References
- Centre for the Promotion of Imports, CBI Product Factsheet: Heat Exchangers in Europe. The Hague: The Netherlands Ministry of Foreign Affairs, 2016.
- T. Alam, R. P. Saini, and J. S. Saini, “Heat and flow characteristics of air heater ducts provided with turbulators – A review,” Renew. Sustain. Energy Rev., vol. 31, pp. 289–304, 2014.
- J. Ortega-Casanova and F. Molina-Gonzalez, “Axisymmetric numerical investigation of the heat transfer enhancement from a heated plate to an impinging turbulent axial jet via small vortex generators,” Int. J. Heat Mass Transf., vol. 106, pp. 183–194, 2017.
- Y. Lei, F. Zheng, C. Song, and Y. Lyu, “Improving the thermal hydraulic performance of a circular tube by using punched delta-winglet vortex generators,” Int. J. Heat Mass Transf., vol. 111, pp. 299–311, 2017.
- S. Sripattanapipat and P. Promvonge, “Numerical analysis of laminar heat transfer in a channel with diamond-shaped baffles,” Int. Commun. Heat Mass Transf., vol. 36, no. 1, pp. 32–38, 2009.
- M. H. Yang, R. H. Yeh, and J. J. Hwang, “Forced convective cooling of a fin in a channel,” Energy Convers. Management, vol. 51, no. 6, pp. 1277–1286, 2010.
- S. Eiamsa-ard, S. Pattanapipat, and P. Promvonge, “Influence of triangular wavy baffles on heat and fluid flow characteristics in a channel,” J. Mech. Sci. Technol., vol. 27, no. 7, pp. 2199–2208, 2013.
- R. Saim, H. Benzenine, H. F. Öztop, and K. Al-Salem, “Turbulent flow and heat transfer enhancement of forced convection over heated baffles in a channel,” Int. J. Numer. Meth. Heat Fluid Flow, vol. 23, no. 4, pp. 613–633, 2013.
- R. Saim, R. Bouchenafa, H. Benzenine, H. F. Öztop, K. Al-Salem, and S. Abboudi, “A computational work on turbulent flow and heat transfer in a channel fitted with inclined baffles,” Heat Mass Transf., vol. 49, no. 6, pp. 761–774, 2013.
- C. Nuntadusit, I. Piya, M. Wae-hayee, and S. Eiamsa-ard, “Heat transfer characteristics in a channel fitted with zigzag-cut baffles,” J. Mech. Sci. Technol., vol. 29, no. 6, pp. 2547–2554, 2015.
- K. Nanan, N. Piriyarungrod, C. Thianpong, K. Wongcharee, and S. Eiamsaard, “Numerical and experimental investigations of heat transfer enhancement in circular tubes with transverse twistedbaffles,” Heat Mass Transf., vol. 52, no. 10, pp. 2177–2192, 2016.
- Z. Li and Y. Gao, “Numerical study of turbulent flow and heat transfer in cross-corrugated triangular ducts with delta-shaped baffles,” Int. J. Heat Mass Tranf., vol. 108, pp. 658–670, 2017.
- D. Sahel, H. Ameur, R. Benzeguir, and Y. Kamla, “Enhancement of heat transfer in a rectangular channel with perforated baffles,” Appl. Therm. Eng., vol. 101, pp. 156–164, 2016.
- D. C. Wilcox, Turbulence Modeling for CFD, 3rd ed. La Cañada: DCW Industries, 2008.
- F. R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications,” AIAA J., vol. 32, no.8, pp. 1598–1605, 1994.
- Journal of Turbulence. Taylor & Francis: Oxford.
- J. Ahn, E. M. Sparrow, J. M. Gorman, and W. J. Minkowycz, “Investigation of coupled systems consisting of fluid movers and heat-exchange devices,” Numer. Heat Transf. Part A, vol. 70, no. 9, pp. 964–979, 2016.
- Q. Y. Zhao, H. Chung, E. Y. Jung, and H. H. Cho, “Effect of various rib arrangements on heat transfer in a semicylinder channel with effusion flow,” Numer. Heat Transf. Part A, vol. 71, no. 5, pp. 547–559, 2017.
- J. Kim, S. Kline, and J. Johnston, “Investigation of a reattaching turbulent shear layer: Flow over a backward-facing step,” ASME J. Fluids Eng., vol. 102, no. 3, pp. 302–308, 1980.
- N. Mansour, J. Kim, and P. Moin, “Reynolds-stress and dissipation-rate budgets in a turbulent channel flow,” J. Fluid Mech., vol. 194, pp. 15–44, 1988.
- P. S. B. Zdanski, M. Vaz, Jr., and G. T. Gargioni, “Convection heat transfer enhancement on recirculating flows in a backward facing step: The effects of a small square turbulence promoter,” Heat Transf. Eng., vol. 37, no. 2, pp. 162–171, 2016.
- J. C. Vogel and J. K. Eaton, “Combined heat transfer and fluid dynamic measurements downstream of a backward-facing step,” ASME J. Heat Transf., vol. 107, no. 4, pp. 922–929, 1985.
- P. S. B. Zdanski, M. Ortega, and N. G. Fico, “Heat transfer studies in the flow over shallow cavities,” ASME J. Heat Transf., vol. 127, no. 7, pp. 699–712, 2005.
- T. L. Bergman, A. S. Lavine, F. P. Incropera, and D. P. Dewitt, Introduction to Heat Transfer, 6th ed. Hoboken: Wiley, 2011.
- L. H. Perão and M. Vaz, Jr., and P. S. B. Zdanski, “Considerations on heat transfer in parallel-plate channels with staggered fins,” Defect Difus. Forum, vol. 379, pp. 12–23, 2017.
- L. Sheik Ismail, R. Velraj, and C. Ranganayakulu, “Studies on pumping power in terms of pressure drop and heat transfer characteristics of compact plate-fin heat exchangers – A review,” Renew. Sustain. Energy Rev., vol. 14, pp. 478–485, 2010.