Numerical study on heat transfer enhancement for laminar flow in a tube with mesh conical frustum inserts

References

• Z. H. Lin, J. Wang, R. Y. Li, and G. M. Cui, Enhanced Heat Transfer Technology, Chemical Industry Press, Beijing, pp. 5–6, 2006 (in Chinese).
   Google Scholar
• S. K. Agarwal and M. R. Rao, Heat Transfer Augmentation for the Flow of a Viscous Liquid in Circular Tubes using Twisted Tape Inserts, Int. J. Heat Mass Transfer, vol. 39, no. 17, pp. 3547–3557, 1996.
   Web of Science ®Google Scholar
• K. Wongcharee and S. Eiamsa-Ard, Friction and Heat Transfer Characteristics of Laminar Swirl Flow Through the Round Tubes Inserted with Alternate Clockwise and Counter-clockwise Twisted-tapes, Int. Commun. Heat Mass, vol. 38, no. 3, pp. 348–352, 2011.
   Web of Science ®Google Scholar
• S. W. Chang, T. L. Yang, and J. S. Liou, Heat Transfer and Pressure Drop in Tube with Broken Twisted Tape Insert, Exp. Therm. Fluid Sci., vol. 32, no. 2, pp. 489–501, 2007.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, P. Seemawute, and K. Wongcharee, Influences of Peripherally-cut Twisted Tape Insert on Heat Transfer and Thermal Performance Characteristics in Laminar and Turbulent Tube Flows, Therm. Fluid Sci., vol. 34, no. 6, pp. 711–719, 2010.
   Web of Science ®Google Scholar
• P. Murugesan, K. Mayilsamy, S. Suresh, and P. S. S. Srinivasan, Heat Transfer and Pressure Drop Characteristics in a Circular Tube Fitted with and without V-cut Twisted Tape Insert, Int. Commun. Heat Mass, vol. 38, no. 3, pp. 329–334, 2011.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, C. Thianpong, P. Eiamsa-Ard, and P. Promvonge, Convective Heat Transfer in a Circular Tube with Short-length Twisted Tape Insert, Int. Commun. Heat Mass, vol. 36, no. 4, pp. 365–371, 2009.
   Web of Science ®Google Scholar
• S. R. Shabanian, M. Rahimi, M. Shahhosseini, and A. A. Alsairafi, CFD and Experimental Studies on Heat Transfer Enhancement in an Air Cooler Equipped with Different Tube Inserts, Int. Commun. Heat Mass, vol. 38, no. 3, pp. 383–390, 2011.
   Web of Science ®Google Scholar
• P. Murugesan, K. Mayilsamy, and S. Suresh, Heat Transfer and Friction Factor Studies in a Circular Tube Fitted with Twisted Tape Consisting of Wire-nails, Chin. J. Chem. Eng., vol. 18, no. 6, pp. 1038–1042, 2010.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, K. Wongcharee, P. Eiamsa-Ard, and C. Thianpong, Thermohydraulic Investigation of Turbulent Flow Through a Round Tube Equipped with Twisted Tapes Consisting of Centre Wings and Alternate-axes, Exp. Therm. Fluid Sci., vol. 34, no. 8, pp. 1151–1161, 2010.
   Web of Science ®Google Scholar
• J. Guo, A. W. Fan, X. Y. Zhang, and W. Liu, A Numerical Study on Heat Transfer and Friction Factor Characteristics of Laminar Flow in a Circular Tube Fitted with Center-cleared Twisted Tape, Int. J. Therm. Sci., vol. 50, no. 7, pp. 1263–1270, 2011.
   Web of Science ®Google Scholar
• X. Y. Zhang, Z. C. Liu, and W. Liu, Numerical Studies on Heat Transfer and Flow Characteristics for Laminar Flow in a Tube with Multiple Regularly Spaced Twisted Tapes, Int. J. Therm. Sci., vol. 58, pp. 157–167, 2012.
