References
- J. D. Stanitz, A Review of Certain Inverse Methods for the Design of Ducts with 2 or 3-Dimensional Potential Flow, Appl. Mech. Rev., vol. 41, pp. 217–238, 1988. http://appliedmechanicsreviews.asmedigitalcollection.asme.org/mobile/article.aspx?articleID=1394074
- C. D. Nelson and T. Yang, Design of Branched and Unbranched Axially Symmetrical Ducts with Specified Pressure Distribution, AIAA J., vol. 15, pp. 1272–1277, 1977. http://arc.aiaa.org/doi/abs/10.2514/3.60784
- P. Chaviaropoulos, V. Dedoussis, and K. D. Papailion, On the 3-D Inverse Potential Target Pressure Problem. Part I: Theoretical Aspects and Method Formulation, J. Fluid Mech., vol. 282, pp. 131–146, 1995. http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=353015&fulltextType=RA&fileId=S0022112095000061
- P. Chaviaropoulos, V. Dedoussis, and K. D. Papailion, On the 3-D Inverse Potential Target Pressure Problem. Part II: Numerical Aspects and Application to Duct Design, J. Fluid Mech., vol. 282, pp. 147–162, 1995. http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=353018&fulltextType=RA&fileId=S0022112095000073
- L. Zannetti, A Natural Formulation for the Solution of Two-Dimensional or Axis-Symmetric Inverse Problems, Int. J. Numer. Methods Eng., vol. 22, pp. 451–463, 1986. http://onlinelibrary.wiley.com/doi/10.1002/nme.1620220211/abstract
- A. Ashrafizadeh, G. D. Raithby, and G. D. Stubley, Direct Design of Shape, Numer. Heat Transfer Part B, vol. 41, pp. 501–520, 2002. http://www.tandfonline.com/doi/abs/10.1080/10407790190053752
- A. Ashrafizadeh, G. D. Raithby, and G. D. Stubley, Direct Design of Airfoil Shape with a Prescribed Surface Pressure, Numer. Heat Transfer Part B, vol. 46, pp. 505–527, 2004. http://www.tandfonline.com/doi/abs/10.1080/104077990502989
- A. Ashrafizadeh and G. D. Raithby, Direct Design Solution of the Elliptic Grid Generation Equations, Numer. Heat Transfer Part B, vol. 50, pp. 217–230, 2006. http://www.tandfonline.com/doi/abs/10.1080/10407790600599009
- J. E. Borges, Computational Method for the Design of Ducts, Comput. Fluids, vol. 36, pp. 480–483, 2007. http://www.sciencedirect.com/science/article/pii/S0045793006000193
- A. K. da Silva and L. Gosselin, Evolutionary Placement of Discrete Heaters in Forced Convection, Numer. Heat Transfer Part A, vol. 54, pp. 20–33, 2008. http://www.tandfonline.com/doi/full/10.1080/10407780802024864
- I. Ozkol and G. Komurgoz, Determination of the Optimum Geometry of the Heat Exchanger Body via a Genetic Algorithm, Numer. Heat Transfer Part A, vol. 48, pp. 283–296, 2005. http://www.tandfonline.com/doi/full/10.1080/10407780590948891
- M. Cavazzuti and M. A. Corticelli, Optimization of Heat Exchanger Enhanced Surfaces Through Multiobjective Genetic Algorithms, Numer. Heat Transfer Part A, vol. 54, pp. 603–624, 2008. http://www.tandfonline.com/doi/full/10.1080/10407780802289335
- A. Moparthi, R. Das, R. Uppaluri, and S. C. Mishra, Optimization of Heat Fluxes on the Heater and the Design Surfaces of a Radiating-Conducting Medium, Numer. Heat Transfer Part A, vol. 56, pp. 846–860, 2009. http://www.tandfonline.com/doi/full/10.1080/10407780903423841
- S. M. H. Sarvari, Optimal Geometry Design of Radiative Enclosures Using the Genetic Algorithm, Numer. Heat Transfer Part A, vol. 52, pp. 127–143, 2007. http://www.tandfonline.com/doi/full/10.1080/10407780601115020
- S. Vakili and M. S. Gadala, A Modified Sequential Particle Swarm Optimization Algorithm with Future Time Data for Solving Transient Inverse Heat Conduction Problems, Numer. Heat Transfer Part A, vol. 59, pp. 911–933, 2011. http://www.tandfonline.com/doi/full/10.1080/10407782.2011.582421
- M. D. Ardakani and M. Khodadad, Identification of Thermal Conductivity and the Shape of an Inclusion Using the Boundary Elements Method and the Particle Swarm Optimization Algorithm, Inverse Prob. Sci. Eng., vol. 17, pp. 855–870, 2009. http://www.tandfonline.com/doi/full/10.1080/17415970902884136
