References
- R. S. Bunker, The Augmentation of Internal Blade Tip-Cap Cooling by Arrays of Shaped Pins, J. Turbomachinery, vol. 130, no. 4, pp. 11–21, 2008.
- G. N. Xie, B. Sunden, and Q. W. Wang, Predictions of Enhanced Heat Transfer of An Internal Blade Tip-Wall with Hemishperical Dimples or Protrusions, J. Turbomachinery, vol. 133, no. 4, pp. 91–100, 2010.
- H. K. Moon, T. O’Connell, and B. Glezer, Channel Height Effect on Heat Transfer and Friction in a Dimpled Passage, J. Eng. Gas Turbines Power, vol. 122, no. 2, pp. 307–313, 2000.
- P. M. Ligrani, G. I. Mahmood, J. L. Harrison, C. M. Clayton, and D. L. Nelson, Flow Structure and Local Nusselt Number Variations in a Channel with Dimples and Protrusions on Opposite Walls, Int. J. Heat Mass Transfer, vol. 44, no. 23, pp. 4413–4425, 2001.
- G. I. Mahmood, M. Z. Sabbagh, and P. M. Ligrani, Heat Transfer in a Channel with Dimples and Protrusions on Opposite Walls, J. Thermophysics Heat Transfer, vol. 15, no. 3, pp. 275–283, 2001.
- N. K. Burgess, M. M. Oliveira, and P. M. Ligrani, Nusselt Number Behavior on Deep Dimpled Surfaces within a Channel, J. Heat Transfer, vol. 125, no. 1, pp. 11–18, 2003.
- S. W. Chang, K. F. Chiang, T. L. Yang, and C. C. Huang, Heat Transfer and Pressure Drop in Dimpled Fin Channels, Exp. Thermal Fluid Sci., vol. 33, no. 1, pp. 23–40, 2008.
- J. Park, P. R. Desam, and P. M. Ligrani, Numerical Predictions of Flow Structure Above a Dimpled Surface in a Channel, Numer. Heat Transfer, Part A, vol. 45, no. 1, pp. 1–20, 2004.
- Z. Y. Shen, Y. H. Xie, and D. Zhang, The Study of Heat Transfer Performance of u-shape Cooling Channel with Dimples, J. Xi’an Jiaotong Univ., vol. 47, no. 3, pp. 108–113, 2013.
- Y. W. Kim and D. E. Metzger, Heat Transfer and Effectiveness on Film Cooled Turbine Blade Tip Models, J. Turbomachinery, vol. 117, no. 1, pp. 12–21, 1995.
- V. Saxena and S. V. Ekkad, Effect of Squealer Geometry on Tip Flow and Heat Transfer for a Turbine Blade in a Low Speed Cascade, Trans. ASME J. Heat Transfer, vol. 126, no. 4, pp. 546–553, 2004.
- D. H. Rhee and H. H. Cho, Effect of Vane/Blade Relative Position on Heat Transfer Characteristics in a Stationary Turbine Blade: Part 1. Tip and Shroud, Int. J. Thermal Sci., vol. 47, no. 11, pp. 1528–1543, 2008.
- D. H. Rhee and H. H. Cho, Effect of Vane/Blade Relative Position on Heat Transfer Characteristics in a Stationary Turbine Blade: Part 2. Blade Surface, Int. J. Thermal Sci., vol. 47, no. 11, pp. 1544–1554, 2008.
- D. M. Lee, J. S. Park, D. H. Lee, S. Lee, B. S. Kim, and H. H. Cho, Heat-Transfer Characteristics of a Non-Rotating Two-Pass Rectangular Duct with Various Guide Vanes in the Tip Turn Region, J. Turbomachinery, vol. 134, no. 5, pp. 051039, 2012.
- G. N. Xie, B. Sundén, L. K. Wang, and E. Utriainen, Effect of Pin Base-Fillet on Heat Transfer Enhancement of an Internal Blade Pin-Finned Tip-Wall, ASME 2009 Heat Transfer Summer Conference collocated with the InterPACK09 and 3rd Energy Sustainability Conferences, HT2009–88116, 2009
- G. N. Xie, B. Sunden, L. K. Wang, and E. Utriainien, Augmented Heat Transfer of an Internal Blade Tip by Full or Partial Arrays of Pin-Fins, Heat Transfer Res., vol. 41, no. 1, pp. 65–81, 2011.
- G. N. Xie and B. Sundén, Numerical Predictions of Augmented Heat Transfer of an Internal Blade Tip-Wall by Hemispherical Dimples, Int. J. Heat Mass Transfer, vol. 53, no. 25, pp. 5639–5650, 2010.
- G. N. Xie, B. Sundén, Wang LK, and E. Utriainien, Parametric Study on Heat Transfer Enhancement and Pressure Drop of an Internal Blade Tip-Wall with Pin-Fin Arrays, Heat Mass Transfer, vol. 47, no. 1, pp. 45–57, 2011.
- G. N. Xie, B. Sundén, and W. H. Zhang, Comparisons of Pins/Dimples/Protrusions Cooling Concepts for a Turbine Blade Tip-Wall at High Reynolds Numbers, J. Heat Transfer, vol. 133, no. 6, pp. 061902, 2011.
- J. Han, Turbine Blade Cooling Studies at Texas A&M University: 1980–2004, J. Thermophysics Heat Transfer, vol. 20, no. 2, pp. 161–187, 2006.
- Y. H. Xie, P. Li, J. B. Lan, and D. Zhang, Flow and Heat Transfer Characteristics of Single Jet Impinging on Dimpled Surface, Int. J. Heat Mass Transfer, vol. 135, no. 5, pp. 1–10, 2013.
- D. Zhang, H. C. Qu, J. B. Lan, J. H. Chen, and Y. H. Xie, Flow and Heat Transfer Characteristics of Single Jet Impinging on Protrusioned Surface, Int. J. Heat Mass Transfer, vol. 58, no. 1–2, pp. 18–28, 2013.