Tube, Energy Convers. Manage., vol. 105, pp. 1366–1376, 2015.
   Web of Science ®Google Scholar
• A. Amiri, R. Sadri, G. Ahmadi, B. Chew, S. Kazi, M. Shanbedi, and M. S. Alehashem, Synthesis of Polyethylene Glycol-Functionalized Multi-Walled Carbon Nanotubes with a Microwave-Assisted Approach for Improved Heat Dissipation, RSC Adv., vol. 5, pp. 35425–35434, 2015.
   Web of Science ®Google Scholar
• A. Amiri, R. Sadri, M. Shanbedi, G. Ahmadi, B. Chew, S. Kazi, and M. Dahari, Performance Dependence of Thermosyphon on the Functionalization Approaches: An Experimental Study on Thermo-Physical Properties of Graphene Nanoplatelet-Based Water Nanofluids, Energy Convers. Manage., vol. 92, pp. 322–330, 2015.
   Web of Science ®Google Scholar
• A. Amiri, R. Sadri, M. Shanbedi, G. Ahmadi, S. Kazi, B. Chew, and M. N. M. Zubir, Synthesis of Ethylene Glycol-Treated Graphene Nanoplatelets with One-Pot, Microwave-Assisted Functionalization for Use as a High Performance Engine Coolant, Energy Convers. Manage., vol. 101, pp. 767–777, 2015.
   Web of Science ®Google Scholar
• A. Beheshti, M. Shanbedi, and S. Zeinali Heris, Heat Transfer and Rheological Properties of Transformer Oil-Oxidized MWCNT Nanofluid, J. Therm. Anal. Calorim., vol. 118, pp. 1451–1460, 2014.
   Web of Science ®Google Scholar
• A. Amiri, M. Shanbedi, H. Amiri, S. Zeinali Heris, S. Kazi, B. Chew, and H. Eshghi, Pool Boiling Heat Transfer of CNT/Water Nanofluids, Appl. Therm. Eng., vol. 71, pp. 450–459, 2014.
   Web of Science ®Google Scholar
• A. Amiri, G. Ahmadi, M. Shanbedi, M. Savari, S. N. Kazi, B. T. Chew, Microwave-Assisted Synthesis of Highly-Crumpled, Few-Layered Graphene and Nitrogen-Doped Graphene for Use as High-Performance Electrodes in Capacitive Deionization, Sci Rep., vol. 5, 17503, 2015.
   PubMed Web of Science ®Google Scholar
• M. Shanbedi, S. Zeinali Heris, A. Amiri, and M. Baniadam, Improvement in Heat Transfer of a Two-Phased Closed Thermosyphon Using Silver-Decorated MWCNT/Water, J. Dispersion Sci. Technol., vol. 35, pp. 1086–1096, 2014.
   Web of Science ®Google Scholar
• M. Shanbedi, S. Zeinali Heris, M. Baniadam, A. Amiri, and M. Maghrebi, Investigation of Heat-Transfer Characterization of EDA-MWCNT/DI-Water Nanofluid in a Two-Phase Closed Thermosyphon, Ind. Eng. Chem. Res., vol. 51, pp. 1423–1428, 2012.
   Web of Science ®Google Scholar
• M. Shanbedi, S. Zeinali Heris, M. Baniadam, and A. Amiri, The Effect of Multi-Walled Carbon Nanotube/Water Nanofluid on Thermal Performance of a Two-Phase Closed Thermosyphon, Exp. Heat Transfer, vol. 26, pp. 26–40, 2013.
   Web of Science ®Google Scholar
• M. Akhtari, M. Haghshenasfard, and M. R. Talaie, Numerical and Experimental Investigation of Heat Transfer of α-Al2O3/Water Nanofluid in Double Pipe and Shell and Tube Heat Exchangers, Numer. Heat Transfer, Part A: Appl., vol. 63, pp. 941–958, 2013.
   Web of Science ®Google Scholar
• I. M. Shahrul, I. M. Mahbubul, R. Saidur, S. S. Khaleduzzaman, M. F. M. Sabri, and M. M. Rahman, Effectiveness Study of a Shell and Tube Heat Exchanger Operated with Nanofluids at Different Mass Flow Rates, Numer. Heat Transfer, Part A: Appl., vol. 65, pp. 699–713, 2014.
   Web of Science ®Google Scholar
• S. Zeinali Heris, M. N. Esfahany, and G. Etemad, Numerical Investigation of Nanofluid Laminar Convective Heat Transfer through a Circular Tube, Numer. Heat Transfer, Part A: Appl., vol. 52, pp. 1043–1058, 2007.
   Web of Science ®Google Scholar
• M. Shanbedi, S. Zeinali Heris, and A. Maskooki, Experimental Investigation of Stability and Thermophysical Properties of Carbon Nanotubes Suspension in the Presence of Different Surfactants, J. Therm. Anal. Calorim., vol. 120, pp. 1193–1201, 2015.
   Web of Science ®Google Scholar
• M. Shanbedi, A. Amiri, S. Rashidi, S. Zeinali Heris, and M. Baniadam, Thermal Performance Prediction of Two-Phase Closed Thermosyphon Using Adaptive Neuro-Fuzzy Inference System, Heat Transfer Eng., vol. 36, pp. 315–324, 2015.
   Web of Science ®Google Scholar
• M. Shanbedi, S. Zeinali Heris, A. Amiri, S. Adyani, M. Alizadeh, and M. Baniadam, Optimization of the Thermal Efficiency of a Two-Phase Closed Thermosyphon Using Active Learning on the Human Algorithm Interaction, Numer. Heat Transfer, Part A: Appl., vol. 66, pp. 947–962, 2014.
