Flow and thermal transport characteristics of Triply-Periodic Minimal Surface (TPMS)-based gyroid and Schwarz-P cellular materials

References

• C. Y. Zhao, “Review on thermal transport in high porosity cellular metal foams with open cells,” Int. J. Heat Mass Transf., vol. 55, no. 13–14, pp. 3618–3632, 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.03.017.
   Web of Science ®Google Scholar
• K. Boomsma, D. Poulikakos, and F. Zwick, “Metal foams as compact high performance heat exchangers,” Mech. Mater., vol. 35, no. 12, pp. 1161–1176, 2003. DOI: 10.1016/j.mechmat.2003.02.001.
   Web of Science ®Google Scholar
• P. Singh, K. Nithyanandam, M. Zhang, and R. L. Mahajan, “The effect of metal foam thickness on jet array impingement heat transfer in high-porosity aluminum foams,” J. Heat Transfer, vol. 142, no. 5, pp. 052301, 2020. DOI: 10.1115/1.4045640.
   Web of Science ®Google Scholar
• S. Krishnan, J. Y. Murthy, and S. V. Garimella, “Direct simulation of transport in open-cell metal foam,” J. Heat Transfer, vol. 128, no. 8, pp. 793–799, 2006, DOI: 10.1115/1.2227038.
   Web of Science ®Google Scholar
• Y. W. Kwon, R. E. Cooke, and C. Park, “Representative unit-cell models for open-cell metal foams with or without elastic filler,” Mater. Sci. Eng. A, vol. 343, no. 1–2, pp. 63–70, 2003. DOI: 10.1016/S0921-5093(02)00360-X.
   Web of Science ®Google Scholar
• K. Boomsma and D. Poulikakos, “On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam,” Int. J. Heat Mass Transf., vol. 44, no. 4, pp. 827–836, 2001. DOI: 10.1016/S0017-9310(00)00123-X.
   Web of Science ®Google Scholar
• X. Xiao, P. Zhang, and M. Li, “Preparation and thermal characterization of paraffin/metal foam composite phase change material,” Appl. Energy, vol. 112, pp. 1357–1366, 2013. DOI: 10.1016/j.apenergy.2013.04.050.
   Web of Science ®Google Scholar
• C. Y. Zhao, T. J. Lu, and H. P. Hodson, “Natural convection in metal foams with open cells,” Int. J. Heat Mass Transf., vol. 48, no. 12, pp. 2452–2463, 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.01.002.
   Web of Science ®Google Scholar
• V. S. Sambamurthy, S. Madhavan, P. Singh, and S. V. Ekkad, “Array jet impingement on high porosity thin metal foams: Effect of foam height, pore-density and spent air crossflow scheme on flow distribution and heat transfer,” J. Heat Transfer, vol. 142, no. 11, pp. 112301, 2020. DOI: 10.1115/1.4047560.
   Web of Science ®Google Scholar
• P. Singh, K. Nithyanandam, and R. L. Mahajan, “An experimental and numerical investigation of forced convection in high porosity aluminum foams subjected to jet array impingement in channel-flow,” Int. J. Heat Mass Transf., vol. 149, pp. 119107, 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119107.
   Web of Science ®Google Scholar
• P. Singh, M. Zhang, J. Pandit, and R. L. Mahajan, “Array jet impingement onto high porosity thin metal foams at zero jet-to-foam spacing,” presented at the ASME Int. Mech. Eng. Congr. Expo. Proc., Pittsburgh, PA, Nov. 9–15, 2018. DOI: 10.1115/imece2018-87915.
   Google Scholar
• P. Singh, M. Zhang, and R. L. Mahajan, “Effect of metal foam thickness and pore density on array jet impingement heat transfer,” presented at the ASME Int. Mech. Eng. Congr. Expo. Proc., Salt Lake, UT, Jan. 21, 2019. DOI: 10.1115/IMECE2019-11591.
   Google Scholar
• S. Madhavan, P. Singh, and S. V. Ekkad, “Experimental investigation of heat transfer enhancement through array jet impingement on various configurations of high porosity thin metal foams,” presented at the ASME Int. Mech. Eng. Congr. Expo. Proc., Pittsburgh, PA, Nov. 9–15, 2018. DOI: 10.1115/imece2018-86432.
   Google Scholar
• S. Madhavan, P. Singh, and S. Ekkad, “Jet impingement heat transfer enhancement by packing high-porosity thin metal foams between jet exit plane and target surface,” J. Therm. Sci. Eng. Appl., vol. 11, no. 6, pp. 061016, 2019. DOI: 10.1115/1.4043470.
