Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 73, 2018 - Issue 12
193
Views
5
CrossRef citations to date
0
Altmetric
Original Articles

Numerical study of a three-dimensional forced laminar flow in a channel equipped with a perforated baffle

, , , , &
Pages 881-894 | Received 22 Mar 2018, Accepted 05 Jun 2018, Published online: 25 Jul 2018

References

  • R. Saim, H. Benzenine, H. F. Oztop, and K. Al-Salem, “Heat transfer enhancement of turbulent flow in a channel with diamond shaped baffles,” Prog. Comp. Fluid Dyn. Int. J., vol. 13, no. 6, pp. 397–406, 2013. DOI:10.1504/PCFD.2013.057097.
  • H. Benzenine, R. Saim, S. Abboudi, and O. Imine, “Numerical analysis of a turbulent flow in a channel provided with transversal waved baffles,” Therm Sci., vol. 17, no. 3, pp. 801–812, 2013. DOI:10.2298/TSCI111004099B.
  • M. Nasiruddin and H. S. Kamran, “Heat transfer augmentation in a heat exchanger tube using a baffle,” Int. J. Heat and Fluid Flow, vol. 28, pp. 318–328, 2006. DOI:10.1016/j.ijheatfluidflow.2006.03.020.
  • A. Saber, M. T. Seraji, J. Jonaid, and M. A. Hashib, “Application of CFD for simulation of a baffled tubular membrane,” Chem. Eng. Res. Des., vol. 90, no. 5, pp. 600–608, 2012. DOI:10.1016/j.cherd.2011.08.024.
  • H. Benzenine, R. Saim, S. Abboudi, and O. Imine, “Numerical study on turbulent flow forced convection heat transfer for air in channel with waved fins,” Mechanika, vol. 19, pp. 150–158, 2013. DOI:10.5755/j01.mech.19.2.4154.
  • R. Saim, H. Benzenine, H. F. Oztop, and K. Al-Salem, “Turbulent flow and heat transfer enhancement of forced convection over heated baffles in a channel: effect of pitch of baffles,” Int. J. Num. Meth. Heat Fluid Flow, vol. 23, no. 4, pp. 613–633, 2013. DOI:10.1108/09615531311323773.
  • R. Karwa, B. K. Maheshwari, and N. Karwa, “Experimental study of heat transfer enhancement in an asymmetrically heated rectangular duct with perforated baffles,” Int. Com. Heat Mass Trans., vol. 32, no. 1–2, pp. 275–284, 2005. DOI:10.1016/j.icheatmasstransfer.2004.10.002.
  • R. Karwa and B. K. Maheshwari, “Heat transfer and friction in an asymmetrically heated rectangular duct with half and fully perforated baffles at different pitches,” Int. Com. Heat Mass Trans., vol. 36, no. 3, pp. 264–268, 2009. DOI:10.1016/j.icheatmasstransfer.2008.11.005.
  • P. Dutta and S. Dutta, “Effect of baffle size, perforation, and orientation on internal heat transfer enhancement,” Int. J. Heat Mass Trans., vol. 41, no. 19, pp. 3005–3013, 1998. DOI:10.1016/S0017-9310(98)00016-7.
  • M. R. Shaeri and M. Yaghoubi, “Thermal enhancement from heat sinks by using perforated fins,” Energy Conv. Manage., vol. 50, no. 5, pp. 1264–1270, 2009. DOI:10.1016/j.enconman.2009.01.021.
  • B. K. P. Ary, M. S. Lee, S. W. Ahn, and D. H. Lee, “The effect of the inclined perforated baffle on heat transfer and flow patterns in the channel,” Int. Com. Heat Mass Trans., vol. 39, no. 10, pp. 1578–1583, 2012. DOI:10.1016/j.icheatmasstransfer.2012.10.010.
  • P. Dutta and A. Hossain, “Internal cooling augmentation in rectangular channel using two inclined baffles,” Int. J. Heat Fluid Flow., vol. 26, no. 2, pp. 223–232, 2005. DOI:10.1016/j.ijheatfluidflow.2004.08.001.
  • Y. I. Smulsky, V. I. Terekhov, and N. I. Yarygina, “Heat transfer in turbulent separated flow behind a rib on the surface of square channel at different orientation angles relative to flow direction,” Int. J. Heat Mass Trans., vol. 55, no. 4, pp. 726–733, 2012. DOI:10.1016/j.ijheatmasstransfer.2011.10.037.
  • S. Chamoli, “Hybrid FAHP (fuzzy analytical hierarchy process)-FTOPSIS (fuzzy technique for order preference by similarity of an ideal solution) approach for performance evaluation of the V down perforated baffle roughened rectangular channel,” Energy, vol. 84, pp. 432–442, 2015. DOI:10.1016/j.energy.2015.03.007.
  • M. Sheikholeslami, M. Gorji-Bandpy, and D. D. Ganji, “Experimental study on turbulent flow and heat transfer in an air to water heat exchanger using perforated circular-ring,” Exp. Therm. Fluid Sci., vol. 70, pp. 185–195, 2016. DOI:10.1016/j.expthermflusci.2015.09.002.
  • M. Farhad-Ismail, M. O. Reza, M. A. Zobaer, and M. Ali, “Numerical investigation of turbulent heat convection from solid and longitudinally perforated rectangular fins,” Proc. Eng., vol. 56, pp. 497–502, 2013. DOI:10.1016/j.proeng.2013.03.152.
