A new general model for phase-change heat transfer of waxy crude oil during the ambient-induced cooling process

References

• M. Kane, M. Djabourov, J. L. Volle, J. P. Lechaire, and G. Frebourg, Morphology of Paraffin Crystals in Waxy Crude Oils Cooled in Quiescent Conditions and Under Flow, Fuel, vol. 82, pp. 127–135, 2003.
   Web of Science ®Google Scholar
• J. M. Letoffe, P. Claudy, M. V. Kok, M. Garcin, and J. L. Volle, Crude oils: Characterization of Waxes Precipitated on Cooling by Dsc and Thermomicroscopy, Fuel, vol. 74, pp. 810–817, 1995.
   Web of Science ®Google Scholar
• X. Liu, B. Yu, J. Zhou, and J. Zhang, Temperature Drop Characteristics of Crude Oils After Shutdown of a Pipeline for a Batchwise Transportation System, Heat Transfer Eng., vol. 34, pp. 385–397, 2013.
   Web of Science ®Google Scholar
• C. Xu, B. Yu, Z. Zhang, J. Zhang, J. Wei, and S. Sun, Numerical Simulation of a Buried Hot Crude Oil Pipeline During Shutdown, Petro. Sci., vol. 7, pp. 73–82, 2010.
   Web of Science ®Google Scholar
• X. Liu, X. Li, and Y. Xu, Study on Heat Transfer Performance of Medium in Aerial Hot Oil Pipe for Shutdown, Adv. Mech. Eng., 571676, 2014.
   Web of Science ®Google Scholar
• T. Lu and K.-S. Wang, Numerical Analysis of the Heat Transfer Associated with Freezing/Solidifying Phase Changes for a Pipeline Filled with Crude Oil in Soil Saturated with Water During Pipeline Shutdown in Winter, J. Petrol. Sci. Eng., vol. 62, pp. 52–58, 2008.
   Web of Science ®Google Scholar
• V. R. Voller and C. Prakash, A Fixed Grid Numerical Modeling Methodology for Convection-Diffusion Mushy Region Phase-Change Problems, Int. J. Heat Mass Transfer, vol. 30, pp. 1709–1719, 1987.
   Web of Science ®Google Scholar
• W. D. Bennon and F. P. Incropera, A Continuum Model for Momentum, Heat and Species Transport in Binary Solid-Liquid Phase Change Systems—I. Model Formulation, Int. J. Heat Mass Transfer, vol. 30, pp. 2161–2170, 1987.
   Web of Science ®Google Scholar
• V. R. Voller, A. D. Brent, and C. Prakash, The Modeling of Heat, Mass and Solute Transport in Solidification Systems, Int. J. Heat Mass Transfer, vol. 32, pp. 1719–1731, 1989.
   Web of Science ®Google Scholar
• M. S. Christenson, W. D. Bennon, and F. P. Incropera, Solidification of an Aqueous Ammonium Chloride Solution in a Rectangular Cavity—II. Comparison of Predicted and Measured Results, Int. J. Heat Mass Transfer, vol. 32, pp. 69–79, 1989.
   Web of Science ®Google Scholar
• S. Chakraborty, N. Chakraborty, P. Kumar, and P. Dutta, Studies on Turbulent Momentum, Heat and Species Transport During Binary Alloy Solidification in a Top-Cooled Rectangular Cavity, Int. J. Heat Mass Transfer, vol. 46, pp. 1115–1137, 2003.
   Web of Science ®Google Scholar
• W. Kowalczyk, C. Hartmann, and A. Delgado, Modeling and Numerical Simulation of Convection Driven High Pressure Induced Phase Changes, Int. J. Heat Mass Transfer, vol. 47, 1079–1089, 2004.
   Web of Science ®Google Scholar
• A. Kumar and P. Dutta, Modeling of Transport Phenomena in Continuous Casting of Non-Dendritic Billets, Int. J. Heat Mass Transfer, vol. 48, pp. 3674–3688, 2005.
   Web of Science ®Google Scholar
• D. Pal, J. Bhattacharya, P. Dutta, and S. Chakraborty, An Enthalpy Model for Simulation of Dendritic Growth, Numer. Heat Transfer B-Fund., vol. 50, pp. 59–78, 2006.
   Web of Science ®Google Scholar
• R. Pardeshi, P. Dutta, and A. K. Singh, Modeling of Convection and Macrosegregation through Appropriate Consideration of Multiphase/Multiscale Phenomena during Alloy Solidification, Ind. Eng. Chem. Res., vol. 48, pp. 8789–8804, 2009.
