Macrosegregation modeling during direct-chill casting of aluminum alloy 7050

References

• J. F. Grandfield, D. G. Eskin, and I. F. Bainbridge, Direct-Chill Casting of Light Alloys, 1st ed., John Wiley & Sons, Inc., Hoboken, New Jersey, 2013.
   Google Scholar
• J. A. Dantzig and M. Rappaz, Solidification, EPFL Press, Boca Raton, Fl., 2009.
   Google Scholar
• D. G. Eskin, J. Zuidema, V. I. Savran, and L. Katgerman, Structure Formation and Macrosegregation Under Different Process Conditions During DC Casting. Mater. Sci. Eng., vol. 384A, pp. 232–244, 2004.
   Google Scholar
• A. V. Reddy, and C. Beckermann, Modeling of Macrosegregation Due to Thermosolutal Convection and Contraction-Driven Flow in Direct Chill Continuous Casting of an al-cu Round Ingot. Metall. Mater. Trans., vol. 28B, pp. 479–489, 1997.
   Web of Science ®Google Scholar
• C. J. Vreeman, M. J. M. Krane, and F. P. Incropera, The Effect of Free-Floating Dendrites and Convection on Macrosegregation in Direct Chill Cast Aluminum Alloys Part I: Model Development. Int. J. Heat Mass Transfer, vol. 43, pp. 677–686, 2000.
   Web of Science ®Google Scholar
• C. J. Vreeman, and F. P. Incropera, The Effect of Free-Floating Dendrites and Convection on Macrosegregation in Direct Chill Cast Aluminum Alloys Part II: Predictions for Al ± Cu and Al ± Mg Alloys. Int. J. Heat Mass Transfer, vol. 43, pp. 687–704, 2000.
   Web of Science ®Google Scholar
• C. J. Vreeman, J. D. Schloz, and M. J. M. Krane, Direct Chill Casting of Aluminum Alloys: Modeling and Experiments on Industrial Scale Ingots. J. Heat Transfer, vol. 124, pp. 947–953, 2002.
   Web of Science ®Google Scholar
• D. G. Eskin, Mechanisms and Control of Macrosegregation in DC Casting. TMS Annual Meeting and Exhibition Light Metals, pp. 855–860, 2014.
   Google Scholar
• D. G. Eskin, Q. Du, and L. Katgerman, Relationship Between Shrinkage-Induced Macrosegregation and the Sump Profile Upon Direct-Chill Casting. Scripta Materialia, vol. 55, pp. 715–718, 2006.
   Web of Science ®Google Scholar
• Q. Du, D. G. Eskin, and L. Katgerman, Modeling Macrosegregation During Direct-Chill Casting of Multicomponent Aluminum Alloys. Metall. Mater. Trans., vol. 38A, pp. 180–189, 2007.
   Web of Science ®Google Scholar
• D. G. Eskin, Q. Du, and L. Katgerman, Scale Rules for Macrosegregation During Direct-Chill Casting of Aluminum Alloys. Metall. Mater. Trans., vol. 39A, pp. 1206–1212, 2008.
   Web of Science ®Google Scholar
• D. G. Eskin, and L. Katgerman, Macrosegregation Mechanisms in Direct-Chill Casting of Aluminium Alloys. Mater. Sci. Forum, vol. 630, pp. 193–199, 2009.
   Google Scholar
• C. J. Vreeman, and F. P. Incropera, Numerical Discretization of Species Equation Source Terms in Binary Mixture Models of Solidification and Their Impact on Macrosegregation in Semicontinuous, Direct Chill Casting Systems. Numer. Heat Transfer, vol. 36B, pp. 1–14, 1999.
   Google Scholar
• Q. Du, D. G. Eskin, and L. Katgerman, The Effect of Ramping Casting Speed and Casting Temperature on Temperature Distribution and Melt Flow Patterns in the Sump of a DC Cast Billet. Mater. Sci. Eng., vol. 413–414A, pp. 144–150, 2005.
   Google Scholar
• D. G. Eskin, V. I. Savran, and L. Katgerman, Effects of Melt Temperature and Casting Speed on the Structure and Defect Formation During Direct-Chill Casting of an Al-Cu Alloy. Metall. Mater. Transfer, vol. 36A, pp. 1965–1976, 2005.
   Web of Science ®Google Scholar
• R. Nadella, D. G. Eskin, Q. Du, and L. Katgerman, Macrosegregation in Direct-Chill Casting of Aluminium Alloys. Prog. Mater. Sci., vol. 53, pp. 421–480, 2008.
   Web of Science ®Google Scholar
• C. Flood, and P. A. Davidson, Natural Convection in Aluminium Direct Chill Cast Ingot. Mater. Sci. Technol., vol. 10, pp. 741–751, 1994.
   Web of Science ®Google Scholar
• M. Reza Aboutalebi, M. Hasan, and R. I. L. Guthrie, Numerical Study of Coupled Turbulent Flow and Solidification for Steel Slab Casters. Numer. Heat Transfer, vol. 28A, pp. 279–297, 1995.
