Reference
- G. Xia, L. Cao, and G. Bi, “A review on battery thermal management in electric vehicle application,” J. Power Sources, vol. 367, pp. 90–105, 2017. DOI: https://doi.org/10.1016/j.jpowsour.2017.09.046.
- H. Liu, Z. Wei, W. He, and J. Zhao, “Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review,” Energy Convers. Manag., vol. 150, pp. 304–330, 2017. DOI: https://doi.org/10.1016/j.enconman.2017.08.016.
- J. Sun et al., “Toxicity, a serious concern of thermal runaway from commercial Li-ion battery,” Nano Energy, vol. 27, pp. 313–319, 2016. DOI: https://doi.org/10.1016/j.nanoen.2016.06.031.
- T. Wang, K. Tseng, J. Zhao, and Z. Wei, “Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies,” Appl. Energy, vol. 134, pp. 229–238, 2014. DOI: https://doi.org/10.1016/j.apenergy.2014.08.013.
- W. Waag and D. Sauer, “Adaptive estimation of the electromotive force of the lithium-ion battery after current interruption for an accurate state-of-charge and capacity determination,” Appl. Energy, vol. 111, pp. 416–427, 2013. DOI: https://doi.org/10.1016/j.apenergy.2013.05.001.
- K. Chen, M. Song, W. Wei, and S. Wang, “Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement,” Energy Rev., vol. 145, pp. 603–613, 2018. DOI: https://doi.org/10.1016/j.energy.2017.12.110.
- W. Wu, S. Wang, W. Wu, K. Chen, S. Hong, and Y. Lai, “A critical review of battery thermal performance and liquid based battery thermal management,” Energy Convers. Manag., vol. 182, pp. 262–281, 2019. DOI: https://doi.org/10.1016/j.enconman.2018.12.051.
- F. Samimi, A. Babapoor, M. Azizi, and G. Karimi, “Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers,” Energy, vol. 96, pp. 355–371, 2016. DOI: https://doi.org/10.1016/j.energy.2015.12.064.
- A. Tang, J. Li, L. Lou, C. Shan, and X. Yuan, “Optimization design and numerical study on water cooling structure for power lithium battery pack,” Appl. Therm. Eng., vol. 159, pp. 1359–4311, 2019.
- C. Zhao, W. Cao, T. Dong, and F. Jiang, “Thermal behavior study of discharging/charging cylindrical lithium-ion battery module cooled by channeled liquid flow,” Int. J. Heat Mass Transf., vol. 120, pp. 751–762, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.083.
- J. Zhao, Z. Rao, and Y. Li, “Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery,” Energy Convers. Manag., vol. 103, pp. 157–165, 2015. DOI: https://doi.org/10.1016/j.enconman.2015.06.056.
- R. Liu, J. Chen, J. Xun, K. Jiao, and Q. Du, “Numerical investigation of thermal behaviors in lithium-ion battery stack discharge,” Appl. Energy, vol. 132, pp. 288–297, 2014. DOI: https://doi.org/10.1016/j.apenergy.2014.07.024.
- T. Bandhauer and S. Garimella, “Passive, internal thermal management system for batteries using microscale liquid-vapor phase change,” Appl. Therm. Eng., vol. 61, no. 2, pp. 756–769, 2013. DOI: https://doi.org/10.1016/j.applthermaleng.2013.08.004.
- J. Xie, M. Zang, S. Wang, and Z. Ge, “Optimization investigation on the liquid cooling heat dissipation structure for the lithium-ion battery package in electric vehicles,” Proc. Inst. Mech. Eng. Part D: J. Automob. Eng., vol. 231, no. 13, pp. 1735–1750, 2017. DOI: https://doi.org/10.1177/0954407016685457.
- D. Chen, J. Jiang, G. Kim, C. Yang, and A. Pesaran, “Comparison of different cooling methods for lithium ion battery cells,” Appl. Therm. Eng., vol. 94, pp. 846–854, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2015.10.015.
- Z. Qian, Y. Li, and Z. Rao, “Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling,” Energy Convers. Manag., vol. 126, pp. 622–631, 2016. DOI: https://doi.org/10.1016/j.enconman.2016.08.063.
- Z. Shang, H. Qi, X. Liu, C. Ouyang, and Y. Wang, “Structural optimization of lithium-ion battery for improving thermal performance based on a liquid cooling system,” Int. J. Heat Mass Transf., vol. 130, pp. 33–41, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.074.
- T. Deng, G. Zhang, and Y. Ran, “Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate,” Int. J. Heat Mass Transf., vol. 125, pp. 143–152, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.065.
- A. Jarrett and I. Kim, “Design optimization of electric vehicle battery cooling plates for thermal performance,” J. Power Sources, vol. 196, no. 23, pp. 10359–10368, 2011. DOI: https://doi.org/10.1016/j.jpowsour.2011.06.090.
- Y. Huo, Z. Rao, X. Liu, and J. Zhao, “Investigation of power battery thermal management by using mini-channel cold plate,” Energy Convers. Manag., vol. 89, pp. 387–395, 2015. DOI: https://doi.org/10.1016/j.enconman.2014.10.015.
- D. Bernardi, E. Pawlikowski, and J. Newman, “A general energy balance for battery systems,” J. Electrochem. Soc., vol. 132, no. 1, pp. 5–12, 1985.