Role of various moving walls on entropy generation during mixed convection within entrapped porous triangular cavities

References

• C. T’Joen, P. De Jaeger, H. Huisseune, S. Van Herzeele, N. Vorst, and M. De Paepe, Thermo-Hydraulic Study of a Single Row Heat Exchanger Consisting of Metal Foam Covered Round Tubes, Int. J. Heat Mass Transfer, vol. 53, pp. 3262–3274, 2010.
   Web of Science ®Google Scholar
• M. M. Billah, M. M. Rahman, U. M. Sharif, N. A. Rahim, R. Saidur, and M. Hasanuzzaman, Numerical Analysis of Fluid Flow due to Mixed Convection in a Lid-Driven Cavity Having a Heated Circular Hollow Cylinder, Int. Commun. Heat Mass Transfer, vol. 38, pp. 1093–1103, 2011.
   Web of Science ®Google Scholar
• F. Ilinca, J. F. Hetu, and F. Ajersch, Three-Dimensional Numerical Simulation of Turbulent Flow and Heat Transfer in a Continuous Galvanizing Bath, Numer. Heat Transfer A, vol. 44, pp. 463–482, 2003.
   Web of Science ®Google Scholar
• A. G. A. Ghani, M. M. Farid, and S. J. Zarrouk, The Effect of Can Rotation on Sterilization of Liquid Food Using Computational Fluid Dynamics, J. Food Eng., vol. 57, pp. 9–16, 2003.
   Web of Science ®Google Scholar
• M. Prieto, J. Diaz, and E. Egusquiza, Analysis of the Fluid-Dynamic and Thermal Behaviour of a Tin Bath in Float Glass Manufacturing, Int. J. Thermal Sci., vol. 41, pp. 348–359, 2002.
   Web of Science ®Google Scholar
• Z. M. Wan, G. Q. Guo, K. L. Su, Z. K. Tu, and W. Liu, Experimental Analysis of Flow and Heat Transfer in a Miniature Porous Heat Sink for High Heat Flux Application, Int. J. Heat Mass Transfer, vol. 55, pp. 4437–4441, 2012.
   Web of Science ®Google Scholar
• N. O. Moraga, S. D. Ramirez, M. J. Godoy, and P. D. Ticchione, Study of Convective Non-Newtonian Alloy Solidification in Molds by the Psimpler/Finite-Volume Method, Numer. Heat Transfer A, vol. 57, pp. 936–953, 2010.
   Web of Science ®Google Scholar
• D. Pal and S. Chatterjee, MHD Non-Darcy Mixed Convection Stagnation-Point Flow of a Micropolar Fluid Towards a Stretching Sheet with Radiation, Chem. Eng. Commun., vol. 199, pp. 1169–1193, 2012.
   Web of Science ®Google Scholar
• S. Mahmud and R. A. Fraser, Vibrational Effect on Heat Transfer and Entropy Generation in an Elliptic Porous Cavity, Int. J. Numer. Methods Heat Fluid Flow, vol. 16, pp. 151–171, 2006.
   Web of Science ®Google Scholar
• I. Zahmatkesh, On the Importance of Thermal Boundary Conditions in Heat Transfer and Entropy Generation for Natural Convection Inside a Porous Enclosure, Int. J. Thermal Sci., vol. 47, pp. 339–346, 2008.
   Web of Science ®Google Scholar
• Y. Varol, H. F. Oztop, and I. Pop, Entropy Generation due to Natural Convection in Non-Uniformly Heated Porous Isosceles Triangular Enclosures at Different Positions, Int. J. Heat Mass Transfer, vol. 52, pp. 1193–1205, 2009.
   Web of Science ®Google Scholar
• H. Heidary, M. Pirmohammadi, and M. Davoudi, Control of Free Convection and Entropy Generation in Inclined Porous Media, Heat Transfer Eng. vol. 33, pp. 565–573, 2012.
   Web of Science ®Google Scholar
• T. Basak, R. S. Kaluri, and A. R. Balakrishnan, Effects of Thermal Boundary Conditions on Entropy Generation during Natural Convection, Numer. Heat Transfer A, vol. 59, pp. 372–402, 2011.