   Web of Science ®Google Scholar
• L. Begum, and M. Hasan, A Numerical Study of 3D Turbulent Melt Flow and Solidification in a Direct Chill Slab Caster with an Open-Top Melt Feeding System. Numer. Heat Transfer, vol. 67A, pp. 719–745, 2014.
   Google Scholar
• L. Begum, and M. Hasan, A Numerical Study of 3D Turbulent Melt Flow and Solidification in a Direct Chill Slab Caster with a Porous Combo Bag Melt Distributor. Numer. Heat Transfer, vol. 67A, pp. 746–770, 2014.
   Google Scholar
• A. J. Williams, T. N. Croft, and M. Cross, Modeling of Ingot Development During the Start-up Phase of Direct Chill Casting. Metall. Mater. Trans., vol. 34B, pp. 727–734, 2003.
   Google Scholar
• D. V. Zagrebelnyy, Modeling Macrosegregation During the Vacuum Arc Remelting of Ti-10 V-2Fe-3Al Alloy, Ph.D. thesis, Purdue University, West Lafayette, Indiana, 2007.
   Google Scholar
• J. Sengupta, S. L. Cockcroft, D. M. Maijer, M. A. Wells, and A. Larouche, On the Development of a Three-Dimensional Transient Thermal Model to Predict Ingot Cooling Behavior During the Start-Up Phase of the Direct Chill-Casting Process for an AA5182 Aluminum Alloy Ingot. Metall. Mater. Trans., vol. 35B, pp. 523–540, 2003.
   Google Scholar
• W. H. Kool, and L. Katgerman, Finite Element Method Simulation of Mushy Zone Behavior During Direct-Chill Casting of an Al-4. 5 Pct Cu Alloy. Metall. Mater. Trans., vol. 35A, pp. 2917–2926, 2004.
   Google Scholar
• H. Hao, D. M. Maijer, M. A. Wells, S. L. Cockcroft, D. Sediako, and S. Hibbins, Development and Validation of a Thermal Model of the Direct Chill Casting of AZ31 Magnesium Billets. Metall. Mater. Transactions, vol. 35A, pp. 3843–3854, 2004.
   Web of Science ®Google Scholar
• M. Lalpoor, D. G. Eskin, and L. Katgerman, Cold Cracking Development in AA7050 Direct Chill–Cast Billets Under Various Casting Conditions. Metall. Mater. Trans., vol. 41A, pp. 2425–2434, 2010.
   Google Scholar
• S. Li, and D. Apelian, Hot Tearing of Aluminum Alloys a Critical Literature Review. Am. Foundry Soc., vol. 5, pp. 23–40, 2011.
   Google Scholar
• W. I. Pumphrey, and J. V. Lyons, Cracking During the Casting and Welding of the More Common Binary Aluminum Alloys. J. Inst. Metals, vol. 74, pp. 439–455, 1948.
   Google Scholar
• R. A. Rosenberg, M. C. Flemings, and H. F. Taylor, Nonferrous Binary Alloys Hot Tearing. Trans. Am. Foundrymen’s Society, vol. 68, pp. 518–528, 1960.
   Google Scholar
• J. Campbell, Castings, 1st ed., Butterworth-Heinemann, Oxford, 1991.
   Google Scholar
• G. Upadhya, S. Cheng, and U. Chandra, A Mathematical Model for Prediction of Hot Tears in Castings. TMS Annual Meeting and Exhibition Light Metals, pp. 1101–1106, 1995.
   Google Scholar
• W. D. Bennon, and F. P. Incropera, Numerical Analysis of Binary Solid-Liquid Phase Change Using a Continuum Model. Numer. Heat Transfer, vol. 13, pp. 277–296, 1988.
   Web of Science ®Google Scholar
• S. V. Patankar, Numerical Heat Transfer and Fluid Flow. Hemisphere Publishing, Washington DC, 1980.
   Google Scholar
• I. Vusanovic, and M. J. M. Krane, Macrosegregation in Horizontal Direct Chill Casting of Ternary Al Alloys: Investigation of Solid Motion. 3rd Int. Conf. Adv. Solidif. Process, vol. 27, p. 012069, 2011.
   Google Scholar
• M. J. M. Krane, Modeling of Transport Phenomena during Solidification Processes. ASM Handbook, vol. 22B, pp. 157–167, 2010.
   Google Scholar
• V. R. Voller, and C. R. Swaminathan, General Source-Based Method for Solidification Phase Change. Numer. Heat Transfer, vol. 19B, pp. 175–189, 1991.
   Web of Science ®Google Scholar
• Specification for Aluminum, and Aluminum Alloy Die Forgings, Hand Forgings, and Rolled Forgings, ASTM International, West Conshohocken, PA, 2009.
   Google Scholar
• J. Yanke, K. Fezi, R. W. Trice, and M. J. M. Krane, Simulation of Slag Skin Formation in Electroslag Remelting Using a Volume-of-Fluid Method. Numer. Heat Transfer, vol. 67A, pp. 268–292, 2015.