   Web of Science ®Google Scholar
• C. J. Vreeman and F. P. Incropera, Numerical discretization of Species Equation Source Terms in Binary Mixture Models of Solidification, and Their Impact on Macrosegregation in Semicontinuous, Direct Chill Casting Systems, Numer. Heat Transfer B-Fund., vol. 36, pp. 1–14, 1999.
   Web of Science ®Google Scholar
• A. Kumar, M. Založnik, and H. Combeau, Study of the Influence of Mushy Zone Permeability Laws on Macro-and Meso-Segregations Predictions, Int. J. Therm. Sci., vol. 54, pp. 33–47, 2012.
   Web of Science ®Google Scholar
• H. J. Lin, Modeling of Flow and Heat Transfer in Metal Feeding System Used in Twin Roll Casting, Modell. Simul. Mater. Sci. Eng., vol. 12, pp. 255–272, 2004.
   Web of Science ®Google Scholar
• H. I. Andersson and F. Irgens, Film Flow of Power-Law Fluids, in N. P. Cheremisinoff, (ed.), Encyclopedia of Fluid Mechanics, Polymer Flow Engineering, vol. 9, Gulf Publishing Co., Houston, 1990.
   Google Scholar
• S. Asai and I. Muchi, Theoretical-Analysis and Model Experiments on Formation Mechanism of Channel-Type Segregation, Trans. Iron Steel Inst., Jpn., vol. 18, pp. 90–98, 1978.
   Google Scholar
• F. Nicoud and F. Ducros, Subgrid-Scale Stress Modeling Based on the Square of the Velocity Gradient Tensor, Flow Turbul. Combust., vol. 62, pp. 183–200, 1999.
   Web of Science ®Google Scholar
• Fluent A, Ansys Fluent Theory Guide, ANSYS Inc., USA, 2011.
   Google Scholar
• S. V. Patankar, Numerical Heat Transfer and Fluid Flow, Hemisphere, New York, NY, 1980.
   Google Scholar
• H. Jasak, H. G. Weller, and A. D. Gosman, High Resolution NVD Differencing Scheme for Arbitrarily Unstructured Meshes, Int. J. Numer. Meth. Fluids, vol. 31, pp. 431–449. 1999.
   Web of Science ®Google Scholar
• L. Wang, X. Cui, Q. Miao, F. Song, J. J. Liu, S. J. Zhi, and S. Hu, Research on the Process of Buried Pipeline's Commissioning and Shutdown by Real-scale Flow Loop, Res. Explor. Lab., vol. 30, pp. 22–25, 2011.
   Google Scholar
• L. Wang, Experimental Research on Characteristic of Oil’s Temperature Decrease in Buried Pipe by Real Scale Flow Loop, Master thesis, China University of Petroleum, Dongying, 2010.
   Google Scholar
• B. J. Jones, D. Sun, S. Krishnan, and S. V. Garimella, Experimental, and Numerical Study of Melting in a Cylinder, Int. J. Heat Mass Transfer, vol. 49, pp. 2724–2738, 2006. (Journal Article)
   Web of Science ®Google Scholar
• C. Gau and R. Viskanta, Melting and Solidification of a Pure Metal on a Vertical Wall, J. Heat Transfer, vol. 108, pp. 174–181, 1986.
   Web of Science ®Google Scholar
• X. H. Yang, Design and Management of Oil Pipelines, China University of Petroleum Press, Dongying, 2006.
   Google Scholar
• Y. S. Sun and J. L. Xu, Thermal Performance of Continuously Moving Radiative–Convective Fin of Complex Cross-Section with Multiple Nonlinearities, Int. Commun. Heat Mass Transfer, vol. 63, pp. 23–34, 2015.
   Web of Science ®Google Scholar
• J. Ma, Y. S. Sun, B. Li, and H. Chen, Spectral collocation method for radiative–conductive porous fin with temperature dependent properties, Energy Convers. Manage., vol. 111, pp. 279–288, 2016.
   Web of Science ®Google Scholar
• Y. S. Sun, J. Ma, and B. W. Li, Spectral Collocation Method for Convective–Radiative Transfer of a Moving Rod with Variable Thermal Conductivity, Int. J. Therm. Sci., vol. 90, pp. 187–196, 2015.
   Web of Science ®Google Scholar