Parametric study and multiple correlations of an H-type finned tube bank in a fully developed region

References

• C. C. Wang, J. Y. Chang, and N. F. Chiou, Effects of Waffle Height on the Air-side Performance of Wavy Fin-and-Tube Heat Exchangers, Heat Transfer Eng., vol. 20, pp. 45–56, 1999.
   Web of Science ®Google Scholar
• C. C. Wang, W. L. Fu, and C. T. Chang, Heat Transfer and Friction Characteristics of Typical Wavy Fin-and-Tube Heat Exchangers, Exp. Therm. Fluid Sci., vol. 14, pp. 174–186, 1997.
   Web of Science ®Google Scholar
• C. C. Wang, Y. M. Hwang, and Y. T. Lin, Empirical Correlations for Heat Transfer and Flow Friction Characteristics of Herringbone Wavy Fin-and-Tube Heat Exchangers, Int. J. Refrig-Rev. Int. Du Froid, vol. 25, pp. 673–680, 2002.
   Web of Science ®Google Scholar
• C. C. Wang, J. Y. Jang, and N. F. Chiou, A Heat Transfer and Friction Correlation for Wavy Fin-and-Tube Heat Exchangers, Int. J. Heat Mass Transfer, vol. 42, pp. 1919–1924, 1999.
   Web of Science ®Google Scholar
• C. C. Wang, J. S. Liaw, and B. C. Yang, Airside Performance of Herringbone Wavy Fin-and-Tube Heat Exchangers – Data with Larger Diameter Tube, Int. J. Heat Mass Transfer, vol. 54, pp. 1024–1029, 2011.
   Web of Science ®Google Scholar
• C. C. Wang, W. H. Tao, and Y. J. Du, Effect of Waffle Height on the Air-side Performance of Wavy Fin-and-Tube Heat Exchangers Under Dehumidifying Conditions, Heat Transfer Eng., vol. 21, pp. 17–26, 2000.
   Web of Science ®Google Scholar
• M. Abu Madi, R. A. Johns, and M. R. Heikal, Performance Characteristics Correlation for Round Tube and Plate Finned Heat Exchangers, Int. J. Refrig-Rev. Int. Du Froid, vol. 21, pp. 507–517, 1998.
   Web of Science ®Google Scholar
• F. Halici, I. Taymaz, and M. Gunduz, The Effect of the Number of Tube Rows on Heat, Mass and Momentum Transfer in Flat-Plate Finned Tube Heat Exchangers, Energy, vol. 26, pp. 963–972, 2001.
   Web of Science ®Google Scholar
• G. Lozza and U. Merlo, An Experimental Investigation of Heat Transfer and Friction Losses of Interrupted and Wavy Fins for Fin-and-Tube Heat Exchangers, Int. J. Refrig-Rev. Int. Du Froid, vol. 24, pp. 409–416, 2001.
   Web of Science ®Google Scholar
• B. Youn and N. H. Kim, An Experimental Investigation on the Airside Performance of Fin-and-Tube Heat Exchangers Having Sinusoidal Wave Fins, Heat Mass Transfer, vol. 43, pp. 1249–1262, 2007.
   Web of Science ®Google Scholar
• X. Ma, G. Ding, Y. Zhang, and K. Wang, Airside Heat Transfer and Friction Characteristics for Enhanced Fin-and-Tube Heat Exchanger with Hydrophilic Coating under Wet Conditions, Int. J. Refrig-Rev. Int. Du Froid, vol. 30, pp. 1153–1167, 2007.
   Web of Science ®Google Scholar
• L. H. Tang, M. Zeng, and Q. W. Wang, Experimental and Numerical Investigation on Air-side Performance of Fin-and-Tube Heat Exchangers With Various Fin Patterns, Exp. Therm. Fluid Sci., vol. 33, pp. 818–827, 2009.
   Web of Science ®Google Scholar
• M. S. Mon and U. Gross, Numerical Study of Fin-spacing Effects in Annular-finned Tube Heat Exchangers, Int. J. Heat Mass Transfer, vol. 47, pp. 1953–1964, 2004.
   Web of Science ®Google Scholar
• Y. P. Cheng, Z. G. Qu, W. Q. Tao, and Y. L. He, Numerical Design of Efficient Slotted Fin Surface Based on the Field Synergy Principle, Numer. Heat Transfer Part A (Applications), vol. 45, pp. 517–538, 2004.
