References
- Y. B. Tao and Y. L. He, “A review of phase change material and performance enhancement method for latent heat storage system,” Renew. Sustain. Energy Rev., vol. 93, pp. 245–259, 2018. DOI: https://doi.org/10.1016/j.rser.2018.05.028.
- N. S. Dhaidan, J. M. Khodadadi, T. A. Al-Hattab, and S. M. Al-Mashat, “Experimental and numerical study of constrained melting of n-octadecane with CuO nanoparticle dispersions in a horizontal cylindrical capsule subjected to a constant heat flux,” Int. J. Heat Mass Transf., vol. 67, pp. 523–534, Dec. 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.08.001.
- M. J. Allen, N. Sharifi, A. Faghri, and T. L. Bergman, “Effect of inclination angle during melting and solidification of a phase change material using a combined heat pipe-metal foam or foil configuration,” Int. J. Heat Mass Transf., vol. 80, pp. 767–780, Jan. 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.09.071.
- T. Kim, D. M. France, W. Yu, W. Zhao, and D. Singh, “Heat transfer analysis of a latent heat thermal energy storage system using graphite foam for concentrated solar power,” Solar Energy, vol. 103, pp. 438–447, May 2014. DOI: https://doi.org/10.1016/j.solener.2014.02.038.
- W. H. Zhao, D. M. France, W. H. Yu, T. Kim, and D. Singh, “Phase change material with graphite foam for applications in high-temperature latent heat storage systems of concentrated solar power plants[J],” Renew Energ, vol. 69, pp. 134–146, 2014. DOI: https://doi.org/10.1016/j.renene.2014.03.031.
- L. Fan and J. M. Khodadadi, “Thermal conductivity enhancement of phase change materials for thermal energy storage: A review,” Renew. Sustain. Energy Rev., vol. 15, no. 1, pp. 24–26, Jan. 2011. DOI: https://doi.org/10.1016/j.rser.2010.08.007.
- S. Arena, E. Casti, J. Gasia, L. F. Cabeza, and G. Cau, “Numerical analysis of a latent heat thermal energy storage system under partial load operating conditions,” Renew. Energy, vol. 128, pp. 350–361, 2018. DOI: https://doi.org/10.1016/j.renene.2018.05.072.
- H. Shabgard, C. W. Robak, T. L. Bergman, and A. Faghri, “Heat transfer and exergy analysis of cascaded latent heat storage with gravity-assisted heat pipes for concentrating solar power applications,” Solar Energy, vol. 86, no. 3, pp. 816–830, 2012. DOI: https://doi.org/10.1016/j.solener.2011.12.008.
- M. Mazman et al., “Utilization of phase change materials in solar domestic hot water systems,” Renew. Energy, vol. 34, no. 6, pp. 1639–1643, 2009. DOI: https://doi.org/10.1016/j.renene.2008.10.016.
- A. H. Mosaffa, L. Garousi Farshi, C. A. Infante Ferreira, and M. A. Rosen, “Energy and exergy evaluation of a multiple-PCM thermal storage unit for free cooling applications,” Renew. Energy, vol. 68, pp. 452–458, Aug. 2014. DOI: https://doi.org/10.1016/j.renene.2014.02.025.
- A. H. Mosaffa, C. A. Infante Ferreira, F. Talati, and M. A. Rosen, “Thermal performance of a multiple PCM thermal storage unit for free cooling,” Energy Convers. Manage., vol. 67, pp. 1–7, Mar. 2013. DOI: https://doi.org/10.1016/j.enconman.2012.10.018.
- S. H. Park, Y. G. Park, and M. Y. Ha, “A numerical study on the effect of the number and arrangement of tubes on the melting performance of phase change material in a multi-tube latent thermal energy storage system” J. Energy Storage, vol. 32, pp. 101780, 2020. DOI: https://doi.org/10.1016/j.est.2020.101780.
- K. A. Taha and M. Muhammad, “Comparison between the single-PCM and multi-PCM thermal energy storage design,” Energy Convers. Manage., vol. 83, pp. 79–87, 2014. DOI: https://doi.org/10.1016/j.enconman.2014.03.047.
- M. Zukowski, “Mathematical modeling and numerical simulation of a short term thermal energy storage system using phase change material for heating applications,” Energy Convers. Manage., vol. 48, no. 1, pp. 155–165, 2007. DOI: https://doi.org/10.1016/j.enconman.2006.04.017.
- P. S. Li et al., “Numerical research on performance comparison of multi-layer high temperature latent heat storage under different structure parameter,” Renew. Energy, vol. 156, pp. 131–141, 2020. DOI: https://doi.org/10.1016/j.renene.2020.04.004.
