References
- M. S. Alam, L. Prasad, S. C. Gupta, and V. K. Agarwal, “Enhanced boiling of saturated water on copper coated heating tubes,” Chem. Eng. Process., vol. 47, no. 1, pp. 159–167, 2008. DOI: 10.1016/j.cep.2007.07.021.
- S. Witharana, “Boiling of Refrigerants on Enhanced Surfaces and Boiling of Nanofluids,” Ph.D. Thesis, Royal Institute of Technology, Stockholm, Sweden, 2003.
- H. D. Kim, J. B. Kim, and M. H. Kim, “Effect of nanoparticles on CHF enhancement in pool boiling of nano-fluids,” Int. J. Heat. Mass Transfer, vol. 49, no. 25–26, pp. 5070–5074, 2006. DOI: 10.1016/j.ijheatmasstransfer.2006.07.019.
- S. J. Kim, I. C. Bang, J. Buongiorno, and L. W. Hu, “Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux,” Int. J. Heat. Mass Transfer, vol. 50, no. 19–20, pp. 4105–4116, 2007. DOI: 10.1016/j.ijheatmasstransfer.2007.02.002.
- S. M. You, J. H. Kim, and K. H. Kim, “Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer,” Appl. Phys. Lett., vol. 83, no. 16, pp. 3374–3376, 2003. DOI: 10.1063/1.1619206.
- S. M. Kwark, R. Kumar, G. Moreno, J. Yoo, and S. M. You, “Pool boiling characteristics of low concentration nanofluids,” Int. J. Heat. Mass Transfer, vol. 53, no. 5–6, pp. 972–981, 2010. DOI: 10.1016/j.ijheatmasstransfer.2009.11.018.
- E. Krepper, B. Konˇcar, and Y. Egorov, “CFD modelling of subcooled boiling—Concept, validation and application to fuel assembly design,” Nucl. Eng. Des., vol. 237, no. 7, pp. 716–731, 2007. DOI: 10.1016/j.nucengdes.2006.10.023.
- Y. Liu, T. Olewski, L. Vechot, X. Gao, and S. Mannan, “Modelling of a Cryogenic Liquid Pool Boiling Using CFD Code,” 14th Symposium Mary Kay O’Connor Process Safety Center, Artie McFerrin Department of Chemical Engineering, Texas A&M University. College Station, Texas, 2011.
- A. Azari, M. Kalbasi, and M. Rahimi, “CFD and experimental investigation on the heat transfer characteristics of alumina nanofluids under the laminar flow regime,” Braz. J. Chem. Eng., vol. 31, no. 2, pp. 469–481, 2014. DOI: 10.1590/0104-6632.20140312s00001959.
- H. A. Pakravan and M. Yaghoubi, “Analysis of nanoparticles migration on natural convective heat transfer of nanofluids,” Int. J. Therm. Sci., vol. 68, pp. 79–93, 2013. DOI: 10.1016/j.ijthermalsci.2012.12.012.
- H. Li, S. A. Vasquez, H. Punekar, and R. Muralikrishnan, “Prediction of Boiling and Critical Heat Flux Using an Eulerian Multiphase Boiling Model,” International Mechanical Engineering Congress & Exposition, IMECE2011. Denver, Colorado, USA, 2011.
- ANSYS User Manual. Canonsburg, PA: Ansys, Inc., 2009.