Numerical simulation and optimization of turbulent fluids in a three-dimensional angled ribbed channel

References

• P. Promvonge, T. Chompookham, S. Kwankaomeng, and C. Thianpong, Enhanced Heat Transfer in a Triangular Ribbed Channel with Longitudinal Vortex Generators, Energy Convers. Manag., vol. 51, no. 6, pp. 1242–1249, 2010.
   Web of Science ®Google Scholar
• P. Promvonge, S. Sripattanapipat, S. Tamna, S. Kwankaomeng, and C. Thianpong, Numerical Investigation of Laminar Heat Transfer in a Square Channel with 45° inclined baffles, Int. Commun. Heat Mass Transfer, vol. 37, no. 2, pp. 170–177, 2010.
   Web of Science ®Google Scholar
• P. Promvonge, S. Sripattanapipat, and S. Kwankaomeng, Laminar Periodic Flow and Heat Transfer in Square Channel with 45° Inline Baffles on Two Opposite, Int. J. Therm. Sci., vol. 49, no. 6, pp. 963–975, 2010.
   Web of Science ®Google Scholar
• J. C. Han, J. S. Park, Developing Heat Transfer in Rectangular Channels with Rib Turbulators, Int. J. Heat Mass Transfer, vol. 31, pp. 183–195, 1988.
   Web of Science ®Google Scholar
• J. C. Han, Heat Transfer and Friction Characteristics in Rectangular Channels with Rib Turbulators, Trans. ASME, J. Heat Transfer, vol. 110, pp. 321–328, 1988.
   Web of Science ®Google Scholar
• J. C. Han, S. Ou, J. S. Park, and C. K. Lei, Augmented Heat Transfer in Rectangular Channels of Narrow Aspect Ratios with Rib Turbulators, Int. J. Heat Mass Transfer, vol. 32, pp. 1619–1630, 1989.
   Web of Science ®Google Scholar
• G. Rau, M. Cakan, D. Moeller, and T. Arts, The Effect of Periodic Ribs on the Local Aerodynamic and Heat Transfer Performance of a Triangular Cooling Channel, Trans. ASME J. Turbomach., vol. 120, pp. 368–375, 1998.
   Web of Science ®Google Scholar
• S. W. Chang, T. M. Liou, and W. C. Juan, Influence of Channel Height on Heat Transfer Augmentation in Rectangular Channels with Two Opposite Rib-Roughened Walls, Int. J. Heat Mass Transfer, vol. 48, pp. 2806–2813, 2005.
   Web of Science ®Google Scholar
• S. Lau, R. McMillin, and J. C. Han, Heat Transfer Characteristics of Turbulent Flow in a Square Channel with Angled Discrete Ribs, Trans. ASME J. Turbomach., vol. 113, pp. 367–374, 1991.
   Web of Science ®Google Scholar
• G. Tanda, Heat Transfer in Rectangular Channels with Transverse and V-Shaped Broken Ribs, Int. J. Heat Mass Transfer, vol. 47, pp. 229–243, 2004.
   Web of Science ®Google Scholar
• Y. Zhang, W. Gu, and J. C. Han, Heat Transfer and Friction in Rectangular Channels with Ribbed or Ribbed-Grooved Walls, Trans. ASME J. Heat Transfer, vol. 116, pp. 58–65, 1994.
   Web of Science ®Google Scholar
• E. Y. Choi, Y. D. Choi, W. S. Lee, J. T. Chung, and J. S. Kwak, Heat Transfer Augmentation Using a Rib–Dimple Compound Cooling Technique, Appl. Therm. Eng., vol. 51, pp. 435–441, 2013.
   Web of Science ®Google Scholar
• J. C. Corman, Gas Turbine Combined Cycle Technology and Development Status, in: Proceeding of the International Gas Turbine and Aeroengine Congress & Exhibition, ASME Turbo Expo 96, Birmingham, UK, Paper No. 96-GT-11, 1996.
