References
- L. Fratalocchi, C. G. Visconti, G. Groppi, L. Lietti, and E. Tronconi, “Intensifying heat transfer in Fischer-Tropsch tubular reactors through the adoption of conductive packed foams,” Chem. Eng. J., vol. 349, pp. 829–837, 2018. DOI: 10.1016/j.cej.2018.05.108.
- J. Chen, Z. Ring, and T. Dabros, “Modeling and simulation of a fixed-bed pilot-plant hydrotreater,” Ind. Eng. Chem. Res., vol. 40, no. 15, pp. 3294–3300, 2001. DOI: 10.1021/ie001083v.
- T. Ouni, M. Honkela, A. Kolah, and J. Aittamaa, “Isobutene dimerisation in a miniplant-scale reactor,” Chem. Eng. Process, vol. 45, no. 5, pp. 329–339, 2006. DOI: 10.1016/j.cep.2005.09.005.
- M. G. Freiwald and W. R. Paterson, “Accuracy of model predictions and reliability of experimental data for heat transfer in packed beds,” Chem. Eng. Sci., vol. 47, no. 7, pp. 1545–1560, 1992. DOI: 10.1016/0009-2509(92)85003-T.
- Y. Dong, B. Sosna, O. Korup, F. Rosowski, and R. Horn, “Investigation of radial heat transfer in a fixed-bed reactor: CFD simulations and profile measurements,” Chem. Eng. J., vol. 317, pp. 204–214, 2017. DOI: 10.1016/j.cej.2017.02.063.
- B. Sosna, Y. Dong, L. Chromow, O. Korup, and R. Horn, “Effective axial thermal conductivity in catalyst packings from high resolution temperature profiles,” Chem. Ing. Tech, vol. 88, no. 11, pp. 1676–1683, 2016. DOI: 10.1002/cite.201600062.
- T. Mongkhonsi, H. F. López-Isunza, and L. S. Kershenbaum, “The distortion of measured temperature profiles in fixed bed reactors,” Chem. Eng. Res. Des, vol. 70, pp. 255–264, 1992.
- K. Kamiuto, S. Saito, and K. Ito, “Numerical model for combined conductive and radiative heat transfer in annular packed beds,” Numer. Heat Transf. A Appl., vol. 23, no. 4, pp. 433–443, 1993. DOI: 10.1080/10407789308913681.
- J. C. Pirkle, H. S. Kheshgi, and P. S. Hagan, “An accurate one-dimensional model for nonadiabatic annular reactors,” AIChE J., vol. 37, no. 8, pp. 1265–1269, 1991. DOI: 10.1002/aic.690370819.
- C. G. Du Toit, W. Van Antwerpen, and P. G. Rousseau, “Analysis of the porous structure of an annular pebble bed reactor,” presented at the ICAPP 2009 Conference, Tokyo, Japan, May 10–14, 2009, Paper ID 9123.
- V. G. Landon, “Temperature correction for packed bed multitubular reactors with concentric axial thermowells,” Comput. Chem. Eng., vol. 20, no. 5, pp. 475–481, 1996. DOI: 10.1016/0098-1354(95)00178-6.
- D. Chatterjee and S. K. Gupta, “Convective transport around rows of square cylinders arranged in a staggered fashion at moderate Reynolds number,” Numer. Heat Transf. A Appl., vol. 68, no. 4, pp. 388–410, 2015. DOI: 10.1080/10407782.2014.986004.
- H. Fugmann, L. Schnabel, and B. Frohnapfel, “Heat transfer and pressure drop correlations for laminar flow in an in-line and staggered array of circular cylinders,” Numer. Heat Transf. A Appl., vol. 75, no. 1, pp. 1–20, 2019. DOI: 10.1080/10407782.2018.1562741.
- A. S. Jebakumar, V. Magi, and J. Abraham, “Lattice-Boltzmann simulations of flow past stationary particles in a channel,” Numer. Heat Transf. A Appl., vol. 76, no. 5, pp. 281–300, 2019. DOI: 10.1080/10407782.2019.1630240.
- A. G. Dixon, M. Nijemeisland, and E. H. Stitt, “Packed tubular reactor modeling and catalyst design using computational fluid dynamics,” Adv. Chem. Eng., vol. 31, pp. 307–389, 2006.
- N. Jurtz, M. Kraume, and G. D. Wehinger, “Advances in fixed-bed reactor modeling using particle-resolved computational fluid dynamics (CFD),” Rev. Chem. Eng., vol. 35, no. 2, pp. 139–190, 2019. DOI: 10.1515/revce-2017-0059.
- J. Touitou et al., “Evaluation of an in situ spatial resolution instrument for fixed beds through the assessment of the invasiveness of probes and a comparison with a micro-kinetic model,” J. Catal., vol. 319, pp. 239–246, 2014. DOI: 10.1016/j.jcat.2014.09.006.
- A. G. Dixon, “CFD Study of local transport and reaction rates in a fixed bed reactor tube: Endothermic steam methane reforming,” Chem. Eng. Sci., vol. 168, pp. 156–177, 2017. DOI: 10.1016/j.ces.2017.04.039.
- M. Kuroki, S. Ookawara, and K. A. Ogawa, “High-fidelity CFD model of methane steam reforming in a packed bed reactor,” J. Chem. Eng. Japan, vol. 42, pp. s73–s78, 2009. DOI: 10.1252/jcej.08we256.
- T. Eppinger, K. Seidler, and M. Kraume, “DEM-CFD simulations of fixed bed reactors with small tube to particle diameter ratios,” Chem. Eng. J., vol. 166, no. 1, pp. 324–331, 2011. DOI: 10.1016/j.cej.2010.10.053.
- A. G. Dixon, M. Nijemeisland, and E. H. Stitt, “Systematic mesh development for 3D CFD simulation of fixed beds: Contact points study,” Comput. Chem. Eng, vol. 48, pp. 135–153, 2013. DOI: 10.1016/j.compchemeng.2012.08.011.
- A. G. Dixon, M. E. Taskin, M. Nijemeisland, and E. H. Stitt, “CFD method to couple three-dimensional transport and reaction inside catalyst particles to the fixed bed flow field,” Ind. Eng. Chem. Res., vol. 49, no. 19, pp. 9012–9025, 2010. DOI: 10.1021/ie100298q.
- A. G. Dixon, “The length effect on packed bed effective heat transfer parameters,” Chem. Eng. J., vol. 31, no. 3, pp. 163–173, 1985. DOI: 10.1016/0300-9467(85)80057-5.
- O. R. Derkx and A. G. Dixon, “Comparison of correlations for the wall heat transfer coefficients in a fixed bed reactor,” AIChE Symp. Ser., vol. 92, pp. 126–133, 1996.
- S. Ergun, “Fluid flow through packed columns,” Chem. Eng. Prog., vol. 48, pp. 89–94, 1952.
- J. R. Sodré and J. A. R. Parise, “Fluid flow pressure drop through an annular bed of spheres with wall effects,” Exp. Therm. Fluid Sci., vol. 17, no. 3, pp. 265–275, 1998. DOI: 10.1016/S0894-1777(97)10022-X.