Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 77, 2020 - Issue 12
304
Views
6
CrossRef citations to date
0
Altmetric
Original Articles

Heat transfer enhancement of rotating wedge-shaped channels with pin fins and Kagome lattices

, , , ORCID Icon & ORCID Icon
Pages 1014-1033 | Received 22 Jan 2020, Accepted 19 Mar 2020, Published online: 07 Apr 2020

References

  • U. Uysal and I. Taymaz, “Experimental investigation of heat transfer on trapezoidal channel with three passes,” J. Therm. Anal. Calorim., vol. 136, pp. 1–12, 2019.
  • M. P. Boyce, Gas Turbine Engineering Handbook, 4th ed. Amsterdam: Butterworth-Heinemann, 2006.
  • T. Horbach, A. Schulz, and H. J. Bauer, “Trailing edge film cooling of gas turbine airfoils-external cooling performance of various internal pin fin configurations,” J. Turbomach., vol. 133, no. 4, 2011.
  • G. Liao, X. Wang, X. Bai, D. Zhu, and J. Yao, “Numerical investigation on the flow and heat transfer characteristics of the superheated steam in the wedge duct with pin-fins,” in Proceedings of the ASME Turbo Expo, San Antonio, TX, USA, vol. 3, 2013. DOI: 10.1115/GT2013-94205.
  • A. Tomasi, P. Scardi, P. G. Orsini, and F. Bregani, “Thermogravimetric analysis of superalloys used for blade and vane applications in industrial gas turbine - Kinetics and mechanism of thermal degradation,” J. Therm. Anal., vol. 41, no. 6, pp. 1453–1462, 1994. DOI: 10.1007/BF02549941.
  • C. Bianchini, B. Facchini, F. Simonetti, L. Tarchi, and S. Zecchi, “Numerical and experimental investigation of turning flow effects on innovative pin fin arrangements for trailing edge cooling configurations,” J. Turbomach., vol. 134, no. 2, pp. 021005-1, 2012.
  • K. K. Ferster, K. L. Kirsch, and K. A. Thole, “Effects of geometry, spacing, and number of pin fins in additively manufactured microchannel pin fin arrays,” J. Turbomach., vol. 140, no. 1, pp. 011007-1, 2018.
  • S. W. Chang, T. M. Liou, S. F. Chiou, and S. F. Chang, “Heat transfer in high-speed rotating trapezoidal duct with rib-roughened surfaces and air bleeds from the wall on the apical side,” J. Heat Transfer, vol. 130, no. 6, pp. 061702-1, 2008.
  • Y. Li, G. Xu, H. Deng, L. Qiu, and X. Yu, “Effects of coolant mass flow rate ratio on heat transfer in a two-inlet rotating wedge-shaped channel,” Int. J. Heat Mass Transfer, vol. 96, pp. 353–361, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.01.046.
  • L. Qiu, H. Deng, and Z. Tao, “Effect of channel orientation in a rotating smooth wedge-shaped cooling channel with lateral ejection,” in Proceedings of the ASME Turbo Expo, San Antonio, TX, USA vol. 3, 2013. DOI: 10.1115/GT2013-94758.
  • Z. Tao, L. Qiu, and H. Deng, “Heat transfer in a rotating smooth wedge-shaped channel with lateral fluid extraction,” Appl. Therm. Eng., vol. 87, pp. 47–55, 2015. DOI: 10.1016/j.applthermaleng.2015.04.073.
  • J. H. Wagner, B. V. Johnson, and T. J. Hajek, “Heat transfer in rotating passages with smooth walls and radial outward flow,” J. Turbomach., vol. 113, no. 1, pp. 42–51, 1991. DOI: 10.1115/1.2927736.
  • J. W. Wagner, B. V. Johnson, and F. C. Kopper, “Heat transfer in rotating serpentine passages with smooth walls,” J. Turbomach., vol. 113, no. 3, pp. 321–330, 1991. DOI: 10.1115/1.2927879.
  • S. Dutta, M. J. Andrews, and J. C. Han, “Prediction of turbulent heat transfer in rotating smooth square ducts,” Int. J. Heat Mass Transfer, vol. 39, no. 12, pp. 2505–2514, 1996. DOI: 10.1016/0017-9310(95)00319-3.
  • J. C. Han, Y. M. Zhang, and K. Kalkuehler, “Uneven wall temperature effect on local heat transfer in a rotating two-pass square channel with smooth walls,” J. Heat Transfer, vol. 115, no. 4, pp. 912–920, 1993. DOI: 10.1115/1.2911387.
