Heat transfer augmentation of heated block surfaces in a turbulent flow channel by a slotted ribbed plate

References

• P. Mayeli, H. Hesami, H. Besharati-Foumani, and M. Niajalili, “Al2O3-Water nanofluid heat transfer and entropy generation in a ribbed channel with wavy wall in the presence of magnetic field,” Numer. Heat Transfer, A, vol. 73, no. 9, pp. 604–623, 2018. DOI: 10.1080/10407782.2018.1461494.
   Web of Science ®Google Scholar
• S. W. Chang, T. W. Chen, and Y. W. Chen, “Detailed heat transfer and friction factor measurements for square channel enhanced by plate insert with inclined baffles and perforated slots,” Appl. Thermal Eng., vol. 159, pp. 113856, 2019. DOI: 10.1016/j.applthermaleng.2019.113856.
   Web of Science ®Google Scholar
• Y. T. Yang, H. W. Tang, B. Y. Zeng, and M. H. Jian, “Numerical simulation and optimization of turbulent nanofluids in a three-dimensional arc rib-grooved channel,” Numer. Heat Transfer, A, vol. 70, no. 8, pp. 831–846, 2016. DOI: 10.1080/10407782.2016.1214513.
   Web of Science ®Google Scholar
• R. Henniche and A. Korichi, “Heat transfer enhancement in self-sustained oscillatory flow in a staggered baffled vertical channel under the buoyancy effect,” Numer. Heat Transfer, A, vol. 71, no. 12, pp. 1189–1204, 2017. DOI: 10.1080/10407782.2017.1353370.
   Web of Science ®Google Scholar
• H. W. Wu and C. T. Lau, “Unsteady Turbulent Heat Transfer of Mixed Convection in a Reciprocating Ribbed Circular Channel,” Int. J. Heat Mass Transfer, vol. 48, no. 13, pp. 2708–2721, 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.01.014.
   Web of Science ®Google Scholar
• B. M. D. Miranda and N. K. Anand, “Convective heat transfer in a channel with porous baffles,” Numer. Heat Transfer, A, vol. 46, no. 5, pp. 425–452, 2004. DOI: 10.1080/10407780490478515.
   Web of Science ®Google Scholar
• R. Kumar, M. Sethi, R. Chauhan, and A. Kumar, “Experimental study of enhancement of heat transfer and pressure drop in a solar air channel with discretized broken V-pattern baffle,” Renew. Energy, vol. 101, pp. 856–872, 2017. DOI: 10.1016/j.renene.2016.09.033.
   Web of Science ®Google Scholar
• J. Wang and C. Wang, “Heat transfer and flow characteristics of a rectangular channel with a small circular cylinder having slit-vent vortex generator,” Int. J. Therm. Sci., vol. 104, pp. 158–171, 2016. DOI: 10.1016/j.ijthermalsci.2016.01.006.
   Web of Science ®Google Scholar
• R. Karwa and B. K. Maheshwari, “Heat transfer and friction in an asymmetrically heated rectangular duct with half and fully perforated baffles at different pitches,” Int. Commun. Heat Mass Transfer, vol. 36, no. 3, pp. 264–268, 2009. DOI: 10.1016/j.icheatmasstransfer.2008.11.005.
   Web of Science ®Google Scholar
• S. Chamoli, R. Lu, and P. Yu, “Thermal characteristic of a turbulent flow through a circular tube fitted with perforated vortex generator inserts,” Appl. Therm Eng., vol. 121, pp. 1117–1134, 2017. DOI: 10.1016/j.applthermaleng.2017.03.145.
   Web of Science ®Google Scholar
• H. Benzenine, R. Saim, S. Abboudi, O. Imine, H. F. Oztop, and N. Abu-Hamdeh, “Numerical study of a three-dimensional forced laminar flow in a channel equipped with a perforated baffle,” Numer. Heat Transfer, A, vol. 73, no. 12, pp. 881–894, 2018. DOI: 10.1080/10407782.2018.1486645.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard, K. Ruengpayungsak, C. Thianpong, M. Pimsarn, and V. Chuwattanakul, “Parametric study on thermal enhancement and flow characteristics in a heat exchanger tube installed with protruded baffle bundles,” Int. J. Therm Sci., vol. 145, pp. 106016, 2019. DOI: 10.1016/j.ijthermalsci.2019.106016.
   Web of Science ®Google Scholar
• D. Kong, V. N. Afanasiev, S. A. Isaev, and D. V. Nikushchenko, “Jet vortex heat transfer in turbulent air flow around a plate with a slit rib,” Int. J. Heat Mass Transfer, vol. 146, pp. 118867, 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.118867.
   Web of Science ®Google Scholar
• Y. T. Yang, H. W. Tang, and C. J. Wong, “Numerical simulation and optimization of turbulent fluids in a three-dimensional angled ribbed channel,” Numer. Heat Transfer, A, vol. 70, no. 5, pp. 532–545, 2016. DOI: 10.1080/10407782.2016.1173475.
