Analysis of nanofluid transport through a wavy channel

References

• K. Stone and S. P. Vannka, Review of Literature on Heat Transfer Enhancement in Compact Heat Exchangers, Air Conditioning and Refrigeration Center, University of Illinois, Urbana, Illinois, 1996.
   Google Scholar
• U. S. Choi, “Enhancing thermal conductivity of fluids with nano-particles,” ASME Fluids Eng. Div., vol. 231, pp. 99–103, 1995.
   Google Scholar
• Y. Xuan and Q. Li, “Heat transfer enhancement of nanofluids,” Int. J. Heat Fluid Flow, vol. 21, pp. 58–64, 2000. DOI: 10.1016/s0142-727x(99)00067-3.
   Web of Science ®Google Scholar
• W. Duangthongsuk and S. Wongwises, “Measurement of temperature-dependent thermal conductivity and viscosity of TiO2-water nanofluids,” Exp. Therm. Fluid Sci., vol. 33, pp. 706–714, 2009. DOI: 10.1016/j.expthermflusci.2009.01.005.
   Web of Science ®Google Scholar
• R. S. Vajjha and D. K. Das, “Experimental determination of thermal conductivity of three nanofluids and development of new correlations,” Int. J. Heat Mass Transfer, vol. 52, pp. 4675–4682, 2009. DOI: 10.1016/j.ijheatmasstransfer.2009.06.027.
   Web of Science ®Google Scholar
• S. O. Zerinc, S. Kakac, and A. G. Yazicioglu, “Enhanced thermal conductivity of nanofluids: a state-of-the-art review,” Microfluid Nanofluid, vol. 8, pp. 145–170, 2010.
   Web of Science ®Google Scholar
• R. S. Khedkar, S. S. Sonawane, and K. L. Wasewa, “Influence of CuO nanoparticles in enhancing the thermal conductivity of water and monoethylene glycol based nanofluids,” Int. Commun. Heat Mass Transfer, vol. 39, pp. 665–669, 2012. DOI: 10.1016/j.icheatmasstransfer.2012.03.012.
   Web of Science ®Google Scholar
• B. L. Dehkordi et al., “Investigation of viscosity and thermal conductivity of alumina nanofluids with addition of SDBS,” Heat Mass Transfer, vol. 49, pp. 1109–1115, 2013.
   Web of Science ®Google Scholar
• L. S. Sundar, E. V. Ramana, M. K. Singh, and A. C. M. Sousa, “Thermal conductivity and viscosity of stabilized ethylene glycol and water mixture Al203 nanofluids for heat transfer applications: An experimental study,” Int. Commun. Heat Mass Transfer, vol. 56, pp. 86–95, 2014. DOI: 10.1016/j.icheatmasstransfer.2014.06.009.
   Web of Science ®Google Scholar
• K. Khanafer, F. Tavakkoli, K. Vafai, and A. AlAmiri, “A critical investigation of the anomalous behavior of molten salt-based nanofluids,” Int. Commun. Heat Mass Transfer, vol. 69, pp. 51–58, 2015. DOI: 10.1016/j.icheatmasstransfer.2015.10.002.
   Web of Science ®Google Scholar
• K. Khanafer and K. Vafai, “A critical synthesis of thermophysical characteristics of nanofluids,” Int. J. Heat Mass Transfer, vol. 54, pp. 4410–4428, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.04.048.
   Web of Science ®Google Scholar
• M. H. K. Darvanjooghi and M. N. Esfahany, “Experimental investigation of the effect of nanoparticle size on thermal conductivity of in-situ prepared silica–ethanol nanofluid,” Int. Commun. Heat Mass Transfer, vol. 77, pp. 148–154, 2016. DOI: 10.1016/j.icheatmasstransfer.2016.08.001.
   Web of Science ®Google Scholar
• M. Shafahi, V. Bianco, K. Vafai, and O. Manca, “An investigation of the thermal performance of cylindrical heat pipes using nanofluid,” Int. J. Heat Mass Transfer, vol. 53, pp. 376–383, 2010. DOI: 10.1016/j.ijheatmasstransfer.2009.09.019.
   Web of Science ®Google Scholar
• M. Shafahi, V. Bianco, K. Vafai, and O. Manca, “Thermal performance of flat-shaped heat pipes using nanofluids,” Int. J. Heat Mass Transfer, vol. 53, pp. 1438–1445, 2010. DOI: 10.1016/j.ijheatmasstransfer.2009.12.007.
   Web of Science ®Google Scholar
• Z. H. Liu, Y. Y. Li, and R. Bao, “Compositive effect of nanoparticle parameter on thermal performance of cylindrical micro-grooved heat pipe using nanofluids,” Int. J. Therm. Sci. vol. 50, pp. 558–568, 2011. DOI: 10.1016/j.ijthermalsci.2010.11.013.