- R. V. Rao and V. K. Patel, Thermodynamic Optimization of Cross Flow Plate-Fin Heat Exchanger Using a Particle Swarm Optimization Algorithm, Int. J. Therm. Sci., vol. 49, pp. 1712–1721, 2010. http://www.sciencedirect.com/science/article/pii/S1290072910000931
- V. K. Patel and R. V. Rao, Design Optimization of Shell-and-Tube Heat Exchanger Using Particle Swarm Optimization Technique, Appl. Therm. Eng., vol. 30, pp. 1417–1425, 2010. http://www.sciencedirect.com/science/article/pii/S1359431110001080
- C. H. Cheng and C. Y. Wu, An Approach Combining Body Fitted Grid Generation and Conjugate Gradient Methods for Shape Design in Heat Conduction Problems, Numer. Heat Transfer Part B, vol. 37, pp. 69–83, 2000. http://www.tandfonline.com/doi/abs/10.1080/104077900275558#.VPRCjfmUe58
- C. H. Lan, C. H. Cheng, and C. Y. Wu, Shape Design for Heat Conduction Problems Using Curvilinear Grid Generation Conjugate Method and Redistribution Method, Numer. Heat Transfer Part B, vol. 41, pp. 487–510, 2001. http://www.tandfonline.com/doi/abs/10.1080/10407780116706
- C. H. Huang and W. C Chen, A Three-Dimensional Inverse Forced Convection Problem in Estimating Surface Heat Flux by Conjugate Gradient Method, Int. J. Heat Mass Transfer, vol. 43, pp. 3171–3181, 2000. http://www.sciencedirect.com/science/article/pii/S0017931099003300
- C. H. Cheng and M. H. Chang, Shape Design for a Cylinder with Uniform Temperature Distribution on the Outer Surface by Inverse Heat Transfer Method, Int. J. Heat Mass Transfer, vol. 46, pp. 2643–2654, 2003. http://www.sciencedirect.com/science/article/pii/S0017931002002260
- M. Prud’homme and T. Hung Nguyen, Solution of Inverse Free Convection Problems by Conjugate Gradient Method: Effects of Rayleigh Number, Int. J. Heat Mass Transfer, vol. 44, pp. 2011–2027, 2001. http://www.sciencedirect.com/science/article/pii/S0017931000002660
- H. M. Park and H. J. Shin, Shape Identification for Natural Convection Problems Using the Adjoint Variable Method, J. Comput. Phys., vol. 186, pp. 198–211, 2003. http://www.sciencedirect.com/science/article/pii/S0021999103000469
- S. M. Hosseini Sarvari and S. H. Mansouri, Inverse Design for Radiative Heat Source in Two-Dimensional Participating Media, Numer. Heat Transfer Part B, vol. 46, pp. 283–300, 2004. http://www.tandfonline.com/doi/full/10.1080/10407790490475247#abstract
- C. T. Salinas, Inverse Radiation Analysis in Two-Dimensional Gray Media Using the Discrete Ordinates Method with a Multidimensional Scheme, Int. J. Therm. Sci., vol. 49, pp. 302–310, 2010. http://www.sciencedirect.com/science/article/pii/S1290072909001835
- A. Demeulenaere and R. van den Braembussche, Three-Dimensional Inverse Method for Turbomachinery Blading Design, ASME J. Turbomach., vol. 120, pp. 247–255, 1998. http://turbomachinery.asmedigitalcollection.asme.org/article.aspx?articleid=1465412
- L. de Vito, R. A. Van den Braembussche, and H. Deconinck, A Novel Two-Dimensional Viscous Inverse Design Method for Turbomachinery Blading, ASME J. Turbomach., vol. 125, pp. 310–316, 2003. http://turbomachinery.asmedigitalcollection.asme.org/article.aspx?articleid=1466580
- R. L. Barger and C. W Brooks, A Streamline Curvature Method for Design of Supercritical and Subcritical Airfoils. NASA Tech. Note D-7770, 1974. http://ntrs.nasa.gov/search.jsp?R=19740024303
- P. Garabedian and G. McFadden, Design of Supercritical Swept Wings, AIAA J., vol. 20, pp. 289–291, 1982. http://arc.aiaa.org/doi/abs/10.2514/3.7912
- J. Malone, J. Vadyak, and L. N. Sankar, Inverse Aerodynamic Design Method for Aircraft Components, J. Aircraft, vol. 24, pp. 8–9, 1986. http://arc.aiaa.org/doi/abs/10.2514/3.45403
- M. Safari, M. Nili-Ahmadabadi, A. Ghaei, and E. Shirani, Inverse Design in Subsonic and Transonic External Flow Regimes Using Elastic Surface Algorithm, Comput. Fluids, vol. 102, pp. 41–51, 2014. http://www.sciencedirect.com/science/article/pii/S0045793014002448
- M. Nikfar, A. Ashrafizadeh, and P. Mayeli, Inverse Shape Design via a New Physical-Based Iterative Solution Strategy, Inverse Prob. Sci. Eng., vol. 23, pp. 1138–1162, 2015. http://www.tandfonline.com/doi/abs/10.1080/17415977.2014.973873.
