Entropy generation analysis of fully-developed turbulent heat transfer flow in inward helically corrugated tubes

References

• O. Manca, S. Nardini, and D. Ricci, “Numerical analysis of water forced convection in channels with differently shaped transverse ribs,” J. Appl. Math., vol. 2011, pp. 1–25, 2011. http://dx.doi.org/10.1155/2011/323485
   Web of Science ®Google Scholar
• P. Naphon, M. Nuchjapo, and J. Kurujareon, “Tube side heat transfer coefficient and friction factor characteristics of horizontal tubes with helical rib,” Energ. Convers. Manage., vol. 47, pp. 3031–3044, 2006. https://doi.org/10.1016/j.enconman.2006.03.023
   Web of Science ®Google Scholar
• S. Rozzi et al., “Heat treatment of fluid foods in a shell and tube heat exchanger: comparison between smooth and helically corrugated wall tubes,” J. Food Eng., vol. 79, pp. 249–254, 2007. https://doi.org/10.1016/j.jfoodeng.2006.01.050
   Web of Science ®Google Scholar
• H. A. Mohammed, A. K. Abbas, and J. M. Sheriff, “Influence of geometrical parameters and forced convective heat transfer in transversely corrugated circular tubes,” Int. Commun. Heat Mass Transf., vol. 44, pp. 116–126, 2013. http://dx.doi.org/10.1016/j.icheatmasstransfer.2013.02.005
   Web of Science ®Google Scholar
• A. Harleß, E. Franz, and M. Breuer, “Heat transfer and friction characteristics of fully developed gas flow in cross-corrugated tubes,” Int. J. Heat Mass Transf., vol. 107, pp. 1076–1084, 2017. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2016.10.129
   Web of Science ®Google Scholar
• K. S. Lee, W. S. Kim, and J. M. Si, “Optimal shape and arrangement of staggered pins in the channel of a plate heat exchanger.” Int. J. Heat Mass Transf., vol. 44, pp. 3223–3231, 2001. https://doi.org/10.1016/S0017-9310(00)00350-1
   Web of Science ®Google Scholar
• J. Liu, G. N. Xie, and W. S. Terrence, “Turbulent flow and heat transfer enhancement in rectangular channels with novel cylindrical grooves,” Int. J. Heat Mass Transf., vol. 81, pp. 563–577, 2015. https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.021
   Web of Science ®Google Scholar
• S. Chamoli, P. Yu, and K. Alok, “Multi-response optimization of geometric and flow parameters in a heat exchanger tube with perforated disk inserts by Taguchi grey relational analysis,” Appl. Therm. Eng., vol. 103, pp. 1339–1350, 2016. https://doi.org/10.1016/j.applthermaleng.2016.04.166
   Web of Science ®Google Scholar
• V. Zimparov, “Enhancement of heat transfer by a combination of a single-start spirally corrugated tubes with a twisted tape,” Exp. Therm. Fluid Sci., vol. 25, pp. 535–546, 2002. https://doi.org/10.1016/S0894-1777(01)00112-1
   Web of Science ®Google Scholar
• E. Jalil and Goudarzi K., “Experimental study of heat transfer enhancement in the evaporator of single-effect absorption chiller using new different tube insert,” Appl. Therm. Eng., vol. 128, pp. 1–9, 2018. https://doi.org/10.1016/j.applthermaleng.2017.09.004
   Web of Science ®Google Scholar
• O. E. Ivashnyov and N. N. Smirnov, “Thermal growth of a vapor bubble moving in superheated liquid,” Phys. Fluids, vol. 16, pp. 809–823, 2004. https://doi.org/10.1063/1.1645851
   Web of Science ®Google Scholar
• S. M. Demsky and H. B. Ma, “Thin film evaporation on a curved surface,” Microscale Thermophys. Eng., vol. 8, pp. 285–299, 2004. https://doi.org/10.1080/10893950490477590
   Web of Science ®Google Scholar
• W. Zan, B. Sundén, V. V. Wadekar, and W. Li, “Heat transfer correlations for single-phase flow, condensation, and boiling in microfin tubes,” Heat Transf. Eng., vol. 36, pp. 582–595, 2015. https://doi.org/10.1080/01457632.2014.939531
   Web of Science ®Google Scholar
• P. K. Namburu, D. K. Das, K. M. Tanguturi, and R. S. Vaijha, “Numerical study of turbulent flow and heat transfer characteristics of nanofluids considering variable properties,” Int. J. Therm. Sci., vol. 48, pp. 290–302, 2009. https://doi.org/10.1016/j.ijthermalsci.2008.01.001
   Web of Science ®Google Scholar
• K. Wongcharee and S. Eiamsa-ard, “Heat transfer enhancement by using CuO/water nanofluid in corrugated tube equipped with twisted tape,” Int. Commun. Heat Mass Transf., vol. 39, pp. 251–257, 2012. https://doi.org/10.1016/j.icheatmasstransfer.2011.11.010