   Google Scholar
• K. Alizad, K. Vafai, and M. Shafahi, “Thermal performance and operational attributes of the startup characteristics of flat-shaped heat pipes using nanofluids,” Int. J. Heat Mass Transfer, vol. 55, pp. 140–155, 2012. DOI: 10.1016/j.ijheatmasstransfer.2011.08.050.
   Web of Science ®Google Scholar
• G. Kumaresan, S. Venkatachalapathy, L. G. Asirvatham, and S. Wongwises, “Comparative study on heat transfer characteristics of sintered and mesh wick heat pipes using CuO nanofluids,” Int. Commun. Heat Mass Transfer, vol. 57, pp. 208–215, 2014. DOI: 10.1016/j.icheatmasstransfer.2014.08.001.
   Web of Science ®Google Scholar
• N. T. R. Kumar et al., “Heat transfer, friction factor and effectiveness analysis of nanofluid flow in a double pipe heat exchanger with return bend,” Int. Commun. Heat Mass Transfer, vol. 81, pp. 155–163, 2017.
   Web of Science ®Google Scholar
• M. Ghanbarpour, R. Khodabandeh, and K. Vafai, “An investigation of thermal performance improvement of a cylindrical heat pipe using nanofluid,” Heat Mass Transfer vol. 53, pp. 973–983, 2016. DOI: 10.1007/s00231-016-1871-9.
   Web of Science ®Google Scholar
• A. Albojamal and K. Vafai, “Analysis of single phase, discrete and mixture models, in predicting nanofluid transport,” Int. J. Heat Mass Transfer, vol. 114, pp. 225–237, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.06.030.
   Web of Science ®Google Scholar
• M. Akbari, N. Galanis, and A. Behzadmehr, “Comparative analysis of single and two phase models for CFD studies of nanofluid heat transfer,” Int. J. Therm. Sci. vol. 50, pp. 1343–1354, 2011. DOI: 10.1016/j.ijthermalsci.2011.03.008.
   Web of Science ®Google Scholar
• K. Stone and S. P. Vanka, “Numerical study of developing flow and heat transfer in a wavy passage,” J. Fluids Eng., vol. 121, pp. 713–719, 1999. DOI: 10.1115/1.2823528.
   Web of Science ®Google Scholar
• H. M. S. Bahaidarah, N. K. Anand, and H. C. Chen, “Numerical study of heat and momentum transfer in channels with wavy walls,” Numer. Heat Transfer, Part A, vol. 47, pp. 417–439, 2005. DOI: 10.1080/10407780590891218.
   Web of Science ®Google Scholar
• K. Nilpueng and S. Wongwises, “Flow pattern and pressure drop of vertical upward gas–liquid flow in sinusoidal wavy channels,” Exp. Therm. Fluid Sci., vol. 30, pp. 523–534, 2006. DOI: 10.1016/j.expthermflusci.2005.10.004.
   Web of Science ®Google Scholar
• P. Naphon, “Effect of wavy plate geometry configurations on the temperature and flow distributions,” Int. Commun. Heat Mass Transfer, vol. 36, pp. 942–946, 2009. DOI: 10.1016/j.icheatmasstransfer.2009.05.007.
   Web of Science ®Google Scholar
• T. A. Rush, T. A. Newell, and A. M. Jacobi, “An experimental study of flow and heat transfer in sinusoidal wavy passages,” Int. J. Heat Mass Transfer, vol. 42, pp. 1541–1553, 1999. DOI: 10.1016/s0017-9310(98)00264-6.
   Web of Science ®Google Scholar
• H. Heidary and M. J. Kermani, “Effect of nano-particles on forced convection in sinusoidal-wall channel,” Int. J. Heat Mass Transfer, vol. 37, pp. 1520–1527, 2010. DOI: 10.1016/j.icheatmasstransfer.2010.08.018.
   Google Scholar
• M. A. Ahmed, N. H. Shuaib, and M. Z. Yusoff, “Numerical investigations on the heat transfer enhancement in a wavy channel using nanofluid,” Int. J. Heat Mass Transfer, vol. 55, pp. 5891–5898, 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.05.086.
   Web of Science ®Google Scholar
• Y. T. Yang, Y. H. Wang, and P. K. Tseng, “Numerical optimization of heat transfer enhancement in a wavy channel using nanofluids,” Int. J. Heat Mass Transfer, vol. 51, pp. 9–17, 2013. DOI: 10.1016/j.icheatmasstransfer.2013.12.002.
   Google Scholar
• M. M. Rashidi, A. Hosseini, I. Pop, S. Kumar, and N. Freidoonimehr, “Comparative numerical study of single and two phase models of nanofluid heat transfer in wavy channel,” Appl. Math. Mech., vol. 35, pp. 831–848, 2014. DOI: 10.1007/s10483-014-1839-9.