   Web of Science ®Google Scholar
• T. Basak, R. S. Kaluri, and A. R. Balakrishnan, Entropy Generation during Natural Convection in a Porous Cavity: Effect of Thermal Boundary Conditions, Numer. Heat Transfer A, vol. 62, pp. 336–364, 2012.
   Web of Science ®Google Scholar
• A. H. Mahmoudi, M. Shahi, and F. Talebi, Entropy Generation due to Natural Convection in a Partially Open Cavity with a Thin Heat Source Subjected to a Nanofluid, Numer. Heat Transfer A, vol. 61, pp. 283–305, 2012.
   Web of Science ®Google Scholar
• T. Basak, P. Gunda, and R. Anandalakshmi, Analysis of Entropy Generation during Natural Convection in Porous Right-Angled Triangular Cavities with Various Thermal Boundary Conditions, Int. J. Heat Mass Transfer, vol. 55, pp. 4521–4535, 2012.
   Web of Science ®Google Scholar
• I. A. Badruddin, A. A. A. A. Al-Rashed, N. J. S. Ahmed, S. Kamangar, and K. Jeevan, Natural Convection in a Square Porous Annulus, Int. J. Heat Mass Transfer, vol. 55, pp. 7175–7187, 2012.
   Web of Science ®Google Scholar
• S. Bhardwaj and A. Dalal, Analysis of Natural Convection Heat Transfer and Entropy Generation Inside Porous Right-Angled Triangular Enclosure, Int. J. Heat Mass Transfer, vol. 65, pp. 500–513, 2013.
   Web of Science ®Google Scholar
• R. Anandalakshmi and T. Basak, Analysis of Natural Convection via Entropy Generation Approach in Porous Rhombic Enclosures for Various Thermal Aspect Ratios, Int. J. Heat Mass Transfer, vol. 64, pp. 224–244, 2013.
   Web of Science ®Google Scholar
• D. Ramakrishna, T. Basak, S. Roy, and E. Momoniat, Analysis of Thermal Efficiency via Analysis of Heat Flow and Entropy Generation during Natural Convection within Porous Trapezoidal Cavities, Int. J. Heat Mass Transfer, vol. 77, pp. 98–113, 2014.
   Web of Science ®Google Scholar
• P. A. K. Lam and K. A. Prakash, A Numerical Study on Natural Convection and Entropy Generation in a Porous Enclosure with Heat Sources, Int. J. Heat Mass Transfer, vol. 69, pp. 390–407, 2014.
   Web of Science ®Google Scholar
• A. K. Singh, S. Roy, T. Basak, and E. Momoniat, Role of Entropy Generation on Thermal Management during Natural Convection in a Tilted Square Cavity with Isothermal and Non-Isothermal Hot Walls, Numer. Heat Transfer A, vol. 66, pp. 1243–1267, 2014.
   Web of Science ®Google Scholar
• A. K. Singh, T. Basak, A. Nag, and S. Roy, Role of Entropy Generation on Thermal Management during Natural Convection in Tilted Porous Square Cavities, J. Taiwan Inst. Chem. Eng., vol. 50, pp. 153–172, 2015.
   Web of Science ®Google Scholar
• L. Kolsi, K. Kalidasan, A. Alghamdi, M. N. Borjini, and P. R. Kanna, Natural Convection and Entropy Generation in a Cubical Cavity with Twin Adiabatic Blocks Filled by Aluminum Oxide-Water Nanofluid, Numer. Heat Transfer A, vol. 70, pp. 242–259, 2016.
   Web of Science ®Google Scholar
• V. M. Rathnam, P. Biswal, and T. Basak, Analysis of Entropy Generation during Natural Convection within Entrapped Porous Triangular Cavities during Hot or Cold Fluid Disposal, Numer. Heat Transfer A, vol. 69, pp. 931–956, 2016.