   Web of Science ®Google Scholar
• Z. G. Qu, W. Q. Tao, and Y. L. He, Three-dimensional Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surface With X-arrangement of Strips, J. Heat Transfer-Trans. Asme, vol. 126, pp. 697–707, 2004.
   Web of Science ®Google Scholar
• Y. L. He, W. Q. Tao, F. Q. Song, and W. Zhang, Three-dimensional Numerical Study of Heat Transfer Characteristics of Plain Plate Fin-and-tube Heat Exchangers from View Point of Field Synergy Principle, Int. J. Heat Fluid Flow, vol. 26, pp. 459–473, 2005.
   Web of Science ®Google Scholar
• J. J. Zhou and W. Q. Tao, Three Dimensional Numerical Simulation and Analysis of the Airside Performance of Slotted Fin Surfaces with Radial Strips, Eng. Comput., vol. 22, pp. 940–957, 2005.
   Web of Science ®Google Scholar
• W. Q. Tao, W. W. Jin, Y. L. He, Z. G. Qu, and C. C. Zhang, Optimum Design of Two-row Slotted Fin Surface with X-shape Strip Arrangement Positioned by “Front Coarse, and Rear Dense” Principle, Part I: Physical/mathematical Models and Numerical Methods, Numer Heat Transfer Part A(Applications), vol. 50, pp. 731–749, 2006.
   Web of Science ®Google Scholar
• W. W. Jin, Y. L. He, Z. G. Qu, C. C. Zhang, and W. Q. Tao, Optimum Design of Two-row Slotted Fin Surface with X-shape Strip Arrangement Positioned By “Front Coarse, and Rear Dense” Principle, part II: Results, and Discussion, Numer. Heat Transfer, Part A (Applications), vol. 50, pp. 751–771, 2006.
   Web of Science ®Google Scholar
• Y. B. Tao, Y. L. He, Z. G. Wu, and W. Q. Tao, Three-dimensional Numerical Study and Field Synergy Principle Analysis of Wavy Fin Heat Exchangers with Elliptic Tubes, Int. J. Heat Fluid Flow, vol. 28, pp. 1531–1544, 2007.
   Web of Science ®Google Scholar
• G. N. Xie, Q. W. Wang, and B. Sunden, Parametric Study and Multiple Correlations on Air-side Heat Transfer and Friction Characteristics of Fin-and-tube Heat Exchangers with Large Number of Large-diameter Tube Rows, Appl. Therm. Eng., vol. 29, pp. 1–16, 2009.
   Web of Science ®Google Scholar
• L. T. Tian, Y. L. He, Y. B. Tao and W. Q. Tao, A Comparative Study on the Air-side Performance of Wavy Fin-and-tube Heat Exchanger with Punched Delta Winglets in Staggered and In-line arrangements, Int. J. Therm. Sci., vol. 48, pp. 1765–1776, 2009.
   Web of Science ®Google Scholar
• Y. Z. Liu, Y. C. Yuan, S. Y. Xu, and W. B. Wu, Experimental Study on the Characteristics of Heat Transfer and Flow Resistance for H-type Finned Tube Banks, J. Univ. Shanghai Sci. Technol., vol. 26, pp. 457–460, 2004.
   Google Scholar
• X. N. Yu, Y. C. Yuan, Y. F. Ma, and H. L. Liu, Experimental Tests and Numerical Simulation on Heat Transfer and Resistance Characteristics of H-type Finned Tube Banks, J. Chin. Soc. Power Eng., vol. 30, pp. 433–438, 2010.
   Google Scholar
• Z. X. Zhang, Y. G. Wang, and Q. X. Zhao, Numerical Simulation and Verification on Heat Transfer Characteristics of H-type Finned Tubes, J. Chin. Soc. Power Eng., vol. 30, pp. 368, 2010.
   Google Scholar
• X. Wu, Y. W. Shang, J. L. Wang, and G. L. Ren, Experimental Research Heat Transfer Characteristics of H-type Finned Tube Bundles, J. Southeast Univ., vol. 43, pp. 88–93, 2013.
