Turbulent flow characteristics and heat transfer enhancement in a rectangular channel with elliptical cylinders and protrusions of various heights

References

• J. C. Han, “Turbine blade cooling studies at Texas A&M University: 1980–2004,” AIAA J. Thermophys. Heat Transfer, vol. 20, pp. 161–187, 2006. DOI: 10.2514/1.15403
   Web of Science ®Google Scholar
• P. M. Ligrani, M. M. Oliverira, and T. Blaskovich, “Comparison of heat transfer augmentation techniques,” AIAA J., vol. 41, pp. 337–362, 2003. DOI: 10.2514/2.1964
   Google Scholar
• E. M. Sparrow and J. W. Ramsey, “Heat transfer and pressure drop for a staggered wall-attached array of cylinders with tip clearance,” Int. J. Heat Mass Transfer, vol. 21, pp. 1369–1377, 1987. DOI: 10.1016/0017-9310(78)90200-4
   Web of Science ®Google Scholar
• O. N. Sara, S. Yapici, and M. Yilmaz, “Second low analysis of rectangular channels with square pin-fins,” Int. Commun. Heat Mass Transfer, vol. 28, pp. 617–630, 2001.
   Web of Science ®Google Scholar
• N. Sahiti, A. Lemouedda, D. Stojkovic, F. Durst, and E. Franz, “Performance comparison of pin fin in-duct flow arrays with various pin cross-sections,” Appl. Therm. Eng., vol. 26, pp. 1176–1192, 2006. DOI: 10.1016/j.applthermaleng.2005.10.042
   Web of Science ®Google Scholar
• T. Giovanni, “Heat transfer and pressure drop in a rectangular channel with diamond-shaped elements,” Int. J. Heat Mass Transfer, vol. 44, pp. 3529–3541, 2001. DOI: 10.1016/s0017-9310(01)00018-7
   Web of Science ®Google Scholar
• F. Wang, J. Zhang, and S. Wang, “Investigation on flow and heat transfer characteristics in rectangular channel with drop-shaped pin fins,” Propul. Power Res., vol. 1, pp. 64–70, 2012. DOI: 10.1016/j.jppr.2012.10.003
   Google Scholar
• P. Li and K. Y. Kim, “Multiobjective optimization of staggered elliptical pin-fin arrays,” Numer. Heat Transfer, Part A, vol. 53, pp. 418–431, 2008. DOI: 10.1080/10407780701632759
   Web of Science ®Google Scholar
• Q. Li, Z. Chen, U. Flechtner, and H. J. Warnecke, “Heat transfer and pressure drop characteristics in rectangular channels with elliptic pin fins,” Int. J. Heat Fluid Flow, vol. 19, pp. 245–250, 1998. DOI: 10.1016/s0142-727x(98)00003-4
   Web of Science ®Google Scholar
• D. E. Metzger, R. A. Berry, and J. P. Bronson, “Developing heat transfer in rectangular ducts with staggered arrays of short pin fins,” ASME J. Heat Transfer, vol. 104, pp. 700–706, 1982. DOI: 10.1115/1.3245188
   Web of Science ®Google Scholar
• M. K. Chyu, Y. C. Hsing, and V. Natarajan, “Convective heat transfer of cubic pin fin arrays in a narrow channel,” ASME J. Turbomach., vol. 120, pp. 362–367, 1996. DOI: 10.1115/1.2841414
   Web of Science ®Google Scholar
• Q. Uzol and C. Camci, “ Elliptical pin fins as an alternative to circular pin fins for gas turbine blade cooling applications, part I: Endwall heat transfer and total pressure loss characteristics,” ASME Turbo Expo 2001: Power for Land, Sea, and Air, New Orleans, Louisiana, June 4–7, 2001, Paper No. 2001-GT-0180.
