Heat transfer and pressure drop correlations for laminar flow in an in-line and staggered array of circular cylinders

References

• J. M. P. Q. Delgado, and H. a. Mass, Transfer in Porous Media. Berlin, Heidelberg: Springer-Verlag, 2012.
   Google Scholar
• C. Hutter, D. Büchi, V. Zuber, and P. Rudolf von Rohr, “Heat transfer in metal foams and designed porous media,” Chem. Eng. Sci., vol. 66, no. 17, pp. 3806–3814, 2011. DOI: 10.1016/j.ces.2011.05.005.
   Web of Science ®Google Scholar
• K.-J. Kang, “Wire-woven cellular metals: The present and future,” Prog. Mater. Sci., vol. 69, pp. 213–307, 2015. DOI: 10.1016/j.pmatsci.2014.11.003.
   Web of Science ®Google Scholar
• J. Tian et al., “The effects of topology upon fluid-flow and heat-transfer within cellular copper structures,” Int. J. Heat Mass Transfer, vol. 47, no. 14–16, pp. 3171–3186, 2004. DOI: 10.1016/j.ijheatmasstransfer.2004.02.010.
   Web of Science ®Google Scholar
• K. Boomsma, D. Poulikakos, and F. Zwick, “Metal foams as compact high performance heat exchangers,” Mech. Mater., vol. 35, no. 12, pp. 1161–1176, 2003. DOI: 10.1016/j.mechmat.2003.02.001.
   Web of Science ®Google Scholar
• D. Girlich, Grundsatzuntersuchungen Zum Einsatz Offenporiger Metallschäume in Der Luft-, Kälte- und Wärmetechnik. Lindenberg: Abschlussbericht, M-Pore GmbH, 2006.
   Google Scholar
• C. Marques, and K. W. Kelly, “Fabrication and performance of a pin fin micro heat exchanger,” J. Heat Transfer, vol. 126, no. 3, pp. 434–444, 2004. DOI: 10.1115/1.1731341.
   Web of Science ®Google Scholar
• D. J. Sypeck, and H. N. G. Wadley, “Multifunctional microtruss laminates: Textile synthesis and properties,” J. Mater. Res., vol. 16, no. 03, pp. 890–897, 2001. DOI: 10.1557/JMR.2001.0117.
   Google Scholar
• I. Kotcioglu, G. Omeroglu, and S. Caliskan, “Thermal performance and pressure drop of different pin-fin geometries,” Hittite J. Sci. Eng., vol. 1, pp. 13–20, 2014. DOI: 10.17350/HJSE19030000003.
   Google Scholar
• N. Sahiti, A. Lemouedda, D. Stojkovic, F. Durst, and E. Franz, “Performance comparison of pin fin in-duct flow arrays with various pin cross-sections,” Appl. Therm. Eng., vol. 26, no. 11–12, pp. 1176–1192, 2006. DOI: 10.1016/j.applthermaleng.2005.10.042.
   Web of Science ®Google Scholar
• R. K. Shah, and D. P. Sekulić, Fundamentals of Heat Exchanger Design, 1st ed. Hoboken, NJ: John Wiley & Sons, 2003.
   Google Scholar
• Y. Liu, G. Xu, X. Luo, H. Li, and J. Ma, “An experimental investigation on fluid flow and heat transfer characteristics of sintered woven wire mesh structures” Therm. Eng., vol. 80, pp. 118–126, 2015. DOI: 10.1016/j.applthermaleng.2015.01.050.
   Web of Science ®Google Scholar
• J. Xu, J. Tian, T. J. Lu, and H. P. Hodson, “On the thermal performance of wire-screen meshes as heat exchanger material,” Int. J. Heat Mass Transfer, vol. 50, no. 5–6, pp. 1141–1154, 2007. DOI: 10.1016/j.ijheatmasstransfer.2006.05.044.
   Web of Science ®Google Scholar
• S. B. Prasad, J. S. Saini, and K. M. Singh, “Investigation of heat transfer and friction characteristics of packed bed solar air heater using wire mesh as packing material,” Sol. Energy, vol. 83, no. 5, pp. 773–783, 2009. DOI: 10.1016/j.solener.2008.11.011.
   Web of Science ®Google Scholar
• C. Li, and R. A. Wirtz, Development of a High Performance Heat Sink Based on Screen-Fin Technology. Reno, NV: University of Nevada, 2003.
   Google Scholar
• E. van Andel, Heat exchanger and method for manufacturing same, Patent EP0714500 B1, 1996.
   Google Scholar
• J. P. Bonestroo, “Calculation model of fine-wire heat exchanger,” Master Thesis, Twente University, Enschede, Netherlands, 2012.
   Google Scholar
• H. Fugmann, P. D. Lauro, and L. Schnabel, Heat Transfer Surface Area Enlargement by Usage of Metal Textile Structures – Development, Potential and Evaluation. Dresden: International Textile Conference, 2016. DOI: 10.3390/en10091341.
   Google Scholar
• N. Sahiti, “Thermal and fluid dynamic performance of pin fin heat transfer surfaces,” PhD Thesis, Friedrich-Alexander Universität, Erlangen-Nürnberg, 2006.
   Google Scholar
• H. Fugmann, E. Laurenz, and L. Schnabel, “Wire structure heat exchangers—New designs for efficient heat transfer,” Energies, vol. 10, pp. 1341, 2017.
   Web of Science ®Google Scholar
• H. Fugmann, P. Di Lauro, A. Sawant, and L. Schnabel, “Development of heat transfer surface area enhancements: A test facility for new heat exchanger designs,” Energies, vol. 11, no. 5, pp. 1322, 2018. DOI: 10.3390/en11051322.
   Web of Science ®Google Scholar
• MinWaterCSP Project, Cooling Systems: Wire structure heat transfer surfaces. MinWaterCSP consortium. Available: https://www.minwatercsp.eu/technologies/cooling-systems/.
   Google Scholar
• I. Verein Deutscher, Wärmeatlas, 9th ed. Berlin & Heidelberg: Springer-Verlag, 2002.
   Google Scholar
• P. von Böckh, and T. Wetzel, Heat Transfer. Berlin, Heidelberg: Springer, 2012.
   Google Scholar
• R. K. Shah, and A. L. London, Laminar Flow Forced Convection in Ducts: A Source Book for Compact Heat Exchanger Analytical Data. New York: Academic Press, 1978.
   Google Scholar
• H. Fugmann, S. Gamisch, and L. Schnabel, Efficiency of Micro Pin Fin Heat Exchangers with Non-Uniform Temperature Profile of Ambient Fluid, submitted, August 2018.
   Google Scholar
• I. B. Celik, U. Ghia, P. J. Roache, C. J. Freitas, H. Coleman, and P. E. Raad, “Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications,” J. Fluids Eng., vol. 130, pp. 078001 (1–4) 2008. DOI: 10.1115/1.2960953.
   Google Scholar
• V. Gnielinski, “Gleichungen zur berechnung des wärmeübergangs in querdurchströmten einzelnen rohrreihen und rohrbündeln,” Forsch Ing-Wes, vol. 44, no. 1, pp. 15–25, 1978. DOI: 10.1007/BF02560750.
   Google Scholar
• H. N. Fairchild, and C. P. Welch, “Convection heat transfer and pressure drop of air flowing across in-line tube banks at close back spacings,” ASME Annual Meeting, New York, NY, 1961.
   Google Scholar
• B. Zohuri, Compact Heat Exchangers: Selection, Application, Design and Evaluation, 1st ed. Switzerland: Springer International Publishing, 2017.
   Google Scholar