   Web of Science ®Google Scholar
• W. Zan and B. Sundén, “Convective heat transfer performance of aggregate-laden nanofludis,” Int. J. Heat Mass Transf., vol. 93, pp. 1107–1115, 2016. https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.032
   Web of Science ®Google Scholar
• H. Sadek, A. J. Robinson, and J. S. Cotton, “Electrohydrodynamic enhancement of in-tube convective condensation heat transfer,” Int. J. Heat Mass Transf., vol. 49, pp. 1647–1657, 2006. https://doi.org/10.1016/j.ijheatmasstransfer.2005.10.030
   Web of Science ®Google Scholar
• F. Zamzari, Z. Mehrez, and A. E. Cafsi, “Numerical investigation of entropy generation and heat transfer of pulsating flow in a horizontal channel with an open cavity,” J. Hydrodyn., vol. 29, pp. 632–646, 2017. https://doi.org/10.1016/S1001-6058(16)60776-X
   Web of Science ®Google Scholar
• R. Azizian et al., “Effect of magnetic field on laminar convective heat transfer of magnetite nanofluids,” Int. J. Heat Mass Transf., vol. 68, pp. 94–109, 2014. https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.011
   Web of Science ®Google Scholar
• X. Su, X. Chen, and J. Liu, “Experimental investigation of forced flow boiling of nitrogen in a horizontal corrugated stainless steel tube,” Cryogenics, vol. 70, pp. 47–56, 2015. https://doi.org/10.1016/j.cryogenics.2015.05.001
   Web of Science ®Google Scholar
• W. Wang, Y. N. Zhang, and B. X. Li, “Influence of geometrical parameters on turbulent flow and heat transfer characteristics in outward helically corrugated tubes,” Energ. Convers. Manage., vol. 135, pp. 294–306, 2017. https://doi.org/10.1016/j.enconman.2017.01.029
   Google Scholar
• J. Liu et al., “Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4:1) with ribs of various truncation types and arrangements,” Int. J. Therm. Sci., vol. 123, pp. 99–115, 2018. https://doi.org/10.1016/j.ijthermalsci.2017.09.013
   Web of Science ®Google Scholar
• G. Xu and Z. B. Zhang, “Experimental investigation of the applied performance of several typical enhanced tubes,” J. Enhanc. Heat Transf., vol. 17, pp. 331–341, 2010. doi:10.1615/JEnhHeatTransf.v17.i4.40
   Web of Science ®Google Scholar
• J. Vicente, A. Garcia, and A. Viedma, “Experimental investigation on heat transfer and frictional characteristics of spirally corrugated tubes in turbulent flow at different Prandtl numbers,” Int. J. Heat Mass Transf., vol. 47, pp. 671–681, 2004. https://doi.org/10.1016/j.ijheatmasstransfer.2003.08.005
   Web of Science ®Google Scholar
• Y. Ji, H. C. Zhang, X. Yang, and L. Shi, “Entropy generation analysis and performance evaluation of turbulent forced convective heat transfer to nanofluids,” Entropy, vol. 19, pp. 1–18, 2017. https://doi.org/10.3390/e19030108
   Web of Science ®Google Scholar
• X. J. Zhu, X. Du, Y. Ding, and Q. Qiu, “Analysis of entropy generation behavior of supercritical water flow in a hexagon rod bundle,” Int. J. Heat Mass Transf., vol. 114, pp. 20–30, 2017. https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.047
   Web of Science ®Google Scholar
• J. A. Esfahani, and P. B. Shahabi, “Effect of non-uniform heating on entropy generation for the laminar developing pipe flow of a high Prandtl number fluid,” Energ. Convers. Manage., vol. 51, pp. 2087–2097, 2010. https://doi.org/10.1016/j.enconman.2010.02.022
   Web of Science ®Google Scholar
• G. Su, H. C. Chen and J. C. Han, “Computation of flow and heat transfer in rotating rectangular channels (AR =4:1) with Pin-Fins by a Reynolds Stress Turbulence Model.” J. Heat Transf., vol. 129, pp. 685–696, 2007. doi:10.1115/1.2717935
   Web of Science ®Google Scholar
• A. Amamou, S. Habli, and N. M. Said, “Numerical study of turbulent round jet in a uniform counterflow using a second order Reynolds Stress Model,” J. Hydro-environ. Res., vol. 9, pp. 482–495, 2015. https://doi.org/10.1016/j.jher.2015.04.004
   Web of Science ®Google Scholar
• J. Zhang, J. He, L. Zhou, and S. Nieh , “Simulation of swirling turbulent heat transfer in a vortex heat exchanger,” Numer. Heat Transf A-Appl., vol. 48, pp. 607–625, 2005. https://doi.org/10.1080/10407780590960031
   Web of Science ®Google Scholar
• Fluent Inc., FLUENT User’s Guide. New Hampshire, USA: Fluent Inc., 2003.