   Google Scholar
• U. Akdag, S. Akcay, and D. Demiral, “Heat transfer enhancement with laminar pulsating nanofluid flow in a wavy channel,” Int. J. Heat Mass Transfer, vol. 59, pp. 17–23, 2014. DOI: 10.1016/j.icheatmasstransfer.2014.10.008.
   Google Scholar
• N. Shehzad, A. Zeeshan, R. Ellahi, and K. Vafai, “Convective heat transfer of nanofluid in a wavy channel: BuongiornO’s mathematical model,” J. Mol. Liq., vol. 222, pp. 446–455, 2016. DOI: 10.1016/j.molliq.2016.07.052.
   Web of Science ®Google Scholar
• ANSYS® Academic Research, Release 18.0, 2016.
   Google Scholar
• M. S. Mojarrad, A. Keshavarz, and A. Shokouhi, “Nanofluids thermal behavior analysis using a new dispersion model along with single phase,” Heat Mass Transfer, vol. 49, pp. 1333–1343, 2013. DOI: 10.1007/s00231-013-1182-3.
   Web of Science ®Google Scholar
• S. Zeinali Heris, M. Nasr Esfahany, and G. Etemad, “Numerical investigation of nanofluid laminar convective heat transfer through a circular tube,” Numer. Heat Transfer, Part A, vol. 52, pp. 1043–1058, 2007. DOI: 10.1080/10407780701364411.
   Web of Science ®Google Scholar
• C. C. Wang, and C. K. Chen, “Forced convection in a wavy-wall channel,” Int. J. Heat Mass Transfer, vol. 45, pp. 2587–2595, 2002. DOI: 10.1016/s0017-9310(01)00335-0.
   Web of Science ®Google Scholar
• H. K. Versteeg and W. Malalasekera, An introduction to Computational Fluid Dynamics the Finite Volume Method, 2nd ed. England: Longman Scientific and Technical, 2007.
   Google Scholar
• S. E. B. Maïga, S. J. Palm, C. T. Nguyen, G. Roy, and N. Galanis, “Heat transfer enhancement by using nanofluids in forced convection flows,” Int. J. Heat Fluid Flow, vol. 26, no. 4, pp. 530–546, 2005. DOI: 10.1016/j.ijheatfluidflow.2005.02.004.
   Web of Science ®Google Scholar
• C. T. Nguyen et al., “Temperature and particle-size dependent viscosity data for water-based nanofluids – hysteresis phenomenon,” Int. J. Heat Fluid Flow, vol. 28, no. 6, pp. 1492–1506, 2007. DOI: 10.1016/j.ijheatfluidflow.2007.02.004.
   Web of Science ®Google Scholar
• M. Corcione, “Empirical correlating equations for predicting the effective thermal conductivity and dynamic viscosity of nanofluids,” Energy Convers. Manage. vol. 52, pp. 789–793, 2011. DOI: 10.1016/j.enconman.2010.06.072.
   Web of Science ®Google Scholar
• S. M. Vanaki, P. Ganesan, and H. A. Mohammed, “Numerical study of convective heat transfer of nanofluids: a review,” Renewable Sustainable Energy Rev., vol. 54, pp. 1212–1239, 2016. DOI: 10.1016/j.rser.2015.10.042.
   Web of Science ®Google Scholar
• A. Mokmeli and M. Saffar-Avval, Prediction of nanofluid convective heat transfer using the dispersion model. Int. J. Therm. Sci. vol. 49, pp. 471–478, 2010. DOI: 10.1016/j.ijthermalsci.2009.09.005.
   Web of Science ®Google Scholar
• A. Li and G. Ahmadi, “Dispersion and deposition of spherical particles from point sources in a turbulent channel flow,” Aerosol Sci. Technol., vol. 16, no. 4, pp. 209–226, 1992. DOI: 10.1080/02786829208959550.
   Web of Science ®Google Scholar
• W. J. Minkowycz, E. M. Sparrow, and J. Y. Murthy. Handbook of numerical heat transfer, 2nd ed. Chichester: John Wiley & Sons, 2006.
   Google Scholar
• M. Manninen, V. Taivassalo, and S. Kallio, “On the mixture model for multiphase flow,” VTT Publ., vol. 288, pp. 3–67.
   Google Scholar
• L. Schiller and A. Naumann, “A drag coefficient correlation,” Z. Ver. Deutsch. Ing. vol. 77, pp. 318–320, 1935.
   Google Scholar
• V. Bianco, F. Chiacchio, O. Manca, and S. Nardini, “Numerical investigation of nanofluids forced convection in circular tubes,” Appl. Therm. Eng., vol. 29, nos. 17–18, pp. 3632–3642, 2009. DOI: 10.1016/j.applthermaleng.2009.06.019.
   Web of Science ®Google Scholar