  • J. Lei, S. J. Li, J. C. Han, L. Zhang, and H. K. Moon, “Effect of a turning vane on heat transfer in rotating multipass rectangular smooth channel,” J. Thermophys. Heat Transf., vol. 28, no. 3, pp. 417–427, 2014. DOI: 10.2514/1.T4311.
  • S. Abdel-Wahab and D. K. Tafti, “Large eddy simulation of flow and heat transfer in a 90 deg ribbed duct with rotation: effect of Coriolis and centrifugal buoyancy forces,” J. Turbomach, vol. 126, no. 4, pp. 627–636, 2004. DOI: 10.1115/1.1791648.
  • B. Zhao, H. Deng, L. Qiu, and S. Ding, “Heat transfer in rotating trailing edge channels,” Beijing Hangkong Hangtian Daxue Xuebao/J. Beijing Univ. Aeronaut. Astronaut., vol. 38, no. 12, pp. 1634–1638, 2012.
  • H. Deng, Y. Han, Z. Tao, Y. Li, and J. Wang, “Heat transfer in a rotating trailing edge wedge-shaped cooling channel with two inflow forms,” Exp. Therm. Fluid Sci., vol. 88, pp. 530–541, 2017. DOI: 10.1016/j.expthermflusci.2017.07.008.
  • H. Deng et al., “Heat transfer of a rotating two-inlet trailing edge channel with lateral fluid extractions,” Int. J. Therm. Sci., vol. 125, pp. 313–323, 2018. DOI: 10.1016/j.ijthermalsci.2017.11.034.
  • H. Zhou et al., “Experimental research in rotating wedge-shaped cooling channel with multiple non-equant holes lateral inlet,” Chinese J. Aeronaut., vol. 31, no. 3, pp. 457–469, 2018. DOI: 10.1016/j.cja.2018.01.013.
  • H.-W. Wu, H. Zirakzadeh, J.-C. Han, L. Zhang, and H.-K. Moon, “Heat transfer in a rib and pin roughened rotating multipass channel with hub turning vane and trailing-edge slot ejection,” J. Therm. Sci. Eng. Appl., vol. 10, no. 2, pp. 021011-1, 2018.
  • H. N. G. Wadley, “Multifunctional periodic cellular metals,” Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., vol. 364, no. 1838, pp. 31–68, 2006. DOI: 10.1098/rsta.2005.1697.
  • V. S. Deshpande, N. A. Fleck, and M. F. Ashby, “Effective properties of the octet-truss lattice material,” J. Mech. Phys. Solids, vol. 49, no. 8, pp. 1747–1769, 2001. DOI: 10.1016/S0022-5096(01)00010-2.
  • S. Chiras et al., “The structural performance of near-optimized truss core panels,” Int. J. Solids Struct., vol. 39, no. 15, pp. 4093–4115, 2002. DOI: 10.1016/S0020-7683(02)00241-X.
  • D. T. Queheillalt and H. N. G. Wadley, “Pyramidal lattice truss structures with hollow trusses,” Mater. Sci. Eng. A, vol. 397, no. 1-2, pp. 132–137, 2005. DOI: 10.1016/j.msea.2005.02.048.
  • M. Zupan, V. S. Deshpande, and N. A. Fleck, “The out-of-plane compressive behaviour of woven-core sandwich plates,” Eur. J. Mech. A/Solids, vol. 23, no. 3, pp. 411–421, 2004. DOI: 10.1016/j.euromechsol.2004.01.007.
  • S. Hyun, A. M. Karlsson, S. Torquato, and A. G. Evans, “Simulated properties of Kagomé and tetragonal truss core panels,” Int. J. Solids Struct., vol. 40, no. 25, pp. 6989–6998, 2003. DOI: 10.1016/S0020-7683(03)00350-0.
  • J. Wang, A. G. Evans, K. Dharmasena, and H. N. G. Wadley, “On the performance of truss panels with Kagomé cores,” Int. J. Solids Struct., vol. 40, no. 25, pp. 6981–6988, 2003. DOI: 10.1016/S0020-7683(03)00349-4.
  • T. J. Lu, L. Valdevit, and A. G. Evans, “Active cooling by metallic sandwich structures with periodic cores,” Prog. Mater. Sci., vol. 50, no. 7, pp. 789–815, 2005. DOI: 10.1016/j.pmatsci.2005.03.001.