- M. Nili-Ahmadabadi, M. Durali, A. Hajilouy, and F. Ghadak, Inverse Design of 2D Subsonic Ducts Using Flexible String Algorithm, Inverse Prob. Sci. Eng., vol. 17, pp. 1037–1057, 2009. http://www.tandfonline.com/doi/full/10.1080/17415970903047451
- M. Nili-Ahmadabadi, A. Hajilouy, F. Ghadak, and M. Durali, A Novel 2-D Incompressible Viscous Inverse Design Method for Internal Flows Using Flexible String Algorithm, J. Fluids Eng., vol. 132, pp. 031401:1–031401:10, 2010. http://fluidsengineering.asmedigitalcollection.asme.org/article.aspx?articleid=1433423
- M. Nili Ahmadabadi, F. Ghadak, and M. Mohammadi, Subsonic and Transonic Airfoil Inverse Design via Ball-Spine Algorithm, Comput. Fluids, vol. 84, pp. 87–96, 2013. http://www.sciencedirect.com/science/article/pii/S004579301300193X
- N. S. Vaghefi, M. Nili-Ahmadabadi, and M. R. Roshani, Optimal Design of Axe-Symmetric Diffuser via Genetic Algorithm and Ball-Spine Inverse Design Method, ASME Proc. Micro- Nano-Syst. Eng. Pack., vol. 9, pp. 893–902, 2012. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1751824
- A. Madadi, M. J. Kermani, and M. Nili-Ahmadabadi, Application of an Inverse Design Method to Meet a Target Pressure in Axial-Flow Compressors, ASME Proc. Turbomach., vol. 7, pp. 1315–1322, 2011. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1633963&resultClick=1
- A. Madadi, M. J. Kermani, and M. Nili-Ahmadabadi, Application of the Ball-Spine Algorithm to Design Axial-Flow Compressor Blade, Sci. Iranica, vol. 21, pp. 1981–1992, 2014. http://www.scientiairanica.com/en/ManuscriptDetail?mid=300
- A. Madadi, M. J. Kermani, and M. Nili-Ahmadabadi, Applying the Ball-Spine Algorithm to the Design of Blunt Leading Edge Airfoils for Axial Flow Compressors, J. Mech. Sci. Technol., vol. 28, pp. 4517–4526, 2014. http://link.springer.com/article/10.1007%2Fs12206-014-1019-0
- A. Madadi, M. J. Kermani, and M. Nili-Ahmadabadi, Aerodynamic Design of S-Shaped Diffusers Using Ball–Spine Inverse Design Method, J. Eng. Gas Turbines Power, vol. 136, pp. 122606–1–122606–8, 2014. http://gasturbinespower.asmedigitalcollection.asme.org/mobile/article.aspx?articleid=1885200
- M. Shumal, M. Nili-Ahmadabadi, and E. Shirani, Development of the Ball-Spine Inverse Design Algorithm to Swirling Viscous Flow for Performance Improvement of an Axisymmetric Bend Duct, Aerosp. Sci. Technol., vol. 52, pp. 181–1888, 2016. http://www.sciencedirect.com/science/article/pii/S1270963816300669
- P. Mayeli, M. Nili-Ahmadabadi, and H. Besharati-Foumani, Inverse Shape Design for Heat Conduction Problems via Ball Spine Algorithm, Numer. Heat Transfer Part B, vol. 69, pp. 249–269, 2016. http://www.tandfonline.com/doi/full/10.1080/10407790.2015.1096690
- P. Mayeli, M. Nili-Ahmadabadi, M. R. Pirzadeh, and P. Rahmani, Determination of Desired Geometry by a Novel Extension of Ball Spine Algorithm Inverse Method to Conjugate Heat Transfer Problems, Comput. Fluids, Accepted for publication.
- H. Brinkman, The Viscosity of Concentrated Suspensions and Solutions, J. Chem. Phys., vol. 20, pp. 571–581, 1952. http://scitation.aip.org/content/aip/journal/jcp/20/4/10.1063/1.1700493
- J. C. Maxwell, Electricity and Magnetism, Clarendon Press, Oxford, UK, 1873.
- A. Ashrafizadeh, B. Alinia, and P. Mayeli, A New Co-Located Pressure-Based Discretization Method for the Numerical Solution of Incompressible Navier-Stokes Equations, Numer. Heat Transfer Part B, vol. 67, pp. 563–589, 2015. http://www.tandfonline.com/doi/full/10.1080/10407790.2014.992094#