   Web of Science ®Google Scholar
• S. F. Barna, A. A. Bhuiyan, M. H. Banna, and A. K. M. S. Islam, Effect of Inlet to Cavity Width Ratio on Mixed Convection in a Micro Structured Filled Vented Cavity, Proc. 4th BSME-ASME Int. Conf. Therm. Eng., vol. 1, pp. 48–55, 2008.
   Google Scholar
• M. H. Banna, A. K. M. S. Islam, A. S. Milani, and M. Hoorfar, Analysis of Energy and Exergy for Mixed Convection Flow in Microstructure Filled Vented Enclosures, Proc. ASME 9th Int. Conf. Nanochannels, Microchannels Minichannels, vol. 1, pp. 531–539, 2012.
   Google Scholar
• A. K. M. S. Islam, S. F. Barna, M. R. Amin, A. A. Bhuiyan, and M. H. Banna, Mixed Convection and Entropy Generation Characteristics Inside a Porous Cavity with Viscous Dissipation Effect, Proc. ASME Int. Mech. Eng. Congr. Exposition, vol. 9, pp. 533–542, 2010.
   Google Scholar
• M. Roy, T. Basak, and S. Roy, Analysis of Entropy Generation during Mixed Convection in Porous Square Cavities: Effect of Thermal Boundary Conditions, Numer. Heat Transfer A, vol. 68, pp. 925–957, 2015.
   Web of Science ®Google Scholar
• M. Roy, T. Basak, S. Roy, and I. Pop, Analysis of Entropy Generation for Mixed Convection in a Square Cavity for Various Thermal Boundary Conditions, Numer. Heat Transfer A, vol. 68, pp. 44–74, 2015.
   Web of Science ®Google Scholar
• M. Roy, S. Roy, and T. Basak, Analysis of Entropy Generation for Mixed Convection within Porous Square Cavities: Effects of Various Moving Walls, Numer. Heat Transfer A, vol. 70, pp. 738–762, 2016.
   Web of Science ®Google Scholar
• K. Vafai and C. L. Tien, Boundary and Inertia Effects on Flow and Heat Transfer in Porous Media, Int. J. Heat Mass Transfer, vol. 24, pp. 195–203, 1981.
   Web of Science ®Google Scholar
• D. M. Manole and J. L. Lage, The Inertial Effect on the Natural Convection Flow within a Fluid-Saturated Porous Medium, Int. J. Heat Fluid Flow, vol. 14, pp. 376–384, 1993.
   Web of Science ®Google Scholar
• T. Basak and S. Roy, Role of ‘Bejan’s Heatlines’ in Heat Flow Visualization and Optimal Thermal Mixing for Differentially Heated Square Enclosures, Int. J. Heat Mass Transfer, vol. 51, pp. 3486–3503, 2008.
   Web of Science ®Google Scholar
• M. M. Ganzarolli and L. F. Milanez, Natural Convection in Rectangular Enclosures Heated from Below and Symmetrically Cooled from the Sides, Int. J. Heat Mass Transfer, vol. 38, pp. 1063–1073, 1995.
   Web of Science ®Google Scholar
• J. N. Reddy, An Introduction to the Finite Element Method, McGraw-Hill, New York, 1993.
   Google Scholar
• T. Basak, S. Roy, and A. R. Balakrishnan, Effects of Thermal Boundary Conditions on Natural Convection Flows within a Square Cavity, Int. J. Heat Mass Transfer, vol. 49, pp. 4525–4535, 2006.
   Web of Science ®Google Scholar
• P. Biswal and T. Basak, Sensitivity of Heatfunction Boundary Conditions on Invariance of Bejan’s Heatlines for Natural Convection in Enclosures with Various Wall Heatings, Int. J. Heat Mass Transfer, vol. 89, 1342–1368, 2015.
   Web of Science ®Google Scholar
• A. Bejan, Entropy Generation Minimization, CRC Press, Boca Raton, 1996.
   Google Scholar
• D. S. Kumar, A. K. Dass, and A. Dewan, Analysis of Non-Darcy Models for Mixed Convection in a Porous Cavity Using a Multigrid Approach, Numer. Heat Transfer A, vol. 56, pp. 685–708, 2009.
   Web of Science ®Google Scholar