   Google Scholar
• Y. Jin, G. H. Tang, Y. L. He, and W. Q. Tao, Parametric Study and Field Synergy Principle Analysis of H-type Finned Tube Bank with Ten Rows, Int. J. Heat Mass Transfer, vol. 60, pp. 241–251, 2013.
   Web of Science ®Google Scholar
• Z. Y. Guo, D. Y. Li, and B. X. Wang, A Novel Concept for Convective Heat Transfer Enhancement, Int. J. Heat Mass Transfer, vol. 41, pp. 2221–2225, 1998.
   Web of Science ®Google Scholar
• S. Shen, W. Liu, and W. Q. Tao, Analysis of Field Synergy on Natural Convective Heat Transfer in Porous Media, Int. Commun. Heat Mass Transfer, vol. 30, pp. 1081–1090, 2003.
   Web of Science ®Google Scholar
• W. Q. Tao, Y. L. He, Z. G. Qu, and Y. P. Cheng, Applications of the Field Synergy Principle in Developing New Type Heat Transfer Enhanced Surfaces, J. Enhanced Heat Transfer, vol. 11, pp. 435–451, 2004.
   Web of Science ®Google Scholar
• Z. Y. Guo, W. Q. Tao, and R. K. Shah, The Field Synergy (coordination) Principle and Its Applications in Enhancing Single Phase Convective Heat Transfer, Int. J. Heat Mass Transfer, vol. 48, pp. 1797–1807, 2005.
   Web of Science ®Google Scholar
• W. Q. Tao, Z. Y. Guo, and B. X. Wang, Field Synergy Principle for Enhancing Convective Heat Transfer-Its Extension and Numerical Verifications, Int. J. Heat Mass Transfer, vol. 45, pp. 3849–3856, 2002.
   Web of Science ®Google Scholar
• J. M. Wu and W. Q. Tao, Investigation on Laminar Convection Heat Transfer in Fin-and-tube Heat Exchanger in Aligned Arrangement with Longitudinal Vortex Generator From the Viewpoint of Field Synergy Principle, Appl. Therm. Eng., vol. 27, pp. 2609–2617, 2007.
   Web of Science ®Google Scholar
• M. Zeng and W. Q. Tao, Numerical Verification of the Field Synergy Principle for Turbulent Flow, J. Enhanced Heat Transfer, vol. 11, pp. 453–459, 2004.
   Web of Science ®Google Scholar
• W. Q. Tao, Y. L. He, Q. W. Wang, Z. G. Qu, and F. Q. Song, A Unified Analysis on Enhancing Single Phase Convective Heat Transfer with Field Synergy Principle, Int. J. Heat Mass Transfer, vol. 45, pp. 4871–4879, 2002.
   Web of Science ®Google Scholar
• V. Yakhot and S. A. Orszag, Renormalization Group Analysis of Turbulence. I. Basic theory, J. Sci. Comput., vol. 1, pp. 3–51, 1986.
   Google Scholar
• W. Q. Tao, Numerical Heat Transfer, 2nd ed., Xi’an Jiaotong University Press, Xi’an, China, 2001.
   Google Scholar
• J. J. Zhou, Research on the Mechanisms of Heat Transfer Enhancement and Saving Energy for Compact Heat Exchanger Surfaces and Its Optimization, Ph.D. thesis, Xi’an Jiaotong Univesity, Xi’an China, 2005.
   Google Scholar
• S. M. Yang and W. Q. Tao, Heat Transfer, 4th ed., Higher Education Press, Beijing, 2006.
   Google Scholar
• Y. A. Cengel and A. J. Ghajar, Heat and Mass Transfer, 4th ed., McGraw-Hill, New York, 2010.
   Google Scholar
• T. L. Berman, A. S. Lacine, F. K. Incropera, and D. P. Dewitt, Introduction to Heat Transfer, 6th ed., Joh Wiley & Sons, Inc., Hoboken, 2011.
   Google Scholar
• Y. L. He and W. Q. Tao, Convective Heat Transfer Enhancement: Mechanisms, Techniques, and Performance Evaluation, Int. Symp. on Convective Heat and Mass Transfer, Turkey, vol. 48, 2014.
   Google Scholar
• J. G. Orme and T. Combs-Orme, Multiple Regression with Discrete Dependent Variables, Oxford University Press, New York, USA, 2009.
   Google Scholar