Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 70, 2016 - Issue 9
446
Views
26
CrossRef citations to date
0
Altmetric
Original Articles

Numerical simulation and multiobjective optimization of a microchannel heat sink with arc-shaped grooves and ribs

, , , &
Pages 1041-1055 | Received 21 Apr 2016, Accepted 09 Aug 2016, Published online: 24 Oct 2016

References

  • D. B. Tuckerman and R. F. W. Pease, High-Performance Heat Sinking for VLSI, IEEE Electr. Device. L., vol. 2, pp. 126–129, 1981.
  • M. Choi and K. Cho, Effect of the Aspect Ratio of Rectangular Channels on the Heat Transfer and Hydrodynamics of Paraffin Slurry Flow, Int. J. Heat Mass Transfer, vol. 44, pp. 55–61, 2001.
  • W. L. Qu and I. Mudawar, Experimental and Numerical Study of Pressure Drop and Heat Transfer in a Single-Phase Micro-Channel Heat Sink, Int. J. Heat Mass Transfer, vol. 45, pp. 2549–2565, 2002.
  • H. Y. Wu and P. Cheng, Friction Factors in Smooth Trapezoidal Silicon Microchannels with Different Aspect Ratios, Int. J. Heat Mass Transfer, vol. 46, pp. 2519–2525, 2003.
  • H. A. Mohammed, P. Gunnasegaran, and N. H. Shuaib, Influence of Channel Shape on the Thermal and Hydraulic Performance of Microchannel Heat Sink, Int. Commun. Heat Mass Transfer, vol. 46, pp. 474–480, 2011.
  • H. Shafeie, O. Abouali, K. Jafarpur, and G. Ahmadi, Numerical Study of Heat Transfer Performance of Single-Phase Heat Sinks with Micro Pin-Fin Structures, Appl. Therm. Eng., vol. 58, pp. 68–76, 2013.
  • A. A. Alfaryjat, H. A. Mohammed, N. M. Adam, M. K. A. Ariffin, and M. I. Najafabadi, Fluence of Geometrical Parameters of Hexagonal, Circular, and Rhombus Microchannel Heat Sinks on the Thermohydraulic Characteristics, Int. Commun. Heat Mass Transfer, vol. 52, pp. 121–131, 2014.
  • G. L. Morini, Single-Phase Convective Heat Transfer in Microchannels: A Review of Experimental Results, Int. J. Thermal Sci., vol. 43, pp. 631–651, 2004.
  • A. M. Adham, N. Mohd-Ghazali, and R. Ahmad, Thermal and Hydrodynamic Analysis of Microchannel Heat Sinks: A Review, Renew, Sust. Energ. Rev., vol. 21, pp. 614–622, 2013.
  • H. Ghaedamini, P. S. Lee, and C. J. Teo, Developing Forced Convection in Converging–Diverging Microchannels, Int. J. Heat Mass Transfer, vol. 65, pp. 491–499, 2013.
  • G. D. Xia, L. Chai, H. Y. Wang, M. Z. Zhou, and Z. Z. Cui, Optimum Thermal Design of Microchannel Heat Sink with Triangular Reentrant Cavities, Appl. Therm. Eng., vol. 31, pp. 1208–1219, 2011.
  • L. Chai, G. D. Xia, M. Z. Zhou, and J. Li, Numerical Simulation of Fluid Flow and Heat Transfer in a Microchannel Heat Sink with Offset Fan-Shaped Reentrant Cavities in Sidewall, Int. Commun. Heat Mass Transfer, vol. 38, pp. 577–584, 2011.
  • G. D. Xia, L. Chai, L. Wang, M. Z. Zhou, and Z. Z. Cui, Heat Transfer Enhancement in Microchannel Heat Sinks with Periodic Expansion–Constriction Cross-Sections, Int. J. Heat Mass Transfer, vol. 62, pp. 741–751, 2013.
  • O. Abouali and N. Baghernezhad, Numerical Investigation of Heat Transfer Enhancement in a Microchannel with Grooved Surfaces, J. Heat Transfer, vol. 132, pp. 041005, 2010.
