Wall boiling in a vertical annulus: Effect of inlet subcooling and mass flow rate

References

• S. Hua, R. Huang, Z. Li, and P. Zhou, “Experimental study on the heat transfer characteristics of subcooled fl ow boiling with cast iron heating surface,” Appl. Therm. Eng., vol. 77, pp. 180–191, 2015. DOI: 10.1016/j.applthermaleng.2014.11.082.
   Web of Science ®Google Scholar
• S. Husain and M. A. Siddiqui, “Experimental and numerical analyses of natural convection flow in a partially heated vertical annulus,” Numer. Heat Transf. Part A Appl., vol. 70, no. 7, pp. 763–775, 2016. DOI: 10.1080/10407782.2016.1214488.
   Web of Science ®Google Scholar
• J. G. Collier and J. R. Thome, Convective Boiling and Condensation. London, UK: Clarendon Press, 1994.
   Google Scholar
• L. Zhang, et al., “Natural convection heat transfer in corium pools: A review work of experimental studies,” Prog. Nucl. Energy, vol. 79, pp. 167–181, 2015. DOI: 10.1016/j.pnucene.2014.11.021.
   Web of Science ®Google Scholar
• J. Y. Tu and G. H. Yeoh, “On numerical modelling of low-pressure subcooled boiling flows,” Int. J. Heat Mass Transf., vol. 45, no. 6, pp. 1197–1209, 2002. DOI: 10.1016/S0017-9310(01)00230-7.
   Web of Science ®Google Scholar
• B. Končar, I. Kljenak, and B. Mavko, “Modelling of local two-phase flow parameters in upward subcooled flow boiling at low pressure,” Int. J. Heat Mass Transf., vol. 47, no. 6-7, pp. 1499–1513, 2004. DOI: 10.1016/j.ijheatmasstransfer.2003.09.021.
   Web of Science ®Google Scholar
• V. Ustinenko et al., “Validation of CFD-BWR, a new two-phase computational fluid dynamics model for boiling water reactor analysis,” Nucl. Eng. Des., vol. 238, no. 3, pp. 660–670, 2008. DOI: 10.1016/j.nucengdes.2007.02.046.
   Web of Science ®Google Scholar
• J.-M. Le Corre, S.-C. Yao, and C. H. Amon, “A mechanistic model of critical heat flux under subcooled flow boiling conditions for application to one- and three-dimensional computer codes,” Nucl. Eng. Des., vol. 240, no. 2, pp. 235–244, 2010. DOI: 10.1016/j.nucengdes.2008.12.007.
   Web of Science ®Google Scholar
• R. Zhuan and W. Wang, “Simulation of subcooled flow boiling in a micro-channel,” Int. J. Refrig., vol. 34, no. 3, pp. 781–795, 2011. DOI: 10.1016/j.ijrefrig.2010.12.004.
   Web of Science ®Google Scholar
• E. Krepper and R. Rzehak, “CFD for subcooled flow boiling: Simulation of DEBORA experiments,” Nucl. Eng. Des., vol. 241, no. 9, pp. 3851–3866, 2011. DOI: 10.1016/j.nucengdes.2011.07.003.
   Web of Science ®Google Scholar
• B. J. Yun, A. Splawski, S. Lo, and C. H. Song, “Prediction of a subcooled boiling flow with advanced two-phase flow models,” Nucl. Eng. Des., vol. 253, pp. 351–359, 2012. DOI: 10.1016/j.nucengdes.2011.08.067.
   Web of Science ®Google Scholar
• L. Yang, A. Guo, and W. Zhang, “Computational fluid dynamics simulation of subcooled flow boiling in vertical rectangular 2-mm narrow channel,” Adv. Mech. Eng., vol. 7, no. 7, pp. 1–12, 2015.
   Web of Science ®Google Scholar
• Y. Bouaichaoui, R. Kibboua, and M. Matkovič, “Experimental measurements and CFD simulation of convective boiling during subcooled developing flow of R-11 within vertical annulus,” Heat Mass Transf., vol. 51, no. 5, pp. 735–748, 2015. DOI: 10.1007/s00231-014-1449-3.
   Web of Science ®Google Scholar
• K. Narrein, S. Sivasankaran, and P. Ganesan, “Numerical investigation of two-phase laminar pulsating nanofluid flow in a helical microchannel,” Numer,” Heat Transf. Part A Appl., vol. 69, no. 8, pp. 921–930, 2016. DOI: 10.1080/10407782.2015.1090834.
   Web of Science ®Google Scholar
• I. Behroyan, P. Ganesan, S. He, and S. Sivasankaran, “CFD models comparative study on nanofluids subcooled flow boiling in a vertical pipe,” Numer. Heat Transf. Part A Appl., vol. 73, no. 1, pp. 55–74, 2018. DOI: 10.1080/10407782.2017.1420299.
   Web of Science ®Google Scholar
• Y. Luo, et al., “Numerical investigation of the bubble growth in horizontal rectangular microchannels,” Numer. Heat Transf. Part A Appl., vol. 71, no. 12, pp. 1175–1188, 2017. DOI: 10.1080/10407782.2017.1350538.