   Web of Science ®Google Scholar
• M. Shanbedi, D. Jafari, A. Amiri, S. Zeinali Heris, and M. Baniadam, Prediction of Temperature Performance of a Two-Phase Closed Thermosyphon Using Artificial Neural Network, Heat Mass Transfer, vol. 49, pp. 65–73, 2013.
   Web of Science ®Google Scholar
• M. Shanbedi, S. Zeinali Heris, A. Maskooki, and H. Eshghi, Statistical Analysis of Laminar Convective Heat Transfer of MWCNT-Deionized Water Nanofluid Using the Response Surface Methodology, Numer. Heat Transfer, Part A: Appl., vol. 68, pp. 454–469, 2015.
   Web of Science ®Google Scholar
• F. Gong, D. V. Papavassiliou, and H. M. Duong, Off-Lattice Monte Carlo Simulation of Heat Transfer through Carbon Nanotube Multiphase Systems Taking into Account Thermal Boundary Resistances, Numer. Heat Transfer, Part A: Appl., vol. 65, pp. 1023–1043, 2014.
   Web of Science ®Google Scholar
• M. T. Nguyen, A. M. Aly, and S.-W. Lee, Natural Convection in a Non-Darcy Porous Cavity Filled with Cu–Water Nanofluid Using the Characteristic-Based Split Procedure in Finite-Element Method, Numer. Heat Transfer, Part A: Appl., vol. 67, pp. 224–247, 2015.
   Web of Science ®Google Scholar
• M. Jafari, M. Farhadi, and K. Sedighi, Heat Transfer Enhancement in a Corrugated Channel Using Oscillating Flow and Nanoparticles: An LBM Approach, Numer. Heat Transfer, Part A: Appl., vol. 65, pp. 601–626, 2014.
   Web of Science ®Google Scholar
• F. Selimefendigil and H. F. Öztop, Estimation of the Mixed Convection Heat Transfer of a Rotating Cylinder in a Vented Cavity Subjected to Nanofluid by Using Generalized Neural Networks, Numer. Heat Transfer, Part A: Appl., vol. 65, pp. 165–185, 2014.
   Web of Science ®Google Scholar
• M. Abolhasani, A. Karami, and M. Rahimi, Numerical Modeling and Optimization of the Enhancement of the Cooling Rate in Concentric Tubes Under Ultrasound Field, Numer. Heat Transfer, Part A: Appl., vol. 67, pp. 1282–1309, 2015.
   Web of Science ®Google Scholar
• R. Beigzadeh, M. Rahimi, M. Parvizi, and S. Eiamsa-ard, Application of ANN and GA for the Prediction and Optimization of Thermal and Flow Characteristics in a Rectangular Channel Fitted with Twisted Tape Vortex Generators, Numer. Heat Transfer, Part A: Appl., vol. 65, pp. 186–199, 2014.
   Web of Science ®Google Scholar
• C. S. N. Azwadi, M. Zeinali, A. Safdari, and A. Kazemi, Adaptive-Network-Based Fuzzy Inference System Analysis to Predict the Temperature and Flow Fields in a Lid-Driven Cavity, Numer. Heat Transfer, Part A: Appl., vol. 63, pp. 906–920, 2013.
   Web of Science ®Google Scholar
• C. L. Allen, A. R. Chhatwal, and J. M. Williams, Direct Amide Formation from Unactivated Carboxylic Acids and Amines, Chem. Commun., vol. 48, pp. 666–668, 2012.
   PubMed Web of Science ®Google Scholar
• J. Fernandez-Seara, F. J. Uhía, J. Sieres, and A. Campo, A General Review of the Wilson Plot Method and Its Modifications to Determine Convection Coefficients in Heat Exchange Devices, Appl. Therm. Eng., vol. 27, pp. 2745–2757, 2007.
   Web of Science ®Google Scholar
• J. D. Holman, Experimental Methods for Engineers, 5th ed., McGrow-Hill, New York, 1989.
   Google Scholar
• M. Balcilar, A. Dalkilic, and S. Wongwises, Artificial Neural Network Techniques for the Determination of Condensation Heat Transfer Characteristics During Downward Annular Flow of R134a Inside a Vertical Smooth Tube, Int. Commun. Heat Mass Transfer, vol. 38, pp. 75–84, 2011.
   Web of Science ®Google Scholar
• M. Mehrabi and S. Pesteei, Modeling of Heat Transfer and Fluid Flow Characteristics of Helicoidal Double-Pipe Heat Exchangers Using Adaptive Neuro-Fuzzy Inference System (ANFIS), Int. Commun. Heat Mass Transfer, vol. 38, pp. 525–532, 2011.
   Web of Science ®Google Scholar
• A. Amiri, M. Maghrebi, M. Baniadam, and S. Zeinali Heris One-pot, Efficient Functionalization of Multi-Walled Carbon Nanotubes with Diamines by Microwave Method, Appl. Surf. Sci., vol. 257, pp. 10261–10266, 2011.
   Web of Science ®Google Scholar
• M. Sveningsson, R.-E. Morjan, O. A. Nerushev, Y. Sato, J. Bäckström, E. E. Campbell, and F. Rohmund, Raman Spectroscopy and Field-Emission Properties of CVD-Grown Carbon-Nanotube Films, Appl. Phys. A, vol. 73, pp. 409–418, 2001.
   Web of Science ®Google Scholar