   Google Scholar
• H. Nomoto, A. Koga, S. Ito, Y. Fukuyama, F. Otomo, S. Shibuya, M. Sato, Y. Kobayashi, and H. Matsuzaki, The Advanced Cooling Technology for the 1500°C Class Gas Turbines: Steam-Cooled Vanes and Air-Cooled Blades, Trans. ASME J. Eng. Gas Turbines Power, vol. 119, pp. 624–632, 1997.
   Web of Science ®Google Scholar
• U. Kruger, K. Kusterer, G. Lang, H. Rosch, D. Bohn, and E. Martens, Analysis of the Influence of Coolant Steam Conditions on the Cooling Efficiency of a Steam Cooled Vane Using the Conjugate Calculation Technique, in: Proceedings of ASME Turbo Expo 2001, New Orleans, Louisiana, USA, Paper no. 2001-GT-0166, 2001.
   Google Scholar
• D. Bohn, A. Wolff, M. Wolff, and K. Kusterer, Experimental and Numerical Investigation of a Steam-Cooled Vane, in: Proceedings of ASME Turbo Expo (2002), Amsterdam, The Netherlands, Paper no. 2002-GT-30210.
   Google Scholar
• B. Facchini, G. Ferrara, and L. Innocenti, Blade Cooling Improvement for Heavy Duty Gas Turbine: the Air Coolant Temperature Reduction and the Introduction of Steam and Mixed Steam/Air Cooling, Int. J. Therm. Sci., vol. 39, pp. 74–84, 2000.
   Web of Science ®Google Scholar
• Y. S. H. Najjar, A. S. Alghamdi, and M. H. Al-Beirutty, Comparative Performance of Combined Gas Turbine Systems under Three Different Blade Cooling Schemes, Appl. Therm. Eng., vol. 24, pp. 1919–1934, 2004.
   Web of Science ®Google Scholar
• Onkar Singh, and B. N. Prasad, Influence of Different Means of Turbine Blade Cooling on the Thermodynamic Performance of Combined Cycle, Appl. Therm. Eng., vol. 28, pp. 2315–2326, 2008.
   Web of Science ®Google Scholar
• L. Q. Shui, J. M. Gao, L. Xu, and X. J. Wang, Numerical Investigation of Heat Transfer and Flow Characteristics in a Steam-Cooled Square Ribbed Duct, in: Proceedings of ASME Turbo Expo 2010, Glasgow, UK, Paper no. 2010-GT-22407.
   Google Scholar
• J. Z. Liu, J. M. Gao, and T. Y. Gao, Forced Convection Heat Transfer of Steam in a Square Ribbed Channel, J. Mech. Sci. Technol., vol. 26, pp. 1291–1298, 2012.
   Web of Science ®Google Scholar
• Y. Zhang and D. Che, Numerical Simulation of Turbulent Flow and Wall Mass Transfer in a Rectangular Channel Roughened by V-shaped Grooves, Numer. Heat Transfer, Part A, vol. 66, no.5, pp. 551–581, 2014.
   Web of Science ®Google Scholar
• G. K. Filonenko, Hydraulic Resistance in Pipes, Teploenergetika I, no. 4, pp. 40–44.
   Google Scholar
• L. Shui, J. Gao, X. Shi, and J. Liu, Effect of Duct Aspect Ratio on Heat Transfer, and Friction in Steam-Cooled Ducts with 60° Angled Rib Turbulators, Exper. Therm. Fluid Sci., vol. 49, pp. 123–134, 2013.
   Web of Science ®Google Scholar
• G. E. P. Box and N. R. Draper, Empirical Model-Building and Response Surface, John Wiley and Sons, Inc., New York, USA, 1987.
   Google Scholar
• MATLAB User Manual, Version 6.5 Release 13, The MathWorks, Inc., 2002.
   Google Scholar