  • R. Karwa and B. K. Maheshwari, “Heat transfer and friction in an asymmetrically heated rectangular duct with half and fully perforated baffles at different pitches,” Int. Com. Heat Mass Trans., vol. 36, no. 3, pp. 264–268, 2009. DOI:10.1016/j.icheatmasstransfer.2008.11.005.
  • K. D. Huang, S. C. Tzeng, T. M. Jeng, J. R. Wang, S. Y. Cheng, and K. T. Tseng, “Experimental study of fluid flow and heat transfer characteristics in the square channel with a perforation baffle,” Int. Com. Heat Mass Trans., vol. 35, no. 9, pp. 1106–1112, 2008. DOI:10.1016/j.icheatmasstransfer.2008.07.013.
  • A. Tandiroglu, ” “Effect of flow geometry parameters on transient heat transfer for turbulent flow in a circular tube with baffle inserts,” Int. J. Heat Mass Trans., vol. 49, no. 9-10, pp. 1559–1567, 2006. DOI:10.1016/j.ijheatmasstransfer.2006.01.018.
  • A. Tandiroglu, “Effect of flow geometry parameters on transient entropy generation for turbulent flow in circular tube with baffle inserts,” Energy Conv. Manage., vol. 48, no. 3, pp. 898–906, 2007. DOI:10.1016/j.enconman.2006.08.022.
  • A. Tandiroglu and A. Teoman, “Energy dissipation analysis of transient heat transfer for turbulent flow in a circular tube with baffle inserts,” App. Therm. Eng., vol. 26, no. 2-3, pp. 178–185, 2006. DOI:10.1016/j.applthermaleng.2005.05.018.
  • S. Chamoli, “Preference selection index approach for optimization of V down perforated baffled roughened rectangular channel,” Energy, vol. 93, pp. 1418–1425, 2015. DOI:10.1016/j.energy.2015.09.125.
  • K. Boukhadia, H. Ameur, D. Sahel, and M. Bozit, “Effect of the perforation design on the fluid flow and heat transfer characteristics of a plate fin heat exchanger,” Int. J. Therm. Sci., vol. 126, pp. 172–180, 2018. DOI:10.1016/j.ijthermalsci.2017.12.025.
  • M. R. Salem, M. K. Althafeeri, K. M. Elshazly, M. G. Higazy, and M. F. Abdrabbo, “Experimental investigation on the thermal performance of a double pipe heat exchanger with segmental perforated baffles,” Int. J. Therm. Sci., vol. 122, pp. 39–52, 2017. DOI:10.1016/j.ijthermalsci.2017.08.008.
  • A. Kumar and M. Kim, “Heat transfer and fluid flow characteristics in air duct with various V-pattern rib roughness on the heated plate: a comparative study,” Energy, vol. 103, pp. 75–85, 2016. DOI:10.1016/j.energy.2016.02.149.
  • D. Sahel, H. Ameur, R. Benzeguir, and Y. Kamlaa, “Enhancement of heat transfer in a rectangular channel with perforated baffles,” Appl. Therm. Eng., vol. 101, pp. 156–164, 2016. DOI:10.1016/j.applthermaleng.2016.02.136.
  • S. Rouvreau, L. David, D. Calluaud, and P. Joulain, “Laminar junction flow at low Reynolds number: influence of the upstream region on the comparison between experiments and calculations,” C. R. Mécanique, vol. 333, no. 3, pp. 265–272, 2005. DOI:10.1016/j.crme.2004.11.010.
  • S. V. Patankar, Numerical Heat Transfer and Fluid Flow, New York: Hemisphere, 1980.
  • S. V. Patankar and D. B. Spalding, “A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows,” Int. J. Heat Mass Trans., vol. 15, no. 10, pp. 1787–1806, 1972. DOI:10.1016/0017-9310(72)90054-3.
  • N. S. Gibanov, M. A. Sheremet, H. F. Oztop, and O. K. Nusier, “Convective heat transfer of ferrofluid in a lid-driven cavity with a heat-conducting solid backward step under the effect of a variable magnetic field,” Num. Heat Trans. A Appl., vol. 72, no. 1, pp. 54–67, 2017. DOI:10.1080/10407782.2017.1353377.
  • W. Hassen, H. F. Oztop, L. Kolsi, M. N. Borjini, and N. Abu-Hamdeh, “Analysis of the electro-thermo-convection induced by a strong unipolar injection between two concentric or eccentric cylinders,” Num. Heat Trans. A Appl., vol. 71, no. 7, pp. 789–804, 2017. DOI:10.1080/10407782.2017.1308725.
  • S. Kumar and S. Vengadesan, “Control of separated fluid flow and heat transfer characteristics over a backward facing step,” Num. Heat Trans. A Appl., vol. 73, no. 6, pp. 366–384, 2018. DOI:10.1080/10407782.2018.1447197.
  • D. Chiappini, A. Festuccia, and G. Bella, “Coupled lattice boltzmann finite volume method for conjugate heat transfer in porous media,” Num. Heat Trans. A Appl., vol. 73, no. 5, pp. 291–306, 2018. DOI:10.1080/10407782.2018.1444868.
  • H. D. Gu, Y. P. Chen, J. F. Wu, and S. F. Yang, “Performance comparison of helical baffle electric heaters with different baffle configurations,” Num. Heat Trans. A Appl., vol. 73, no. 4, pp. 241–253, 2018. DOI:10.1080/10407782.2017.1421738.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.