   Web of Science ®Google Scholar
• T. Tancogne-Dejean and D. Mohr, “Stiffness and specific energy absorption of additively-manufactured metallic BCC metamaterials composed of tapered beams,” Int. J. Mech. Sci., vol. 141, pp. 101–116, 2018. DOI: 10.1016/j.ijmecsci.2018.03.027.
   Web of Science ®Google Scholar
• P. Ekade and S. Krishnan, “Fluid flow and heat transfer characteristics of octet truss lattice geometry,” Int. J. Therm. Sci., vol. 137, pp. 253–261, 2019. DOI: 10.1016/j.ijthermalsci.2018.11.031.
   Web of Science ®Google Scholar
• J. Broughton and Y. Joshi, “Comparison of single-phase convection in additive manufactured versus traditional metal foams,” J. Heat Transfer, vol. 142, no. 8, pp. 082201, 2020. DOI: 10.1115/1.4046972.
   Web of Science ®Google Scholar
• O. Al-Ketan et al, “Microarchitected stretching-dominated mechanical metamaterials with minimal surface topologies,” Adv. Eng. Mater., vol. 20, no. 9, pp. 1800029, 2018. DOI: 10.1002/adem.201800029.
   Web of Science ®Google Scholar
• A. Chaudhari, P. Ekade, and S. Krishnan, “Experimental investigation of heat transfer and fluid flow in octet-truss lattice geometry,” Int. J. Therm. Sci., vol. 143, pp. 64–75, 2019. DOI: 10.1016/j.ijthermalsci.2019.05.003.
   Web of Science ®Google Scholar
• J. Y. Ho, K. C. Leong, and T. N. Wong, “Additively-manufactured metallic porous lattice heat exchangers for air-side heat transfer enhancement,” Int. J. Heat Mass Transf., vol. 150, pp. 119262, 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119262.
   Web of Science ®Google Scholar
• F. S. L. Bobbert et al., “Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties,” Acta Biomater., vol. 53, pp. 572–584, 2017. DOI: 10.1016/j.actbio.2017.02.024.
   PubMed Web of Science ®Google Scholar
• J. Shi et al., “A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering,” Sci. Rep., vol. 8, pp. 7395, 2018. DOI: 10.1038/s41598-018-25750-9.
   PubMed Web of Science ®Google Scholar
• D. W. Abueidda et al., “Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architectures,” Mater. Des., vol. 122, pp. 255–267, 2017. DOI: 10.1016/j.matdes.2017.03.018.
   Web of Science ®Google Scholar
• O. Al-Ketan, D. W. Lee, R. Rowshan, and R. K. Abu Al-Rub, “Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties,” J. Mech. Behav. Biomed. Mater., vol. 102, pp. 103520, 2020. DOI: 10.1016/j.jmbbm.2019.103520.
   PubMed Web of Science ®Google Scholar
• D. W. Abueidda et al., “Mechanical properties of 3D printed polymeric gyroid cellular structures: Experimental and finite element study,” Mater. Des., vol. 165, pp. 107597, 2019. DOI: 10.1016/j.matdes.2019.107597.
   Web of Science ®Google Scholar
• R. Ambu and A. E. Morabito, “Porous scaffold design based on minimal surfaces: Development and assessment of variable architectures,” Symmetry (Basel), vol. 10, no. 9, pp. 361, 2018. DOI: 10.3390/sym10090361.
   Google Scholar
• J. Santos, T. Pires, B. P. Gouveia, A. P. G. Castro, and P. R. Fernandes, “On the permeability of TPMS scaffolds,” J. Mech. Behav. Biomed. Mater., vol. 110, pp. 103932, 2020. DOI: 10.1016/j.jmbbm.2020.103932.
   PubMed Web of Science ®Google Scholar
• D. Ali, M. Ozalp, S. B. G. Blanquer, and S. Onel, “Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: A CFD analysis,” Eur. J. Mech. B/Fluids, vol. 79, pp. 376–385, 2020. DOI: 10.1016/j.euromechflu.2019.09.015.
   Web of Science ®Google Scholar
• A. P. G. Castro, T. Pires, J. E. Santos, B. P. Gouveia, and P. R. Fernandes, “Permeability versus design in TPMS scaffolds,” Materials (Basel), vol. 12, no. 8, pp. 1313, 2019. DOI: 10.3390/ma12081313.
   Web of Science ®Google Scholar
• H. Montazerian, M. Zhianmanesh, E. Davoodi, A. S. Milani, and M. Hoorfar, “Longitudinal and radial permeability analysis of additively manufactured porous scaffolds: Effect of pore shape and porosity,” Mater. Des., vol. 122, pp. 146–156, 2017. DOI: 10.1016/j.matdes.2017.03.006.
