Transient heat flux measurement analysis from coaxial thermocouples at convective based step heat load

References

• S. K. Manjhi and R. Kumar, “Stagnation point transient heat flux measurement analysis from coaxial thermocouples,” Exp. Heat Transfer, vol. 31, no. 5, pp. 405–424, 2018. DOI: 10.1080/08916152.2018.1431738.
   Web of Science ®Google Scholar
• A. Trejo, C. Garcia, and A. Choudhuri, “Experimental investigation of transient forced convection of liquid methane in a channel at high heat flux conditions,” Exp. Heat Transfer, vol. 29, no. 1, pp. 97–112, 2016. DOI: 10.1080/08916152.2015.1113215.
   Web of Science ®Google Scholar
• D. Chatterjee, B. Mondal, and P. Halder, “Unsteady forced convection heat transfer over a semicircular cylinder at low Reynolds numbers,” Numer. Heat Transfer, Part A, vol. 63, no. 6, pp. 411–429, 2013. DOI: 10.1080/10407782.2013.742733.
   Web of Science ®Google Scholar
• N. Daouas, “An alternative sensitivity method for a two-dimensional inverse heat conduction-radiation problem based on transient hot-wire measurements,” Numer. Heat Transfer, Part B, vol. 73, no. 2, pp. 106–128, 2018. DOI: 10.1080/10407790.2017.1420325.
   Web of Science ®Google Scholar
• M. Zhu, Y. Zhao, Z. Xiao, and Y. Deng, “Surface temperature prediction of novel non-pneumatic mechanical elastic wheel based on theory analysis and experimental verification,” Numer. Heat Transfer, Part B, vol. 73, no. 6, pp. 399–414, 2018. DOI: 10.1080/10407790.2018.1491721.
   Web of Science ®Google Scholar
• N. Sahoo, and R. Kumar, “Performance assessment of thermal sensors during short-duration convective surface heating measurements,” Heat Mass Transfer, vol. 52, no. 9, pp. 2005–2013, 2016. DOI: 10.1007/s00231-015-1694-0.
   Web of Science ®Google Scholar
• R. Kumar, N. Sahoo, V. Kulkarniand, and A. Singh, “Laser based calibration technique for thin film coaxial thermocouples for short duration transient measurements,” ASME J. Therm. Sci. Eng. Appl., vol. 3, no. 4, pp. 044504–0445046, 2011. DOI: 10.1115/1.4005075.
   Google Scholar
• S. Sharma, N. Sahoo, and A. Unal, “Calibration of a silver thin film gauge for short duration convective step heat load,” Indian Acad. Sci. Sādhanā, vol. 41, no. 7, pp. 787–794, 2016. DOI 10.1007/s12046-016-0513-8
   Web of Science ®Google Scholar
• S. Agarwal, N. Sahoo, and R. Singh, “Experimental techniques for thermal product determination of coaxial surface junction thermocouples during short duration transient measurements,” Int. J. Heat Mass Transfer, vol. 103, pp. 327–335, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.07.062.
   Web of Science ®Google Scholar
• H. Chen, J. I. Frankel, and M. Keyhani, “Nonlinear inverse heat conduction problem of surface temperature estimation by calibration integral equation method,” Numer. Heat Transfer, Part B, Vol. vol. 73, no. 5, pp. 263–291, 2018. Doi: DOI: 10.1080/10407790.2018.1464316.
   Web of Science ®Google Scholar
• N. M. Reddy, K. Nagashetty, G. Jagadeesh, and K. P. J. Reddy, “Review of hypersonic research investigations in the IISc shock tunnel (HST1),” Proc. Indian Acad. Sci. Sadhana, vol. 21,no. 6, pp. 741–773, 1996. DOI: 10.1007/BF02745368.
   Google Scholar
• D. R. Buttsworth, “Assessment of effective thermal product of surface junction thermocouple on millisecond and microsecond time scale,” Exp. Therm. Fluid Sci., vol. 25, no. 6, pp. 409–420, 2001. DOI: 10.1016/S0894-1777(01)00093-0.
   Web of Science ®Google Scholar
• R. Kumar and N. Sahoo, “Dynamic calibration of a coaxial thermocouples for short duration transient measurements,” J. Heat Transfer, vol. 135, no. 12, pp. 124502–124507, 2013. DOI: 10.1115/1.4024593.