   Web of Science ®Google Scholar
• M. Raessi, J. Mostaghimi, and M. Bussmann, A Volume-of-Fluid Interfacial Flow Solver with Advected Normals. Comput. Fluids, vol. 39, pp. 1401–1410, 2010.
   Web of Science ®Google Scholar
• M. Rudman, A Volume-Tracking Method for Incompressible Multifluid Flows with Large Density Variations. Int. J. Numer. Methods Fluids, vol. 28, pp. 357–378, 1998.
   Web of Science ®Google Scholar
• M. Malik, E. Fan, and M. Bussmann, Adaptive VOF with Curvature-Based Refinement. Int. J. Numer. Methods Fluids, vol. 55, pp. 693–712, 2007.
   Web of Science ®Google Scholar
• M. S. Kim, and W. I. Lee, A New VOF-Based Numerical Scheme for the Simulation of Fluid Flow with Free Surface. Part I: New Free Surface-Tracking Algorithm and Its Verification. Int. J. Numer. Methods Fluids, vol. 42, pp. 765–790, 2003.
   Web of Science ®Google Scholar
• S. H. Garrioch, A Volume Tracking Method for the Simulation of Two-Fluid Flows, Ph.D. thesis, Mcgill University, Montreal, 2000.
   Google Scholar
• S. Zhang, J. Yanke, D. R. Johnson, and M. J. M. Krane, Modeling Defects in Castings Using a Volume of Fluid Method. Int. J. Numer. Methods Heat Fluid Flow, vol. 24, pp. 468–482, 2014.
   Web of Science ®Google Scholar
• J. Coleman, K. Fezi, and M. J. M. Krane, Effect of Liquid Metal Distribution On the Flow Field and Macrosegregation During Direct Chill Casting of Aluminum Alloy 7050, in Light Metals, TMS, pp. 641–646, 2016.
   Google Scholar
• J. F. Grandfield, and P. T. McGlade, DC Casting of Aluminum-Process Behavior and Technology. Mater. Forum, vol. 20, pp. 29–51, 1996.
   Google Scholar
• F. P. Incropera, D. P. DeWitt, L. Bergman, and A. S. Lavine, Fundamentals of Heat and Mass Transfer, 7th ed., Hoboken, New Jersey, 2007.
   Google Scholar
• D. C. Weckman, and P. Niessan, A Numerical Simulation of the D. C. Continuous Casting Process Including Nucleate Boiling Heat Transfer. Metall. Mater. Transactions, vol. 13B, pp. 593–602, 1982.
   Web of Science ®Google Scholar
• P. J. Prescott, Convective Transport Phenomena During Solidification of Binary Metal Alloys and the Effects of Magnetic Fields, Ph.D. thesis, Purdue University, West Lafayette, Indiana, 1992.
   Google Scholar
• M. C. Schneider, and C. Beckermann, Formation of Macrosegregation by Multicomponent Thermosolutal Convection During the Solidification of Steel. Metall. Mater. Trans., vol. 26A, pp. 2373–2388, 1995.
   Web of Science ®Google Scholar
• K. Fezi, J. Yanke, and M. J. M. Krane, Macrosegregation During Electroslag Remelting of Alloy 625. Metall. Mater. Trans., vol. 46B, pp. 766–779, 2015.
   Google Scholar
• K. Fezi, A. Plotkowski, and M. J. M. Krane, A Metric for the Quantification of Macrosegregation During Alloy Solidification. Metall. Mater. Trans., vol. 47A, pp. 2940–2951, 2016.
   Google Scholar
• V. R. Voller, and I. Vušanović, Frequency Analysis of Macrosegregation Measurements and Simulations. Int. J. Heat Mass Transfer, vol. 79, pp. 468–471, 2014.
   Web of Science ®Google Scholar
• M. Založnik, and B. Šarler, Modeling of Macrosegregation in Direct-Chill Casting of Aluminum Alloys: Estimating the Influence of Casting Parameters. Mater. Sci. Eng., vol. 413–414A, pp. 85–91, 2005.
   Google Scholar
• M. Lalpoor, D. G. Eskin, D. Ruvalcaba, H. G. Fjær, A. Ten Cate, N. Ontijt et al., Cold Cracking in DC-Cast High Strength Aluminum Alloy Ingots: An Intrinsic Problem Intensified by Casting Process Parameters. Mater. Sci. Eng., vol. 528A, pp. 2831–2842, 2011.
   Google Scholar
• W. F. Gale, Smithells Metals Reference Book. 8th ed., Elsevier, 2004.
   Google Scholar
• C. J. Vreeman, Modeling Macrosegregation in Direct Chill Cast Aluminum Alloys, M.S. thesis, Purdue University, West Lafayette, Indiana, 1997.
   Google Scholar
• T. Iida, and R. Guthrie, The Physical Properties of Liquid Metals. Clarendon Press, Oxford, 1988.
   Google Scholar