References
- I. T. Elperin, “Heat and mass transfer in opposing currents,” J. Eng. Phys., vol. 6, pp. 62–68, 1961.
- L. Lapčík, M. Fraštík and B. Lapčíková, “Impinging jet study of the deposition of colloidal particles on modified polycarbonate and poly(ethylene terephthalate) surfaces,” Int. J. Heat Mass Transf., vol. 55, no. 5–6, pp. 1513–1518, 2012. DOI: 10.1016/j.ijheatmasstransfer.2011.11.002.
- B. K. Johnson and R. K. Prudhomme, “Chemical processing and micromixing in confined impinging jets,” AICHE J., vol. 49, no. 9, pp. 2264–2282, 2003. DOI: 10.1002/aic.690490905.
- K. Choicharoen, S. Devahastin, and S. Soponronnarit, “Performance and energy consumption of an impinging stream dryer for high-moisture particulate materials,” Drying Technol., vol. 28, no. 1, pp. 20–29, 2009. DOI: 10.1080/07373930903423608.
- Y. Berman, A. Tanklevsky, Y. Oren, and A. Tamir, “Modeling and experimental studies of SO2 absorption in coaxial cylinders with impinging streams: part I,” Chem. Eng. Sci., vol. 55, no. 5, pp. 1009–1021, 2000. DOI: 10.1016/S0009-2509(99)00380-2.
- Z. Abraham, K. Luzzatio, and A. Tamir, “Application of free impinging streams to the combustion of gas and pulverized coal,” Combustion Sci. Tech., vol. 60, no. 1–3, pp. 31–44, 1988. DOI: 10.1080/00102208808923974.
- W.-F. Li, T.-L. Yao, H.-F. Liu, and F.-C. Wang, “Experimental investigation of flow regimes of axisymmetric and planar opposed jets,” AIChE J, vol. 57, no. 6, pp. 1434–1445, 2011. DOI: 10.1002/aic.12369.
- K. Choicharoen, S. Devahastin, and S. Soponronnarit, “Numerical simulation of multiphase transport phenomena during impinging stream drying of a particulate material,” Drying Technol., vol. 30, no. 11–12, pp. 1227–1237, 2012. DOI: 10.1080/07373937.2012.704467.
- M. Du, C. Zhao, B. Zhou, H. Guo, and Y. Hao, “A modified DSMC method for simulating gas-particle two-phase impinging streams,” Chem. Eng. Sci., vol. 66, no. 20, pp. 4922–4931, 2011. DOI: 10.1016/j.ces.2011.06.061.
- M. Du, J. Gong, W. Chen, and Q. Wang, “Mathematical model based on DSMC method for particulate drying in a coaxial impinging stream dryer,” Drying Technol., vol. 33, no. 6, pp. 646–658, 2015. DOI: 10.1080/07373937.2014.969841.
- Z. Liu, L. Guo, T. Huang, L. Wen, and J. Chen, “Experimental and CFD studies on the intensified micromixing performance of micro-impinging stream reactors built from commercial T-junctions,” Chem. Eng. Sci., vol. 119, pp. 124–133, 2014. DOI: 10.1016/j.ces.2014.07.061.
- W. J. Sun, W. Q. Zhong, and Y. Zhang, “LES-DPM simulation of turbulent gas-particle flow on opposed round jets,” Powder Technol., vol. 270, pp. 302–311, 2015. DOI: 10.1016/j.powtec.2014.10.039.
- P. Khomwachirakul, S. Devahastin, T. Swasdisevi, and S. Soponronnarit, “Simulation of flow and drying characteristics of high-moisture particles in an impinging stream dryer via CFD-DEM,” Drying Technol., vol. 34, no. 4, pp. 403–419, 2016. DOI: 10.1080/07373937.2015.1081930.
- N. Ghasemi, M. Sohrabi, M. Khosravi, A. S. Mujumdar, and M. Goodarzi, “CFD simulation of solid-liquid flow in a two impinging streams cyclone reactor: prediction of mean residence time and holdup of solid particles,” Chem. Eng. Process., vol. 49, no. 12, pp. 1277–1283, 2010. DOI: 10.1016/j.cep.2010.09.016.
- J. Li et al., “Experimental investigation on turbulence modification in a dilute gas-particle axisymmetric opposed jets flow,” Chem. Eng. J., vol. 286, pp. 76–90, 2016. DOI: 10.1016/j.cej.2015.10.056.
- W. Li, Z. Sun, H. Liu, F. Wang, and Z. Yu, “Experimental and numerical study on stagnation point offset of turbulent opposed jets,” Chem. Eng. J., vol. 138, no. 1–3, pp. 283–294, 2008. DOI: 10.1016/j.cej.2007.05.039.
- J. Zhang, Y. Z. Liu, and G. S. Qi, “Flow characteristics in free impinging jet reactor by particle image velocimetry (PIV) investigation,” Fluid Dyn. Res., vol. 48, no. 4, pp. 1–17, 2016. DOI: 10.1088/0169-5983/48/4/04550.
- J. Zhang, Y. Z. Liu, and Y. Luo, “The turbulent behavior of novel free triple-impinging jets with large jet spacing by means of particle image velocimetry,” Chinese J. Chem. Eng., vol. 24, no. 6, pp. 757–766, 2016. DOI: 10.1016/j.cjche.2016.04.022.
- E. Erkoç, C. P. Fonte, M. M. Dias, J. C. B. Lopes and R. J. Santos, “Numerical study of active mixing over a dynamic flow field in a T-jets mixer—induction of resonance,” Chem. Eng. Res. Des., vol. 106, pp. 74–91, 2016. DOI: 10.1016/j.cherd.2015.12.002.
- W.-F. Li, G.-F. Huang, G.-Y. Tu, H.-F. Liu, and F.-C. Wang, “Experimental study of oscillation of axisymmetric turbulent opposed jets with modulated airflow,” AIChE J., vol. 59, no. 12, pp. 4828–4838, 2013. DOI: 10.1002/aic.14190.
- D. Y. Liu, C. S. Bu, and X. P. Chen, “Development and test of CFD-DEM model for complex geometry: a coupling algorithm for fluent and DEM,” Comput. Chem. Eng., vol. 58, pp. 260–268, 2013. DOI: 10.1016/j.compchemeng.2013.07.006.
- W. Zhong, Y. Xiong, Z. Yuan and M. Zhang, “DEM simulation of gas-solid flow behaviors in spout-fluid bed,” Chem. Eng. Sci., vol. 61, no. 5, pp. 1571–1584, 2006. DOI: 10.1016/j.ces.2005.09.015.
- A. Tamir, Impinging-Stream Reactors: Fundamentals and Applications. Amsterdam: Elsevier, 1994.
- A. Powell, “Aerodynamic noise and the plane boundary,” Acoust. Soc. Am., vol. 32, no. 8, pp. 982–990, 1960. DOI: 10.1121/1.1908347.