   Web of Science ®Google Scholar
• D. Sahel, H. Ameur, R. Benzeguir, and Y. Kamla, “Enhancement of heat transfer in a rectangular channel with perforated baffles,” Appl. Thermal Eng., vol. 101, pp. 156–164, 2016. DOI: 10.1016/j.applthermaleng.2016.02.136.
   Web of Science ®Google Scholar
• A. Salvagni, D. Borello, F. Rispoli, and K. Hanjalić, “Large-eddy simulations of heat transfer in asymmetric rib-roughened ducts: Effects of rotation,” Int. J. Heat Fluid Flow, vol. 68, pp. 373–385, 2017. DOI: 10.1016/j.ijheatfluidflow.2017.09.019.
   Web of Science ®Google Scholar
• S. W. Perng and H. W. Wu, “Buoyancy-aided/opposed convection heat transfer for unsteady turbulent flow across a square cylinder in a vertical channel,” Int. J. Heat Mass Transfer, vol. 50, no. 19-20, pp. 3701–3717, 2007. DOI: 10.1016/j.ijheatmasstransfer.2007.02.026.
   Web of Science ®Google Scholar
• S. W. Perng and H. W. Wu, “Numerical investigation of mixed convective heat transfer for unsteady turbulent flow over heated blocks in a horizontal channel,” Int. J. Therm Sci., vol. 47, no. 5, pp. 620–632, 2008. DOI: 10.1016/j.ijthermalsci.2007.04.003.
   Web of Science ®Google Scholar
• S. W. Perng and H. W. Wu, “Heat Transfer Enhancement for turbulent mixed convection in reciprocating channels by various rib installations,” J. Enh. Heat Transf., vol. 20, no. 2, pp. 95–114, 2013. DOI: 10.1615/JEnhHeatTransf.2013005137.
   Web of Science ®Google Scholar
• E. Velayati and M. Yaghoubi, “Numerical study of convective heat transfer from an array of parallel bluff plates,” Int. J. Heat Fluid Flow, vol. 26, no. 1, pp. 80–91, 2005. DOI: 10.1016/j.ijheatfluidflow.2004.05.001.
   Web of Science ®Google Scholar
• U. Allauddin, N. Uddin, and B. Weigand, “Heat transfer enhancement by jet impingement on a flat surface with detached-ribs under cross-flow conditions,” Numer. Heat Transfer, A, vol. 63, no. 12, pp. 921–940, 2013. DOI: 10.1080/10407782.2013.757155.
   Web of Science ®Google Scholar
• H. Wee, Q. Zhang, P. M. Ligrani, and S. Narasimhan, “Numerical predictions of heat transfer and flow characteristics of heat sinks with ribbed and dimpled surfaces in laminar flow,” Numer. Heat Transfer, A, vol. 53, no. 11, pp. 1156–1175, 2008. DOI: 10.1080/10407780701853371.
   Web of Science ®Google Scholar
• Z. Shen, D. Zhang, and Y. Xie, “Heat transfer enhancement in gas turbine U-shaped channel with rib tabulators under rotational effect,” Energy Proc,, vol. 61, pp. 2501–2504, 2014. DOI: 10.1016/j.egypro.2014.12.032.
   Google Scholar
• D. Zheng, X. Wang, and Q. Yuan, “Numerical investigation on the flow and heat transfer characteristics in a rectangular channel with V-shaped slit ribs,” Infrared Phys. Technol., vol. 101, pp. 56–67, 2019. DOI: 10.1016/j.infrared.2019.06.004.
   Web of Science ®Google Scholar
• S. V. Patankar, Numerical Heat Transfer and Fluid Flow. New York: McGraw-Hill, 1980.
   Google Scholar
• A. Bejan, 1995, Convection Heat Transfer, second ed. New York: Wiley, pp. 62–75.
   Google Scholar
• B. E. Launder and D. B. Spalding, “The numerical computation of turbulent flows,” Comput. Meth. Appl. Mech. Eng, vol. 3, no. 2, pp. 269–289, 1974. DOI: 10.1016/0045-7825(74)90029-2.
   Google Scholar
• B. A. Kader, “Temperature and concentration profiles in fully turbulent boundary layers,” Int. J. Heat Mass Transfer, vol. 24, no. 9, pp. 1541–1544, 1981. DOI: 10.1016/0017-9310(81)90220-9.
   Web of Science ®Google Scholar
• S. A. Beig, E. Mirzakhalili, and F. Kowsari, “Investigation of optimal position of a vortex generator in a blocked channel for heat transfer enhancement of electronic chips,” Int. J. Heat Mass Transfer, vol. 54, no. 19/20, pp. 4317–4324, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.05.013.
   Web of Science ®Google Scholar