Numerical study of the radiation effect on the jet array impinging heat transfer in a feeding pipe

References

• G. Wei, Q. Jian, and C. Xiao, “A review of turbine clearance control system for civil turbofan engine,” Gas Turb. Technol., vol. 26, pp. 1–4, 2003.
   Google Scholar
• R. S. Beitler, A. A. Saunders, and R. P. Wanger, “Fuel conservation through active control of rotor clearance,”AIAA Paper, AIAA, 80–1087, Hartford, CT, USA, 1980.
   Google Scholar
• B. Beck and W. Fasching, “The CF6 jet engine performance improvement – low pressure turbine active clearance control,” NASA Langley Research Center, Hampton, VA, NASA Report, No. CR-165557, 1982.
   Google Scholar
• B. Lattime and B. M. Steinetz, “High-pressure-turbine clearance control systems: Current practices and future directions,” J. Propul. Power, vol. 20, pp. 302–311, 2004. DOI: 10.2514/1.9255.
   Web of Science ®Google Scholar
• C. Knipser and W. S. Horm, “Aircraft engine performance improvement by active clearance control in low pressure turbines,”ASME Paper, GT2009-59301, Orlando, Florida, USA, 2009.
   Google Scholar
• M. Goodro, J. Park, P. Ligrani, M. Fox, and H. K. Moon, “Effects of mach number and Reynolds number on jet array impingement heat transfer,” Int. J. Heat Mass Transfer, vol. 50, pp. 367–380, 2007. DOI: 10.1016/j.ijheatmasstransfer.2006.06.007.
   Web of Science ®Google Scholar
• M. Goodro, J. Park, P. Ligrani, M. Fox, and H. K. Moon, “Separate effects of mach number and reynolds number on jet array impingement heat transfer,” ASME J. Turbomach., vol. 129, pp. 269–280, 2007. DOI: 10.1115/1.2437774.
   Web of Science ®Google Scholar
• M. Goodro, J. Park, P. Ligrani, M. Fox, and H. K. Moon, “Effect of hole spacing on spatially-resolved jet array impingement heat transfer,” Int. J. Heat Mass Transfer, vol. 51, pp. 6243–6253, 2008. DOI: 10.1016/j.ijheatmasstransfer.2008.05.004.
   Web of Science ®Google Scholar
• M. Goodro, J. Park, P. Ligrani, M. Fox, and H. K. Moon, “Effect of temperature ratio on jet array impingement heat transfer,” ASME J. Heat Transfer, vol. 131, p. 012201, 2009. DOI: 10.1115/1.2977546.
   Web of Science ®Google Scholar
• M. Goodro, J. Park, P. Ligrani, M. Fox, and H. K. Moon, “Mach number, Reynolds number, jet spacing variations: Full Array of impinging jets,” AIAA J. Thermophys. Heat Transfer, vol. 24, pp. 133–144, 2010. DOI: 10.2514/1.44029.
   Web of Science ®Google Scholar
• M. Attalla and E. Specht, “Heat transfer characteristics from in-line arrays of free impinging jets,” Heat Mass Transfer, vol. 45, pp. 537–543, 2009. DOI: 10.1007/s00231-008-0452-y.
   Web of Science ®Google Scholar
• J. Y. San and M. D. Lai, “Optimum jet-to-jet spacing of heat transfer for staggered arrays of impinging air jets,” Int. J. Heat Mass Transfer, vol. 44, pp. 3997–4007, 2001. DOI: 10.1016/s0017-9310(01)00043-6.
   Web of Science ®Google Scholar
• J. Y. San, Y. M. Tsou, and Z. C. Chen, “Impingement heat transfer of staggered arrays of air jets confined in a channel,” Int. J. Heat Mass Transfer, vol. 50, pp. 3718–3727, 2007. DOI: 10.1016/j.ijheatmasstransfer.2007.02.027.
   Web of Science ®Google Scholar
• J. Y. San and J. J. Chen, “Effects of jet-to-jet spacing and jet height on heat transfer characteristics of an impinging jet array,” Int. J. Heat Mass Transfer, vol. 71, pp. 8–17, 2014. DOI: 10.1016/j.ijheatmasstransfer.2013.11.079.
   Web of Science ®Google Scholar
• M. Jennerjohn, J. Lee, Z. Ren, P. Ligrani, and Mcquilling, M., “Jet array impingement cooling local Nusselt number variations: Effects of hole array spacing, jet-to-target plate distance, and Reynolds number,” Heat Transfer Res., vol. 47, pp. 119–140, 2015. DOI: 10.1615/heattransres.2015011198.
   Web of Science ®Google Scholar
• S. Kim, K. Kim, S. Kim, and K. Kim, “Part A : Applications Microcooling system with impinging jets and a stalactite structure Microcooling system with impinging jets and a stalactite structure,” Numer. Heat Transfer Part A Appl., vol. 69, pp. 1376–1389, 2016.
   Web of Science ®Google Scholar
• G. M. Carlomagno and A. Ianiro, “Thermo-fluid-dynamics of submerged jets impinging at short nozzle-to-plate distance: A review,” Exp. Therm. Fluid Sci., vol. 58, pp. 15–35, 2014. DOI: 10.1016/j.expthermflusci.2014.06.010.