   Web of Science ®Google Scholar
• Z. M. Lin, L. B. Wang, M. Lin, W. Dang, and Y. H. Zhang, Numerical Study of the Laminar Flow and Heat Transfer Characteristics in a Tube Inserting a Twisted Tape Having Parallelogram Winglet Vortex Generators, Appl. Therm. Eng., vol. 115, pp. 644–658, 2017.
   Web of Science ®Google Scholar
• L. Wang and B. Sunden, An Experimental Investigation of Heat Transfer and Fluid Flow in a Rectangular Duct with Broken V-shaped Ribs, Exp. Heat Transfer, vol. 17, no. 4, pp. 243–259, 2004.
   Web of Science ®Google Scholar
• J. C. Han, S. Ou, J. S. Park, and C. K. Lei, Augmented Heat Transfer in Rectangular Channels of Narrow Aspect Ratios with Rib Turbulators, Int. J. Heat Mass Transfer, vol. 32, no. 9, pp. 1619–1630, 1989.
   Web of Science ®Google Scholar
• M. A. Moon, M. J. Park, and K. Y. Kim, Evaluation of Heat Transfer Performances of Various Rib Shapes, Int. J. Heat Mass Transfer, vol. 71, pp. 275–284, 2014.
   Web of Science ®Google Scholar
• A. Garcia, J. P. Solano, P. G. Vicente, and A. Viedma, The Influence of Artificial Roughness Shape on Heat Transfer Enhancement: Corrugated Tubes, Dimpled Tubes and Wire Coils, Appl. Therm. Eng., vol. 35, pp. 196–201, 2012.
   Web of Science ®Google Scholar
• B. Shome, Numerical Investigation of Flow and Heat Transfer in Twisted Circular-sector Ducts, Numer. Heat Transfer A, vol. 45, no. 10, pp. 977–995. 2004.
   Web of Science ®Google Scholar
• B. M. da Silva Miranda and N. K. Anand, Convective Heat Transfer in a Channel with Porous Baffles, Numer. Heat Transfer A, vol. 46, no. 5, pp. 425–452, 2004.
   Web of Science ®Google Scholar
• S. Pal and S. K. Saha, Laminar Flow and Heat Transfer Through a Circular Tube Having Integral Transverse Corrugations and Fitted with Centre-cleared Twisted-tape, Exp. Therm. Fluid Sci., vol. 57, pp. 388–395, 2014.
   Web of Science ®Google Scholar
• S. Pal and S. K. Saha, Laminar Fluid Flow and Heat Transfer Through a Circular Tube Having Spiral Ribs and Twisted Tapes, Exp. Therm. Fluid Sci., vol. 60, pp. 173–181, 2015.
   Web of Science ®Google Scholar
• S. Eiamsa-ard, P. Promthaisong, C. Thianpong, M. Pimsarn, and V. Chuwattanakul, Influence of Three-start Spirally Twisted Tube Combined with Triple-channel Twisted Tape Insert on Heat Transfer Enhancement, Chem. Eng. Process., vol. 102, pp. 117–129, 2016.
   Web of Science ®Google Scholar
• W. B. Tu, Y. Tang, J. Y. Hu, Q. H. Wang, and L. S. Lu, Heat Transfer and Friction Characteristics of Laminar Flow Through a Circular Tube with Small Pipe Inserts, Int. J. Therm. Sci., vol. 96, pp. 94–101, 2015.
   Web of Science ®Google Scholar
• N. B. Zheng, P. Liu, F. Shan, J. Liu, Z. C. Liu, and W. Liu, Numerical Studies on Thermo-hydraulic Characteristics of Laminar Flow in a Heat Exchanger Tube Fitted with Vortex Rods, Int. J. Therm. Sci., vol. 100, pp. 448–456, 2016.
