Effect of geometric configuration on the laminar flow and heat transfer in microchannel heat sinks with cavities and fins

References

• D. B. Tuckerman and R. F. W. Pease High-Performance Heat Sinking for VLSI, IEEE Electron Dev. Lett., vol. 2, pp. 126–129, 1981.
   Web of Science ®Google Scholar
• E. S. Cho, J. W. Choi, J. S. Yoon, and M. S. Kim Experimental Study on Microchannel Heat Sinks Considering Mass Flow Distribution with Non-Uniform Heat Flux Conditions, Int. J. Heat Mass Transfer, vol. 53, pp. 2159–2168, 2010.
   Web of Science ®Google Scholar
• M. Dehghan, M. Daneshipour, M. S. Valipour, R. Rafee, and S. Saedodin Enhancing Heat Transfer in Microchannel Heat Sinks Using Converging Flow Passages, Energy Convers. Manage., vol. 92, pp. 244–250, 2015.
   Web of Science ®Google Scholar
• A. M. Adham, N. Mohd-Ghazali, and R. Ahmad Thermal and Hydrodynamic Analysis of Microchannel Heat Sinks: A Review, Renew. Sust. Energ. Rev., vol. 21, pp. 614–622, 2013.
   Web of Science ®Google Scholar
• Y. L. Zhai, G. D. Xia, X. F. Liu, and J. Wang, Characteristics of Entropy Generation and Heat Transfer in Double-Layered Micro Heat Sinks with Complex Structure, Energy Convers. Manage., vol. 103, pp. 477–486, 2015.
   Web of Science ®Google Scholar
• C. Leng, X. D. Wang, T. H. Wang, and W. M. Yan Optimization of Thermal Resistance and Bottom Wall Temperature Uniformity for Double-Layered Microchannel Heat Sink, Energy Convers. Manage., vol. 93, pp. 141–150, 2015.
   Web of Science ®Google Scholar
• J. L. Xu, Y. X. Song, and W. Zhang Numerical Simulations of Interrupted and Conventional Microchannel Heat Sinks, Int. J. Heat Mass Transfer, vol. 51, pp. 5906–5917, 2008.
   Web of Science ®Google Scholar
• G. N. Xie, Z. Y. Chen, B. Sunden, and W. Zhang Numerical Analysis of Flow and Thermal Performance of Liquid-Cooling Microchannel Heat Sinks with Bifurcation, Numer. Heat Transfer A, vol. 64, pp. 902–919, 2013.
   Web of Science ®Google Scholar
• Z. H. Dai, D. F. Fletcher, and B. S. Haynes Impact of Tortuous Geometry on Laminar Flow Heat Transfer in Microchannels, Int. J. Heat Mass Transfer, vol. 83, pp. 382–398, 2015.
   Web of Science ®Google Scholar
• T. T. Zhang, L. Jia, J. Zhang, and Y. Jaluria Numerical Simulation of Fluid Flow and Heat Transfer in U-Shaped Microchannels, Numer. Heat Transfer A, vol. 66, pp. 217–228, 2010.
   Google Scholar
• A. Danish, H. Afzal, and K. Kwang-Yong Multiobjective Optimization of a Grooved Micro-Channel Heat Sink, IEEE T. Compon. Pack. T., vol. 33, pp. 767–776, 2010.
   Google Scholar
• H. Ghaedamini, P. S. Lee, and C. J. Teo Developing Forced Convection in Converging-Diverging Microchannels, Int. J. Heat Mass Transfer, vol. 65, pp. 491–499, 2013.
   Web of Science ®Google Scholar
• F. J. Hong and P. Cheng Three Dimensional Numerical Analyses and Optimization of Offset Strip-Fin Microchannel Heat Sinks, Int. Commun. Heat Mass Transfer, vol. 36, pp. 651–656, 2009.
   Web of Science ®Google Scholar
• V. V. Dharaiya and S. G. Kandlikar A Numerical Study on the Effects of 2d Structured Sinusoidal Elements on Fluid Flow and Heat Transfer at Microscale, Int. J. Heat Mass Transfer, vol. 57, pp. 190–201, 2013.
   Web of Science ®Google Scholar
• H. E. Ahmed, and M. I. Ahmed Optimum Thermal Design of Triangular, Trapezoidal and Rectangular Grooved Microchannel Heat Sinks, Int. Commun. Heat Mass Transfer, vol. 66, pp. 47–57, 2015.