   Google Scholar
• Z. Chen, Q. Li, D. Meier, and H. J. Warnecke, “Convective heat transfer and pressure loss in rectangular ducts with drop-shaped pin fins,” Int. J. Heat Mass Transfer, vol. 33, pp. 219–224, 1997. DOI: 10.1007/s002310050181
   Web of Science ®Google Scholar
• M. K. Chyu, Y. C. Hsing, T. I. P. Shih, and V. Natarajan, “Heat transfer contributions of pins and endwall in pin-fin arrays: Effects of thermal boundary condition modeling,” ASME J. Turbomach., vol. 121, pp. 257–263, 1999. DOI: 10.1115/1.2841309
   Web of Science ®Google Scholar
• Y. Rao, Y. Xu, and C. Wan, “A numerical study of the flow and heat transfer in the pin fin-dimple channels with various dimple depths,” ASME J. Heat Transfer, vol. 134, p. 071902, 2012. DOI: 10.1115/1.4006098
   Web of Science ®Google Scholar
• Y. Rao, C. Wan, Y. Xu, and S. Zang, “Spatially-resolved heat transfer characteristics in channels with pin fin and pin fin-dimple arrays,” Int. J. Therm. Sci., vol. 50, pp. 2277–2289, 2011. DOI: 10.1016/j.ijthermalsci.2011.06.013
   Web of Science ®Google Scholar
• Y. Rao, C. Wan, and S. Zang, “ Comparisons of flow friction and heat transfer performance in rectangular channels with pin fin-dimple, pin fin and dimple arrays,” ASME Turbo Expo 2010: Power for Land, Sea, and Air, Glasgow, UK, June 14–18, 2010, Paper No. GT2010-22442.
   Google Scholar
• M. A. Elyyan, A. Rozati, and D. K. Tafti, “Investigation of dimpled fins for heat transfer enhancement in compact heat exchangers,” Int. J. Heat Mass Transfer, vol. 51, pp. 2950–2966, 2008. DOI: 10.1016/j.ijheatmasstransfer.2007.09.013
   Web of Science ®Google Scholar
• O. Alshroof, J. Reizes, V. Timchenko, and E. Leonardi, “ Flow structure and heat transfer enhancement in laminar flow with protrusions dimple combinations in a shallow rectangular channel,” ASME 2009 Heat Transfer Summer Conference Collocated with the InterPACK09 and 3rd Energy Sustainability Conferences, San Francisco, CA, July 19–23, 2009, Paper No. HT2009-88251.
   Google Scholar
• J. Liu, Y. Song, G. Xie, and B. Sunden, “Numerical modeling flow and heat transfer in dimpled cooling channels with secondary hemispherical protrusions,” Energy, vol. 79, pp. 1–19, 2015. DOI: 10.1016/j.energy.2014.05.075
   Web of Science ®Google Scholar
• S. D. Hwang, H. G. Kown, and H. H. Cho, “Local heat transfer and thermal performance on periodically dimple-protrusion patterned walls for compact heat exchangers,” Energy, vol. 35, pp. 5357–5364, 2010. DOI: 10.1016/j.energy.2010.07.022
   Web of Science ®Google Scholar
• S. D. Hwang, H. G. Kown, and H. H. Cho, “Heat transfer with dimple/protrusion arrays in a rectangular duct with a low Reynolds number range,” Int. J. Heat Fluid Flow, vol. 29, pp. 16–26, 2008. DOI: 10.1016/j.ijheatfluidflow.2008.01.004
   Web of Science ®Google Scholar
• J. Lee and L. S. Lee, “Correlations and shape optimization in a channel with aligned dimples and protrusions,” Int. J. Heat Mass Transfer, vol. 64, pp. 444–451, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.04.055
   Web of Science ®Google Scholar
• Y. Xie, H. Qu, and D. Zhang, “Numerical investigation of flow and heat transfer in rectangular channel with teardrop dimple/protrusion,” Int. J. Heat Mass Transfer, vol. 84, pp. 486–49, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.055
   Web of Science ®Google Scholar
• M. A. Elyyan and D. K. Tafti, “Effect of Coriolis forces in a rotating channel with dimples and protrusions,” Int. J. Heat Fluid Flow, vol. 31, pp. 1–18, 2010. DOI: 10.1016/j.ijheatfluidflow.2009.10.002
   Web of Science ®Google Scholar
• G. Xie, J. Liu, W. Zhang, G. Lorenzini, and C. Biserni, “Numerical prediction of flow structure and heat transfer in square channels with dimples combined with secondary half-size dimples/protrusions,” Numer. Heat Transfer, Part A, vol. 65, pp. 327–356, 2014. DOI: 10.1080/10407782.2013.832073
   Web of Science ®Google Scholar
• D. Zhang, Q. Jing, Y. Xie, and Z. Shen, “Numerical prediction on turbine blade internal tip cooling with pin-fin and dimple/protrusion structures,” Numer. Heat Transfer, Part A, vol. 70, pp. 1021–1040, 2016. DOI: 10.1080/10407782.2016.1214515
   Web of Science ®Google Scholar
• L. Luo, C. Wang, L. Wang, B. Sunden, and S. Wang, “Heat transfer and friction factor performance in a pin fin wedge duct with different dimple arrangements,” Numer. Heat Transfer, Part A, vol. 69, pp. 209–226, 2016. DOI: 10.1080/10407782.2015.1052301
   Web of Science ®Google Scholar