   Web of Science ®Google Scholar
• S. R. Sanderson and B. Sturtevant, “Transient heat flux measurement using a surface junction thermocouple,” Rev. Sci. Instrum., vol. 73, no. 7, pp. 2781–2787, 2002. DOI: 10.1063/1.1484255.
   Web of Science ®Google Scholar
• M. A. Marr, J. S. Wallace, S. Chandra, L. Pershin, and J. Mostaghimi, “A fast response thermocouple for internal combustion engine surface temperature measurements,” Exp. Ther. Fluid Sci., vol. 34, no. 2, pp. 183–189, 2010. DOI: 10.1016/j.expthermflusci.2009.10.008.
   Web of Science ®Google Scholar
• H. A. Mohammed, H. Salleh, and M. Z. Yusoff, “Design, fabrication of coaxial surface junction thermocouples for transient heat transfer measurements,” Int. Commun. Heat Mass Transfer, vol. 35,no. 7, pp. 853–859, 2008. DOI: 10.1016/j.icheatmasstransfer.2008.03.009.
   Web of Science ®Google Scholar
• V. Menezes and S. Bhat, “A coaxial thermocouple for shock tunnel applications,” Rev. Sci. Instrum., vol. 81, no. 10, pp. 104905–104909, 2010. DOI: 10.1063/1.3494605.
   PubMed Web of Science ®Google Scholar
• J. A. Gatowski, M. K. Smith, and A. C. Alkidas, “An experimental investigation of surface thermometry and heat flux,” Exp. Therm. Fluid Sci., vol. 2, no. 3, pp. 280–285, 1989. DOI: 10.1016/0894-1777(89)90017-4.
   Web of Science ®Google Scholar
• H. A. Mohammed, H. Salleh, and M. Z. Yusoff, “Dynamic calibration and performance of reliable and fast response temperature probes in a shock tube facility,” Exp. Heat Transfer, vol. 24, no. 2, pp. 109–132, 2011. DOI: org/10.1080/08916152.2010.482752.
   Web of Science ®Google Scholar
• K. J. Irimpan, N. Mannil, H. Arya, and V. Menezes, “Performance evaluation of coaxial thermocouple against platinum thin film gauge for heat flux measurement in shock tunnel,” Measurement, vol. 61, pp. 291–298, 2015. DOI: 10.1016/j.measurement.2014.10.056.
   Web of Science ®Google Scholar
• R. Kumar, N. Sahoo, and V. Kulkarni, “Conduction based calibration of handmade platinum thin film heat transfer gauges for transient measurements,” Int. J. Heat Mass Transfer, vol. 55, no. 9-10, pp. 2707–2713, 2012. DOI: org/10.1016/j.ijheatmasstransfer.2012.01.026.
   Web of Science ®Google Scholar
• B. Sundqvist, “Thermal diffusivity and thermal conductivity of chrome, Alumel, and constantan in the range 100-450 K,” J. Appl. Phys., vol. 72, no. 2, pp. 539–545, 1992. DOI: org/10.1063/1.351885.
   Web of Science ®Google Scholar
• R. Kumar, N. Sahoo, and V. Kulkarni, “Design, fabrication and calibration of heat transfer gauges for transient measurement,” ASME Conference, Vancouver. British Columbia, Canada, IMECE2010, pp. 12–18, Nov 2010.
   Google Scholar
• V. Mladenov, P. Karampelas, G. Tsenovand, and V. Vita, “Approximation formula for easy calculation of signal-to-noise ratio of sigma-delta modulators,” ISRN Signal Process., vol. 2011, pp. 1–7, 2011. DOI: 10.5402/2011/731989.
   Google Scholar
• D. L. Schultz and T. V. Jones, Heat Transfer Measurement in Short Duration Hypersonic Facilities, AGARD NO.165. University of Oxford Britain, London, pp. 47–50, 1973.
   Google Scholar
• J. Taler, “Theory of transient experimental techniques for surface heat transfer,” Int. J. Heat Mass. Transfer, vol. 39, no. 17, pp. 3733–3748, 1996. DOI: 10.1016/0017-9310(96)00015-4.
   Web of Science ®Google Scholar
• H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids, 2nd ed. Oxford, UK: Clarendon Press, 1959. DOI: https://trove.nla.gov.au/work/10568159
   Google Scholar
• R. J. Moffat, “Using uncertainty analysis in planning of an experiment,” ASME J. Fluids Eng., vol. 10, no. 2, pp. 173–178, 1985. DOI: 10.1115/1.3242452.
   Google Scholar