   Web of Science ®Google Scholar
• G. D. Xia, L. Chai, and M. Z. Zhou Effects of Structural Parameters on Fluid Flow and Heat Transfer in a Microchannel with Aligned Fan-Shaped Reentrant Cavities, Int. J. Therm. Sci., vol. 50, pp. 411–419, 2011.
   Web of Science ®Google Scholar
• G. D. Xia, L. Chai, H. Y. Wang, and Z. Z. Cui Optimum Thermal Design of Microchannel Heat Sink with Triangular Reentrant Cavities, Appl. Therm. Eng., vol. 31, pp. 1208–1219, 2011.
   Web of Science ®Google Scholar
• G. L. Wang, D. W. Yang, Y. Wang, D. Niu, X. L. Zhao, and G. F. Ding Heat Transfer and Friction Characteristics of the Microfluidic Heat Sink with Variously–Shaped Ribs for Chip Cooling, Sensors, vol. 15, pp. 9547–9562, 2015.
   PubMed Web of Science ®Google Scholar
• L. Chai, G. D. Xia, and H. S. Wang Numerical Study of Laminar Flow and Heat Transfer in Microchannel Heat Sink with Offset Ribs on Sidewalls, Appl. Therm. Eng., vol. 92, pp. 32–41, 2016.
   Web of Science ®Google Scholar
• Y. F. Li, G. D. Xia, D. D. Ma, Y. T. Jia, and J. Wang Characteristics of Laminar Flow and Heat Transfer in Microchannel Heat Sink with Triangular Cavities and Rectangular Ribs, Int. J. Heat Mass Transfer, vol. 98, pp. 17–28, 2016.
   Web of Science ®Google Scholar
• R. L. Webb Performance Evolution Criteria for use of Enhanced Heat Transfer Surfaces in Heat Exchanger Design, Int. J. Heat Mass Transfer, vol. 24, pp. 715–726, 1981.
   Web of Science ®Google Scholar
• G. L. Wang, D. Niu, F. Q. Xie, Y. Wang, X. L. Zhao, and G. F. Ding Experimental and Numerical Investigation of a Microchannel Heat Sink (MCHS) with Micro-Scale Ribs and Grooves for Chip Cooling, Appl. Therm. Eng., vol. 85, pp. 61–70, 2015.
   Web of Science ®Google Scholar
• K. C. Wong and J. H. Lee Investigation of Thermal Performance of Microchannel Heat Sink with Triangular Ribs in the Transverse Microchambers, Int. Commun. Heat Mass Transfer, vol. 65, pp. 103–110, 2015.
   Web of Science ®Google Scholar
• G. D. Xia, Y. L. Zhai, and Z. Z. Cui, Numerical Investigation of Flow and Heat Transfer in a Microchannel with Fan-Shaped Reentrant Cavities and Internal Ribs, Appl. Therm. Eng., vol. 58, pp. 52–60, 2013.
   Web of Science ®Google Scholar
• R. F. Service Coming Soon: The Pocket DNA Sequencer, Science, vol. 282, pp. 399–401, 1998.
   PubMed Web of Science ®Google Scholar
• M. E. Steinke and S. G. Kandlikar Single-Phase Liquid Friction Factors in Microchannels, Int. J. Therm. Sci., vol. 45, pp. 1073–1083, 2006.
   Web of Science ®Google Scholar
• S. Kandlikar, S. Garimella, D. Li, S. Colin, and M. R. King Heat Transfer and Fluid Flow in Minichannels and Microchannels, pp. 109–111, Elsevier, UK, 2005.
   Google Scholar
• C. S. Sharma, M. K. Tiwari, B. Michel, and D. Poulikakos Thermofluidics and Energetic of a Manifold Microchannel Heat Sink for Electronic with Recovered Hot Water as Working Fluid, Int. J. Heat Mass Transfer, vol. 58, pp. 135–151, 2013.
   Web of Science ®Google Scholar
• B. C. Wang, Y. F. Hong, L. Wang, X. D. Fang, P. F. Wang, and Z. B. Xu Development and Numerical Investigation of Novel Gradient-Porous Heat Sinks, Energy Convers. Manage., vol. 106, pp. 1370–1378, 2015.
   Web of Science ®Google Scholar