References
- J. C. Han, S. Dutta, and S. Ekkad Gas Turbine Heat Transfer and Cooling Technology, Taylor and Francis, New York, 2000.
- S. B. Islami, S. P. A. Tabrizi, and B. A. Jubran Computational Investigation of Film Cooling from Trenched Holes Near the Leading Edge of a Turbine Blade, Numer. Heat Transfer, Part A Appl., vol. 53, no. 3, pp. 308–322, 2008.
- H. H. Cho and R. J. Goldstein Heat (Mass) Transfer and Film Cooling Effectiveness With Injection through Discrete Holes: Part I - Within Holes and on the Back Surface, Trans. ASME J. Turbomach., vol. 117, no. 3, pp. 440–450, 1995.
- A. R. Byerley, P. T. Ireland, T. V. Jones, and S. A. Ashton Detailed Heat Transfer Measurements Near and Within the Entrance of a Film Cooling Hole, Amsterdam, Netherlands, 1988.
- K. I. Funazaki, H. Kawabata, D. Takahashi, and Y. Okita Experimental and Numerical Studies on Leading Edge Film Cooling Performance: Effects of Hole Exit Shape and Freestream Turbulence, Proc. ASME Turbo Expo, Copenhagen, Denmark, 2012.
- K. D. Lee and K. Y. Kim Shape Optimization of a Fan-Shaped Hole to Enhance Film-Cooling Effectiveness, Int. J. Heat Mass Transfer, vol. 53, no. 15–16, pp. 2996–3005, 2010.
- K. D. Lee and K. Y. Kim Surrogate Based Optimization of a Laidback Fan-Shaped Hole for Film-Cooling, Int. J. Heat Fluid Flow, vol. 32, no. 1, pp. 226–238, 2011.
- J. Wang, C. Gu, and B. Sundén Investigations of Film Cooling and Its Nonuniform Distribution for the Conjugate Heat Transfer Passage With a Compound Inclined Angle Jet, Numer. Heat Transfer, Part A Appl., vol. 69, no. 1, pp. 14–30, 2016.
- R. J. Goldstein, H. H. Cho, and M. Y. Jabbari Effect of Plenum Crossflow on Heat (Mass) Transfer Near and Within the Entrance of Film Cooling Holes, J. Turbomach., vol. 119, no. 4, pp. 761–769, 1997.
- Y. Qiu, H. R. Zhu, D.-C. Xu, and S.-L. Liu Effect of Suction Hole on Heat Transfer Characteristic of Internal Passage, Tuijin Jishu/J. Propuls. Technol., vol. 23, no. 6, pp. 477–479, 508, 2002.
- R. L. Webb, E. R. G. Eckert, and R. J. Goldstein Heat Transfer and Friction in Tubes with Repeated-Rib Roughness, Int. J. Heat Mass Transfer, vol. 14, no. 4, pp. 601–617, 1971.
- J. C. Han, S. Ou, J. S. Park, and C. K. Lei Augmented Heat Transfer in Rectangular Channels of Narrow Aspect Ratios With Rib Turbulators, Int. J. Heat Mass Transfer, vol. 32, no. 9, pp. 1619–1630, 1989.
- L. Wang and B. Sundén Experimental Investigation of Local Heat Transfer in a Square Duct with Continuous and Truncated Ribs, Exp. Heat Transfer, vol. 18, no. 3, pp. 179–197, 2005.
- L. Wang and B. Sundén Experimental Investigation of Local Heat Transfer in a Square Duct With Various-Shaped Ribs, Heat Mass Transfer/Waerme-und Stoffuebertragung, vol. 43, no. 8, pp. 759–766, 2007.
- G. Xie, S. Zheng, and B. Sundén Heat Transfer and Flow Characteristics in Rib-/Deflector-Roughened Cooling Channels With Various Configuration Parameters, Numer. Heat Transfer, Part A Appl., vol. 67, no. 2, pp. 140–169, 2015.
- H. H. Cho, S. J. Wu, and H. J. Kwon Local Heat/Mass Transfer Measurements in a Rectangular Duct With Discrete Ribs, J. Turbomach., vol. 122, no. 3, pp. 579–586, 2000.
- H. H. Cho, Y. Y. Kim, D. H. Rhee, S. Y. Lee, S. J. Wu, and C. K. Choi The Effects of Gap Position in Discrete Ribs on Local Heat/Mass Transfer in a Square Duct, J. Enhanced Heat Transfer, vol. 10, no. 3, pp. 287–300, 2003.
- A. Gupta, V. SriHarsha, S. V. Prabhu, and R. P. Vedula Local Heat Transfer Distribution in a Square Channel With 90°Continuous, 90° Saw Tooth Profiled and 60° Broken Ribs, Exp. Therm Fluid Sci., vol. 32, no. 4, pp. 997–1010, 2008.
- D. H. Lee, D. H. Rhee, K. M. Kim, H. H. Cho, and H. K. Moon Detailed Measurement of Heat/Mass Transfer With Continuous and Multiple V-Shaped Ribs in Rectangular Channel, Energy, vol. 34, no. 11, pp. 1770–1778, 2009.
- K. M. Kim, S. I. Kim, Y. H. Jeon, D. H. Lee, and H. H. Cho Detailed Heat/Mass Transfer Distributions in a Rotating Smooth Channel With Bleed Flow, J. Heat Transfer, vol. 129, no. 11, pp. 1538–1545, 2007.
- Y. H. Jeon, S. H. Park, K. M. Kim, D. H. Lee, and H. H. Cho Effects of Bleed Flow on Heat/Mass Transfer in a Rotating Rib-Roughened Channel, J. Turbomach., vol. 129, no. 3, pp. 636–642, 2007.
- K. M. Kim, S. H. Park, Y. H. Jeon, D. H. Lee, and H. H. Cho Heat/Mass Transfer Characteristics in Angled Ribbed Channels With Various Bleed Ratios, and Rotation Numbers, J. Turbomach., vol. 130, no. 3, 2008.
- A. F. Mills Experimental Investigation of Turbulent Heat Transfer in the Entrance Region of a Circular Conduit, J. Mech. Eng. Sci., vol. 4, pp. 63–77, 1962.
- W. Peng, P. X. Jiang, Y. P. Wang, and B. Y. Wei Experimental and Numerical Investigation of Convection Heat Transfer in Channels With Different Types of Ribs, Appl. Therm. Eng., vol. 31, no. 14–15, pp. 2702–2708, 2011.