   Web of Science ®Google Scholar
• Y. Gao, et al., “Numerical investigation on onset of significant void during water subcooled flow boiling,” Appl. Therm. Eng., vol. 105, pp. 8–17, 2016. DOI: 10.1016/j.applthermaleng.2016.05.127.
   Web of Science ®Google Scholar
• J. Mustafa, S. Husain, and M. A. Siddiqui, “Experimental studies on natural convection of water in a closed-loop vertical annulus,” Exp. Heat Transf., vol. 30, no. 1, pp. 25–45, 2017. DOI: 10.1080/08916152.2015.1135202.
   Web of Science ®Google Scholar
• S. Husain and M. A. Siddiqui, “Experimental and numerical analysis of transient natural convection of water in a high aspect ratio narrow vertical annulus,” Prog. Nucl. Energy, vol. 106, pp. 1–10, 2018. DOI: 10.1016/j.pnucene.2018.02.013.
   Web of Science ®Google Scholar
• S. Husain, M. A. Siddiqui, and S. A. Khan, “Effect of geometrical parameters on natural convection of water in a narrow annulus,” Prog. Nucl. Energy, vol. 112, pp. 146–161, 2019. DOI: 10.1016/j.pnucene.2018.12.011.
   Web of Science ®Google Scholar
• S. Husain and M. A. Siddiqui, “Experimental studies on natural convection boiling of water in a vertical annulus of a closed-loop thermo-siphon,” Exp. Heat Transf., vol. 30, no. 5, pp. 441–462, 2017. DOI: 10.1080/08916152.2017.1283372.
   Web of Science ®Google Scholar
• S. Husain and M. A. Siddiqui, “Numerical and experimental analysis of natural convection flow boiling of water in internally heated vertical annulus,” Numer. Heat Transf. Part A Appl., vol. 73, no. 9, pp. 624–653, 2018. DOI: 10.1080/10407782.2018.1464315.
   Web of Science ®Google Scholar
• M. A. Siddiqui, M. Kamil, M. Asif, and A. M. Jairajpuri, “Experimental study of boiling incipience in a closed loop vertical annular thermosiphon,” Appl. Therm. Eng., vol. 30, no. 11-12, pp. 1333–1340, 2010. DOI: 10.1016/j.applthermaleng.2010.02.020.
   Web of Science ®Google Scholar
• N. Kurul and M. Podowski, “On the modeling of multidimensional effects in boiling channels ANS,” presented at the Proceedings of the 27th National Heat Transfer Conference, Minneapolis, MN, USA, 1991.
   Google Scholar
• V. H. Del Valle and D. B. R. Kenning, “Subcooled flow boiling at high heat flux,” Int. J. Heat Mass Transf., vol. 28, no. 10, pp. 1907–1920, 1985. DOI: 10.1016/0017-9310(85)90213-3.
   Web of Science ®Google Scholar
• R. Cole, “A photographic study of pool boiling in the region of the critical heat flux,” AIChE J., vol. 6, no. 4, pp. 533–538, 1960. DOI: 10.1002/aic.690060405.
   Web of Science ®Google Scholar
• M. Lemmert and J. M. Chawla, “Influence of flow velocity on surface boiling heat transfer coefficient,” Heat Transf. Boil., vol. 237, pp. 247, 1977.
   Google Scholar
• F. R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications,” AIAA J., vol. 32, no. 8, pp. 1598–1605, 1994. DOI: 10.2514/3.12149.
   Web of Science ®Google Scholar
• Y. Sato and K. Sekoguchi, “Liquid velocity distribution in two-phase bubble flow,” Int. J. Multiph. Flow, vol. 2, no. 1, pp. 79–95, 1975. DOI: 10.1016/0301-9322(75)90030-0.
   Google Scholar
• G. G. Bartolomei and V. M. Chanturiya, “Experimental study of true void fraction when boiling subcooled water in vertical tubes,” Therm. Eng, vol. 14, no. 2, pp. 123–128, 1967.
   Google Scholar
• S. P. Antal, R. T. Lahey, and J. E. Flaherty, “Analysis of phase distribution in fully developed laminar bubbly two-phase flow,” Int. J. Multiph. Flow, vol. 17, no. 5, pp. 635–652, 1991. DOI: 10.1016/0301-9322(91)90029-3.
   Web of Science ®Google Scholar
• A. D. Burns, T. Frank, I. Hamill, and J. M. Shi, “The Favre averaged drag model for turbulent dispersion in Eulerian multi-phase flows,” presented at the Proceedings of the ICMF-2004, 5th international conference on multiphase flow: Yokohama, Japan, [May 30–June 4], No.4, 2004.
   Google Scholar
• W. E. Ranz and W. R. Marshall, Jr, “Evaporation from drops, part I,” Chem. Eng. Prog., vol. 48, no. 3, pp. 141–146, 1952.
   Web of Science ®Google Scholar