   Web of Science ®Google Scholar
• B. A. Lindeman and T. A. Shedd, “Comparison of empirical correlations and a two-equation predictive model for heat transfer to arbitrary arrays of single-phase impinging jets,” Int. J. Heat Mass Transfer, vol. 66, pp. 772–780, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.07.049.
   Web of Science ®Google Scholar
• W. Li, J. Ren, J. Hongde, Y. Luan, and P. Ligrani, “Assessment of six turbulence models for modeling and predicting narrow passage flows, part 1: Impingement jets,” Numer. Heat Transfer Part A: Appl., vol. 69, pp. 109–127, 2015. DOI: 10.1080/10407782.2015.1069665.
   Web of Science ®Google Scholar
• N. Uddin, S. O. Neumann, and B. Weigand, “Heat transfer enhancement by velocity field excitation for an impinging round jet,” Numer. Heat Transfer Part A: Appl., vol. 69, pp. 811–824, 2016. DOI: 10.1080/10407782.2015.1090840.
   Web of Science ®Google Scholar
• F. Ahmed, B. Weigand, and K. Meier, “Heat transfer and pressure drop characteristics for a turbine casing impingement cooling system,”ASME Paper, IHTC 14–22817, Washington, DC, USA, 2010.
   Google Scholar
• F. Ahmed, R. Tucholke, B. Weigand, and K. Meier, “Numerical investigation of heat transfer and pressure drop characteristics for different hole geometries of a turbine casing impingement cooling system,”ASME Paper, GT 2011-45251, Vancouver, British Columbia, Canada, 2011.
   Google Scholar
• T. Chen, “Research on flow and heat transfer characteristics in typical structure of turbine tip active clearance control system,”MSc Thesis. Nanjing University of Aeronautics and Astronautics, Nanjing, PR China, 2012.
   Google Scholar
• F. Liu and J. Mao, “Experimental investigations about heat transfer characteristics of irregular impingement jet arrays in typical active clearance control system,”AIAA Paper, AIAA 2015-2406, Dallas, TX, USA, 2015.
   Google Scholar
• J. Zhang, J. Mao, Y. Li, Y. Shen, and H. Lu, “Experiment on heat transfer characteristics inside the casing of high pressure turbine with active clearance control,” J. Aerosp. Power, vol. 29, pp. 298–304, 2014.
   Google Scholar
• R. Da Soghe, C. Bianchini, A. Andreini, B. Facchini, and L. Mazzei, “Heat transfer augmentation due to coolant extraction on the cold side of active clearance control manifolds,” J. Eng. Gas Turbines Power, vol. 138, p. 021507, 2015. DOI: 10.1115/1.4031383.
   Web of Science ®Google Scholar
• A. Andreini, R. Da Soghe, B. Facchini, F. Maiuolo, L. Tarchi, and D. Coutandin, “Experimental and numerical analysis of multiple impingement jet arrays for an active clearance control system,” ASME J. Turbomach., vol. 135, p. 031016, 2013. DOI: 10.1115/1.4007481.
   Web of Science ®Google Scholar
• A. Andreini and R. Da Soghe, “Numerical characterization of aerodynamic losses of jet arrays for gas turbine applications,” J. Eng. Gas Turbines Power, vol. 134, p. 052504, 2012. DOI: 10.1115/1.4005216.
   Web of Science ®Google Scholar
• R. Da Soghe and A. Andreini, “Numerical characterization of pressure drop across the manifold of turbine casing cooling system,” ASME J. Turbomach., vol. 135, pp. 1–9, 2013. DOI: 10.1115/1.4007506.
   Web of Science ®Google Scholar
• R. Da Soghe, B. Facchini, M. Micio, and A. Andreini, “Aerothermal analysis of a turbine casing impingement cooling system,” Int. J. Rotating Mach., vol. 2012. p. 103583, 2012. DOI: 10.1155/2012/103583.
   Google Scholar
• F. R. Menter, R. B. Langtry, S. R. Likki, Y. B. Suzen, P. G. Huang, and S. Volker, “A correlation-based transition model using local variables—Part I: Model formulation,” ASME J. Turbomach., vol. 128, pp. 413–422, 2006. DOI: 10.1115/1.2184352.
   Web of Science ®Google Scholar
• Ansys, “ANSYS CFX-Solver theory guide,” ANSYS CFX Release 16.2, 2013.
   Google Scholar
• R. J. Goldstein and J. F. Timmers, “Visualization of heat transfer from arrays of impinging jets,” Int. J. Heat Mass Transfer, vol. 25, pp. 1857–1868, 1982. DOI: 10.1016/0017-9310(82)90108-9.
   Web of Science ®Google Scholar
• J. R. Howell, “The Monte Carlo method in radiative heat transfer,” J. Heat Transfer, vol. 120, pp. 547–560, 1998. DOI: 10.1115/1.2824310.
   Web of Science ®Google Scholar
• J. P. Hartnett, T. F. Irvine, Y. I. Cho, et al., Radiative Heat Transfer by the Monte Carlo Method. New York: Academic Press, 1995.
   Google Scholar