  • A. Korichi and L. Oufer, Heat Transfer Enhancement in Oscillatory Flow in Channel with Periodically Upper and Lower Walls Mounted Obstacles, Int. J. Heat Fluid Flow, vol. 28, pp. 1003–1012, 2007.
  • G. N. Xie, Y. L. Li, F. L. Zhang, and B. Sundén, Analysis of Micro-Channel Heat Sinks with Rectangular-Shaped Flow Obstructions, Numer. Heat Transfer–Part A, vol. 69, pp. 335–351, 2016.
  • L. Chai, G. D. Xia, and H. S. Wang, Numerical Study of Laminar Flow and Heat Transfer in Microchannel Heat Sink with Offset Ribs on Sidewalls, Appl. Therm. Eng., vol. 92, pp. 32–41, 2016.
  • G. D. Xia, Y. L. Zhai, and Z. Z. Cui, Numerical Investigation of Thermal Enhancement in a Micro Heat Sink with Fan-Shaped Reentrant Cavities and Internal Ribs, Appl. Therm. Eng., vol. 58, pp. 52–60, 2013.
  • Y. L. Zhai, G. D. Xia, X. F. Liu, and Y. F. Li, Heat Transfer in the Microchannels with Fan-Shaped Reentrant Cavities and Different Ribs Based on Field Synergy Principle and Entropy Generation Analysis, Int. J. Heat Mass Transfer, vol. 68, pp. 224–233, 2014.
  • G. L. Wang, D. Niu, F. Q. Xie, Y. Wang, X. L. Zhao, and G. F. Ding, Experimental and Numerical Investigation of a Microchannel Heat Sink (MCHS) with Micro-Scale Ribs and Grooves for Chip Cooling, Appl. Therm. Eng., vol. 85, pp. 61–70, 2015.
  • K. Foli, T. Okabe, and M. Olhofer, Optimization of Micro Heat Exchanger: CFD, Analytical Approach and Multi-Objective Evolutionary Algorithms, Int. J. Heat Mass Transfer, vol. 49, pp. 1090–1099, 2006.
  • S. Ndao, Y. Peles, and M. K. Jensen, Multi-Objective Thermal Design Optimization and Comparative Analysis of Electronics Cooling Technologies, Int. J. Heat Mass Transfer, vol. 52, pp. 4317–4326, 2009.
  • D. Ansari, A. Husain, and K. Y. Kim, Multi-Objective Optimization of a Grooved Micro-Channel Heat Sink, IEEE T COMPON PACK T., vol. 33, pp. 767–776, 2010.
  • A. Bejan, Entropy Generation Minimization: The New Thermodynamics of Finite Size Device and Finite Time Process, J. Appl. Phys., vol. 79, pp. 1191–1214, 1996.
  • Y. T. Yang, Y. H. Wang, and B. Y. Huang, Numerical Optimization for Nanofluid Flow in Microchannels Using Entropy Generation Minimization, Numer. Heat Transfer–Part A, vol. 67, pp. 571–588, 2015.
  • W. A. Khan, M. B. Kadri, and Q. Ali, Optimization of Microchannel Heat Sinks Using Genetic Algorithm, Heat Transfer Eng., vol. 34, pp. 279–287, 2013.
  • M. Gad-el-Hak, The Fluid Mechanics of Microdevices - The Freeman Scholar Lecture, J. Fluids Eng., vol. 121, pp. 5–33, 1999.
  • N. V. Queipo, R. T. Haftka, W. Shyy, T. Goela, R. Vaidyanathan, and P. K. Tucker, Surrogate-Based Analysis and Optimization, Prog. Aerosp. Sci., vol. 41, pp. 1–28, 2005.
  • M. Stein, Large Sample Properties of Simulations Using Latin Hypercube Sampling, Technometrics, vol. 29, pp. 143, 1987.
  • J. F. Guo, M. T. Xu, and L. Cheng, Second Law Analysis of Curved Rectangular Channel, Int. J. Therm. Sci., vol. 50, pp. 760–768, 2011.
  • A. Husain and K. Y. Kim, Optimization of a Microchannel Heat Sink with Temperature Dependent Fluid Properties, Appl. Therm. Eng., vol. 28, pp. 1101–1107, 2008.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.