   Web of Science ®Google Scholar
• M. Zhianmanesh, M. Varmazyar, and H. Montazerian, “Fluid permeability of graded porosity scaffolds architectured with minimal surfaces,” ACS Biomater. Sci. Eng., vol. 5, no. 3, pp. 1228–1237, 2019. DOI: 10.1021/acsbiomaterials.8b01400.
   PubMed Web of Science ®Google Scholar
• Y. Lu, L. L. Cheng, Z. Yang, J. Li, and H. Zhu, “Relationship between the morphological, mechanical and permeability properties of porous bone scaffolds and the underlying microstructure,” PLoS One, vol. 15, no. 9, pp. e0238471, 2020. DOI: 10.1371/journal.pone.0238471.
   PubMed Web of Science ®Google Scholar
• S. Catchpole-Smith et al., “Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion,” Addit. Manuf., vol. 30, pp. 100846, 2019. DOI: 10.1016/j.addma.2019.100846.
   Web of Science ®Google Scholar
• D. W. Abueidda et al., “Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces,” Mech. Mater., vol. 95, pp. 102–115, 2016. DOI: 10.1016/j.mechmat.2016.01.004.
   Web of Science ®Google Scholar
• A. Mirabolghasemi, A. H. Akbarzadeh, D. Rodrigue, and D. Therriault, “Thermal conductivity of architected cellular metamaterials,” Acta Mater., vol. 174, pp. 61–80, 2019. DOI: 10.1016/j.actamat.2019.04.061.
   Web of Science ®Google Scholar
• W. Li, G. Yu, and Z. Yu, “Bioinspired heat exchangers based on triply periodic minimal surfaces for supercritical CO2 cycles,” Appl. Therm. Eng., vol. 179, pp. 115686, 2020. DOI: 10.1016/j.applthermaleng.2020.115686.
   Web of Science ®Google Scholar
• J. Kim and D.-J. Yoo, “3D printed compact heat exchangers with mathematically defined core structures,” J. Comput. Des. Eng., vol. 7, no. 4, pp. 527–550, 2020. DOI: 10.1093/jcde/qwaa032.
   Web of Science ®Google Scholar
• O. Al-Ketan et al., “Forced convection computational fluid dynamics analysis of architected and three-dimensional printable heat sinks based on triply periodic minimal surfaces,” J. Therm. Sci. Eng. Appl., vol. 13, no. 2, pp. 021010, 2021. DOI: 10.1115/1.4047385.
   Google Scholar
• K. A. Brakke, “The surface evolver,” Exp. Math., vol. 1, no. 2, pp. 141–165, 1992. DOI: 10.1080/10586458.1992.10504253.
   Google Scholar
• M. Iasiello et al., “Numerical analysis of heat transfer and pressure drop in metal foams for different morphological models,” J. Heat Transfer, vol. 136, no. 11, pp. 112601, 2014. DOI: 10.1115/1.4028113.
   Web of Science ®Google Scholar
• K. Boomsma and D. Poulikakos, “The effects of compression and pore size variations on the liquid flow characteristics in metal foams,” J. Fluids Eng. Trans. ASME, vol. 124, no. 1, pp. 263–272, 2002. DOI: 10.1115/1.1429637.
   Web of Science ®Google Scholar
• N. Dukhan, Ö. Baǧci, and M. Özdemir, “Metal foam hydrodynamics: Flow regimes from pre-Darcy to turbulent,” Int. J. Heat Mass Transf., vol. 77, pp. 114–123, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.05.017.
   Web of Science ®Google Scholar
• D. Seguin, A. Montillet, and J. Comiti, “Experimental characterisation of flow regimes in various porous media-I: Limit of laminar flow regime,” Chem. Eng. Sci., vol. 53, no. 21, pp. 3751–3761, 1998. DOI: 10.1016/S0009-2509(98)00175-4.
   Web of Science ®Google Scholar
• D. Seguin, A. Montillet, J. Comiti, and F. Huet, “Experimental characterization of flow regimes in various porous media-II: Transition to turbulent regime,” Chem. Eng. Sci., vol. 53, no. 22, pp. 3897–3909, 1998. DOI: 10.1016/S0009-2509(98)80003-1.
   Web of Science ®Google Scholar
• M. J. Hall and J. P. Hiatt, “Measurements of pore scale flows within and exiting ceramic foams,” Exp. Fluids, vol. 20, pp. 433–440, 1996. DOI: 10.1007/BF00189382.
   Web of Science ®Google Scholar