Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 70, 2016 - Issue 6
330
Views
16
CrossRef citations to date
0
Altmetric
Original Articles

Effects of deposition height and width on film cooling

, , &
Pages 673-687 | Received 10 Jan 2016, Accepted 20 Apr 2016, Published online: 18 Aug 2016

References

  • B. Sunden and G. N. Xie, Gas Turbine Blade Tip Heat Transfer and Cooling: A Literature Survey, Heat Transfer Eng., vol. 31, pp. 527–554, 2010.
  • G. N. Xie, S. F. Zheng, and B. Sunden, Heat Transfer and Flow Characteristics in Rib-/Deflector-Roughened Cooling Channels with Various Configuration Parameters, Numer. Heat Transfer A, vol. 67, pp. 140–196, 2015.
  • S. F. Zheng, T. W. Ji, G. N. Xie, and B. Sunden, On the Improvement of the Poor Heat Transfer Lee-Side Regions of Square Cross-Section Ribbed Channels, Numer. Heat Transfer A, vol. 66, pp. 963–989, 2014.
  • Z. R. Hao and C. W. Gu, Numerical Modeling for Gaseous Cavitation of Oil Film and Non-Equilibrium Dissolution Effects in Thrust Bearings, Tribol. Int., vol. 78, pp. 14–26, 2014.
  • Z. R. Hao, C. W. Gu, and X. D. Ren, The Application of Discontinuous Galerkin Methods in Conjugate Heat Transfer Simulations of Gas Turbines, Energies, vol. 7, pp. 7857–7877, 2014.
  • Z. R. Hao, C. W. Gu, and Y. Song, Discontinuous Galerkin Finite Element Methods for Numerical Simulations of Thermoelasticity, J. Thermal Stresses, vol. 38, pp. 983–1004, 2015.
  • S. B. Islami, S. P. A. Tabrizi, and B. A. Jubran, Computational Investigation of Film Cooling from Trenched Holes Near the Leading Edge of a Turbine Blade, Numer. Heat Transfer A, vol. 53, pp. 308–322, 2008.
  • M. J. Ely, B. A. Jubran, A Numerical Study on Improving Large Angle Film Cooling Performance through the Use of Sister Holes, Numer. Heat Transfer A, vol. 55, pp. 634–653, 2009.
  • K. D. Lee and K. Y. Kim, Optimization of a Cylindrical Film Cooling Hole Using Surrogate Modeling, Numer. Heat Transfer A, vol. 55, pp. 362–380, 2009.
  • K. D. Lee and K. Y. Kim, Film Cooling Performance of Cylindrical Holes Embedded in a Transverse Trench, Numer. Heat Transfer A, vol. 65, pp. 127–143, 2014.
  • K. D. Lee, S. M. Kim, and K. Y. Kim, Multi-Objective Optimization of a Row of Film Cooling Holes Using an Evolutionary Algorithm and Surrogate Modeling, Numer. Heat Transfer A, vol. 63, pp. 623–641, 2013.
  • F. H. Asghar and M. J. Hyder, Computational Study of Film Cooling From Single and Two Staggered Rows of Novel Semi-Circular Cooling Holes Including Coolant Plenum, Energy Convers. Manage., vol. 52, pp. 329–334, 2011.
  • S. Bayraktar and T. Yilmaz, Three-dimensional Analysis of Temperature Field for Various Parameters Affect the Film Cooling Effectiveness, Energy Convers. Manage., vol. 52, pp. 1914–1929, 2011.
  • S. R. Shine, S. S. Kumar, and B. N. Suresh, Internal Wall-Jet Film Cooling with Compound Angle Cylindrical Holes, Energy Convers. Manage., vol. 68, pp. 54–62, 2013.
  • S. V. Ekkad and J. C. Han, Film Cooling Measurements on Cylindrical Models With Simulated Thermal Barrier Coating Spallation, J. Thermophys. Heat Transfer, vol. 14, pp. 194–200, 2000.
  • D. E. Bohn and R. Krewinkel, Influence of a Broken-Away TBC on the Flow Structure and Wall Temperature of an Effusion Cooled Multi-Layer Plate Using the Conjugate Calculation Method, Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea and Air, Berlin, Germany, vol. 4, pp. 351–362, 2008.
  • D. E. Bohn and R. Krewinkel, Conjugate Simulation of the Effects of Oxide Formation in Effusion Cooling Holes on Cooling Effectiveness, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air, Orlando, United States, vol. 3, pp. 1335–1343, 2009.
  • N. Sundaram, and K. A. Thole, Effects of Surface Deposition, Hole Blockage, and Thermal Barrier Coating Spallation on Vane Endwall Film Cooling, ASME J. Turbomach., vol. 129, pp. 599–607, 2007.
  • W. Ai, N. Murray, T. H. Fletcher, S. Harding, S. Lewis, and J. P. Bons, Deposition Near Film Cooling Holes on a High Pressure Turbine Vane, ASME J. Turbomach., vol. 134, 041013, 2012.
  • W. Ai, N. Murray, T. H. Fletcher, S. Harding, and J. P. Bons, Effect of Hole Spacing on Deposition of Fine Coal Flyash Near Film Cooling Holes, ASME J. Turbomach., vol. 134, 041021, 2012.
  • D. A. Kistenmacher, F. T. Davidson, and D. G. Bogard, Realistic Trench Film Cooling with a Thermal Barrier Coating and Deposition, ASME J. Turbomach., vol. 136, 091002, 2014.
  • Y. Song, X. Zhuan, T. J. Wang, and X. Chen, Evolution of Thermal Stress in a Coating/Substrate System during the Cooling Process of Fabrication, Mech. Mater., vol. 74, pp. 26–40, 2014.
  • B. E. Launder and D. B. Spalding, Lectures in Mathematical Models of Turbulence, Academic Press, England, 1972.
  • D. C. Wilcox, Turbulence Modeling for CFD, DCW Industries Inc., USA, 2002.
  • H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics: The Finite Volume Method, Longman, UK, 2007.
  • X. C. Li and T. Wang, Simulation of Film Cooling Enhancement with Mist Injection, ASME J. Heat Transfer, vol. 128, pp. 509–519, 2006.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.