  • J. Tian et al., “The effects of topology upon fluid-flow and heat-transfer within cellular copper structures,” Int. J. Heat Mass Transfer, vol. 47, no. 14-16, pp. 3171–3186, 2004., no DOI: 10.1016/j.ijheatmasstransfer.2004.02.010.
  • S. G. Krishnan, K. K. Bodla, J. A. Weibel, and S. V. Garimella, “Numerical investigation of fluid flow and heat transfer in periodic porous lattice-frame materials,” in Proceedings of The 15th International Heat Transfer Conference, and IHTC 2014, Kyoto, Japan, 2014. DOI: 10.1615/IHTC15.pmd.008706.
  • B. Shen, H. Yan, H. Xue, and G. Xie, “The effects of geometrical topology on fluid flow and thermal performance in Kagome cored sandwich panels,” Appl. Therm. Eng., vol. 142, pp. 79–88, 2018. DOI: 10.1016/j.applthermaleng.2018.06.080.
  • B. Shen, Y. Li, H. Yan, S. K. S. Boetcher, and G. Xie, “Heat transfer enhancement of wedge-shaped channels by replacing pin fins with Kagome lattice structures,” Int. J. Heat Mass Transfer, vol. 141, pp. 88–101, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.06.059.
  • I. A. Pardeshi, “Flow and heat transfer in an L-shaped cooling passage with ribs and pin fins for the trailing edge of a gas-turbine vane and blade,” Master's thesis, Purdue University, 2013. http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.1020.6010&rep=rep1&type=pdf
  • F. Hoffmann, “Heat transfer performance and pressure drop of Kagome core metal truss panels,” MPhil dissertation, University of Cambridge, 2002.
  • A. Goldsmith, T. E. Waterman, H. J. Hirschhorn, and M. W. Zemansky, “Handbook of thermophysical properties of solid materials, I. Elements (melting temperature above 1000 °F),” Am. J. Phys., vol. 29, no. 11, pp. 795–795, 1961. DOI: 10.1119/1.1937612.
  • F. R. Menter, “Review of the shear-stress transport turbulence model experience from an industrial perspective,” Int. J. Comut. Fluid Dyn., vol. 23, no. 4, pp. 305–316, 2009. DOI: 10.1080/10618560902773387.
  • P. Singh, W. Li, S. V. Ekkad, and J. Ren, “Experimental and numerical investigation of heat transfer inside two-pass rib roughened duct (AR = 1:2) under rotating and stationary conditions,” Int. J. Heat Mass Transfer, vol. 113, pp. 384–398, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.05.085.
  • W. Du, L. Luo, S. Wang, J. Liu, and B. Sunden, “Heat transfer and flow structure in a rotating duct with detached pin fins,” Numer. Heat Transf. Part A Appl., vol. 75, no. 4, pp. 217–241, 2019. DOI: 10.1080/10407782.2019.1580957.
  • S. M. Hosseinalipour, P. Afkari, H. Shahbazian, and B. Sundén, “A numerical framework for heat transfer and pressure loss estimation of matrix cooling geometry in stationary and rotational states,” Numer. Heat Transf. Part A Appl., vol. 76, no. 5, pp. 348–368, 2019. DOI: 10.1080/10407782.2019.1630236.
  • S. Chen, Z. Liang, W. Gu, and W. Yuan, “Influence of rotation speed on the steady cooling effects in the turbine disc cavity,” J. Phys.: Conf. Ser., vol. 1300, no. 1, pp. 012034, 2019. DOI: 10.1088/1742-6596/1300/1/012034.
  • C. G. Speziale and S. Thangam, “Analysis of an RNG based turbulence model for separated flows,” Int. J. Eng. Sci., vol. 30, no. 10, pp. 1379-1IN4, 1992. DOI: 10.1016/0020-7225(92)90148-A.
  • A. Kumar and M.-H. Kim, “Thermohydraulic performance of rectangular ducts with different multiple V-rib roughness shapes: a comprehensive review and comparative study,” Renew. Sustain. Energy Rev., vol. 54, pp. 635–652, 2016. DOI: 10.1016/j.rser.2015.10.030.
  • Y. Li, H. Deng, Z. Tao, G. Xu, and S. Tian, “Heat transfer performance in a rotating two-inlet cooling wedge-shaped channel with lateral inflow holes,” Int. J. Heat Mass Transfer, vol. 108, pp. 1418–1427, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.01.032.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.