   Google Scholar
• S. Fu, B. E. Launder and M. A. Leschziner, “Modeling strongly swirling recirculating jet flow with Reynolds-stress transport closures.” In Sixth Symposium on Turbulent Shear Flows. Toulouse, France, 1987.
   Google Scholar
• F. S. Lien and M. A. Leschziner, “Assessment of turbulent transport models including non-linear RNG eddy-viscosity formulation and second-moment closure. Comput. Fluids, vol. 23, pp. 983–1004, 1994. https://doi.org/10.1016/0045-7930(94)90001-9
   Web of Science ®Google Scholar
• M. M. Gibson and B. E. Launder, “Ground effects on pressure fluctuations in the atmospheric boundary layer.” J. Fluid Mech., vol. 86, pp. 491–511, 1978. https://doi.org/10.1017/S0022112078001251
   Web of Science ®Google Scholar
• A. Bejan, “A study of entropy generation in fundamental convective heat transfer,” J. Heat Transf., vol. 101, pp. 718–725, 1979. doi:10.1115/1.3451063
   Web of Science ®Google Scholar
• P. Biswal and T. Basak, “Analysis of exergy loss vs heat transfer rate for Rayleigh–Benard convection of various fluids in enclosures with curved walls,” Numer. Heat Transf. A-Appl., vol. 11, pp. 461–476, 1987. https://doi.org/10.1080/10407782.2017.1412223
   Google Scholar
• W. Wang, Y. N. Zhang, and B. X. Li, “Numerical investigation of tube-side fully developed turbulent flow and heat transfer in outward corrugated tubes,” Int. J. Heat Mass Transf., vol. 116, pp. 115–126, 2018. https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.003
   Web of Science ®Google Scholar
• L. Langellotto, O. Manca, and S. Nardini, “Numerical investigation of transient natural convection in air in a convergent vertical channel symmetrically heated at uniform heat flux,” Numer. Heat Transf A-Appl., vol. 51, pp. 1065–1086, 2007. https://doi.org/10.1080/10407790601184355
   Web of Science ®Google Scholar
• S. Pethkool, S. Eiamsa-ard, S. Kwankaomeng, and P. Promvonge, “Turbulent heat transfer enhancement in a heat exchanger using helically corrugated tube.” Int. Commun. Heat Mass Transf., vol. 38, pp. 340–347, 2011. https://doi.org/10.1016/j.icheatmasstransfer.2010.11.014
   Web of Science ®Google Scholar
• V. Ozceyhan, S. Gunes, O. Buyukalaca, and N. Altuntop, “Heat transfer enhancement in a tube using circular cross sectional rings separated from wall,” Appl. Energ., vol. 85, pp. 988–1001, 2008. https://doi.org/10.1016/j.apenergy.2008.02.007
   Web of Science ®Google Scholar
• A. Bejan, “Entropy generation minimization: the new thermodynamics of finite-size devices and finite-time processes,” Appl. Phys., vol. 19, pp. 1191–1218, 1996. https://doi.org/10.1063/1.362674
   Google Scholar
• Z. Cao, Z. Wu, H. Luan, and B. Sundén, “Numerical study on heat transfer enhancement for laminar flow in a tube with mesh conical frustum inserts,” Numer. Heat Transf. A-Appl., vol. 72, pp. 21–39, 2017. https://doi.org/10.1080/10407782.2017.1353386
   Web of Science ®Google Scholar
• G. Xie, Y. Song, and T. W. Simon, “Turbulent flow characteristics and heat transfer enhancement in a rectangular channel with elliptical cylinders and protrusions of various heights,” Numer. Heat Transf. A-Appl., vol. 72, pp. 417–432, 2017. https://doi.org/10.1080/10407782.2017.1386507
   Web of Science ®Google Scholar
• L. Eric, S. Jorge, and L.Sylvain, “Direct numerical simulation of a separation bubble on a rounded finite-width leading edge,” Int. J. Heat Fluid Fl., vol. 29, pp. 612–625, 2008. https://doi.org/10.1016/j.ijheatfluidflow.2008.03.006
   Web of Science ®Google Scholar
• B. E. Launder and D. B. Spalding, “The numerical computation of turbulent flows,” Comput. Method. Appl. Mech. Eng., vol. 3, pp. 269–289, 1974. https://doi.org/10.1016/B978-0-08-030937-8.50016-7
   Google Scholar