   Web of Science ®Google Scholar
• P. Liu, N. B. Zheng, F. Shan, Z. C. Liu, and W. Liu, Numerical Study on Characteristics of Heat Transfer and Friction Factor in a Circular Tube with Central Slant Rods, Int. J. Heat Mass Transfer, vol. 99, pp. 268–282, 2016.
   Web of Science ®Google Scholar
• Z. Cao, J. L. Xu, D. L. Sun, J. Xie, F. Xing, Q. C. Chen, and X. D. Wang, Numerical Simulation of Modulated Heat Transfer Tube in Laminar Flow Regime, Int. J. Therm. Sci., vol. 75, pp. 171–183, 2014.
   Web of Science ®Google Scholar
• F. Xing, J. Xie, and J. L. Xu, Modulated Heat Transfer Tube with Mesh Cylinder Inserted, Int. Commun. Heat Mass, vol. 56, pp. 15–24, 2014.
   Web of Science ®Google Scholar
• Q. C. Chen, J. L. Xu, D. L. Sun, Z. Cao, J. Xie, and F. Xing, Numerical Simulation of the Modulated Flow Pattern for Vertical Upflows by the Phase Separation Concept, Int. J. Multiphase Flow, vol. 56, pp. 105–118, 2013.
   Web of Science ®Google Scholar
• J. Xie, J. L. Xu, F. Xing, Z. X. Wang, and H. Liu, The Phase Separation Concept Condensation Heat Transfer in Horizontal Tubes for Low-grade Energy Utilization, Energy, vol. 69, pp. 787–800, 2014.
   Web of Science ®Google Scholar
• Z. Cao and J. L. Xu, Modulated Heat Transfer Tube with Short Conical-mesh Inserts: A Linking from Microflow to Macroflow, Int. J. Heat Mass Transfer, vol. 89, pp. 291–307, 2015.
   Web of Science ®Google Scholar
• J. L. Xu, J. Xie, X. T. He, Y. Cheng, and Q. Liu, Water Drop Impacts on a Single-layer of Mesh Screen Membrane: Effect of Water Hammer Pressure and Advancing Contact Angles, Exp. Therm. Fluid Sci., vol. 82, pp. 83–93, 2017.
   Web of Science ®Google Scholar
• J. Xie, J. L. Xu, X. T. He, and Q. Liu, Large Scale Generation of Micro-droplet Array by Vapor Condensation on Mesh Screen Piece, Sci. Rep., vol. 7, 2017.
   Web of Science ®Google Scholar
• P. W. Deshmukh, S. V. Prabhu, and R. P. Vedula, Heat Transfer Enhancement for Laminar Flow in Tubes using Curved Delta Wing Vortex Generator Inserts, Appl. Therm. Eng., vol. 106, pp. 1415–1426, 2016.
   Web of Science ®Google Scholar
• Fluent Inc., Fluent 15.0 User’s Guide, pp. 404–405, 2013.
   Google Scholar
• K. V. Sharp and R. J. Adrian, Transition from Laminar to Turbulent Flow in Liquid Filled Microtubes, Exp. Fluids, vol. 36, no. 5, pp. 741–747, 2004.
   Web of Science ®Google Scholar
• S. V. Patankar, C. H. Liu, and E. M. Sparrow, Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-periodic Variations of Cross-sectional Area, ASME J. Heat Transfer, vol. 99, no. 2, pp. 180–186, 1977.
   Web of Science ®Google Scholar
• S. Sripattanapipat and P. Promvonge, Numerical Analysis of Laminar Heat Transfer in a Channel with Diamond-shaped Baffles, Int. Commun. Heat Mass, vol. 36, no. 1, pp. 32–38, 2009.
   Web of Science ®Google Scholar
• H. H. Xia, G. H. Tang, Y. Shi, and W. Q. Tao, Simulation of Heat Transfer Enhancement by Longitudinal Vortex Generators in Dimple Heat Exchangers, Energy, vol. 74, pp. 27–36, 2014.
   Web of Science ®Google Scholar