- S. Tiari and S. Qiu, “Three-dimensional simulation of high temperature latent heat thermal energy storage system assisted by finned heat pipes,” Energy Convers. Manage., vol. 105, pp. 260–271, Nov. 2015. DOI: https://doi.org/10.1016/j.enconman.2015.08.004.
- Y. H. Wang and Y. T. Yang, “Three-dimensional transient cooling simulations of a portable electronic device using PCM (phase change materials) in multi-fin heat sink,” Energy, vol. 36, no. 8, pp. 5214–5224, 2011. DOI: https://doi.org/10.1016/j.energy.2011.06.023.
- B. Kamkari and H. Shokouhmand, “Experimental investigation of phase change material melting in rectangular enclosures with horizontal partial fins,” Int. J. Heat Mass Transf., vol. 78, pp. 839–851, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.07.056.
- M. S. Mahdi et al., “ Improved PCM melting in a thermal energy storage system of double-pipe helical-coil tube,” Energy Convers. Manage., vol. 203, pp. 112238, 2020.
- F. Fornarelli and S. M. Camporeale, “Simplified prediction model of the discharging time of a shell-and-tube LHTES,” Appl. Therm. Eng., vol. 179, pp. 115709, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115709.
- F. Fornarelli, S. M. Camporeale, and B. Fortunato, “Simplified theoretical model to predict the melting time of a shell-and-tube LHTES,” Appl. Therm. Eng., vol. 153, pp. 51–57, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.02.130.
- F. Fornarelli et al., “Heat transfer enhancement induced by the geometry of a LHTES device,” Energy Procedia, vol. 148, pp. 471–478, 2018.
- E. Drabiniok and A. Neyer, “Bionic micro porous evaporation foil for photovoltaic cell cooling,” Microelectron. Eng., vol. 119, pp. 65–69, May 2014. DOI: https://doi.org/10.1016/j.mee.2014.02.013.
- J. Cui and Y. Fu, “A numerical study on pressure drop in micro-channel flow with different bionic micro-grooved surfaces,” J Bionic Eng., vol. 9, no. 1, pp. 99–109, 2012. DOI: https://doi.org/10.1016/S1672-6529(11)60102-9.
- H. J. Xu, C. Y. Pan, H. B. Xie, and D.-B. Zhang, “Dynamics modeling and simulation of a bionic swim bladder system in underwater robotics,” J. Bionic Eng., vol. 5, no. 08, pp. 66–71, 2008. DOI: https://doi.org/10.1016/S1672-6529(08)60074-8.
- W. Yang, F. Zhou, H. Zhou, and Y. Liu, “Thermal performance of axial air cooling system with bionic surface structure for cylindrical lithium-ion battery module,” Int. J. Heat Mass Transf., vol. 161, pp. 120307, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.120307.
- H. Yahn et al., “Design approach and hydrodynamic characteristics of a novel bionic airfoil,” Ocean Eng., vol. 216, pp. 1–4, 2020.
- L. M. Tian et al., “The fluid control mechanism of bionic structural heterogeneous composite materials and its potential application in enhancing pump efficiency,” Adv. Mech. Eng., vol. 7, no. 11, pp. 168781401561955, 2015. DOI: https://doi.org/10.1177/1687814015619551.
- Y. Zhang et al., “Experimental analysis on the loop heat pipes with different micro-channel evaporators,” Appl. Therm. Eng., vol. 178, pp. 115547, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115547.
- M. Fang and G. Chen, “Effects of different multiple PCMs on the performance of a latent thermal energy storage system,” Appl. Therm. Eng., vol. 27, no. 5–6, pp. 994–1000, 2007. DOI: https://doi.org/10.1016/j.applthermaleng.2006.08.001.
- S. Arena, E. Casti, J. Gasia, L. F. Cabezab, and G. Caua, “Numerical simulation of a finned-tube LHTES system: Influence of the mushy zone constant on the phase change behaviour[J],” Energy Procedia, vol. 126, pp. 517–524, 2017. DOI: https://doi.org/10.1016/j.egypro.2017.08.237.
- V. R. Voller and C. Prakash, “A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems,” Int. J. Heat Mass Transf., vol. 30, no. 8, pp. 1709–1719, 1987. DOI: https://doi.org/10.1016/0017-9310(87)90317-6.
- Y. T. Yang and Y. H. Wang, “Numerical simulation of three-dimensional transient cooling application on a portable electronic device using phase change material,” Int. J. Therm. Sci., vol. 51, pp. 155–162, 2012. DOI: https://doi.org/10.1016/j.ijthermalsci.2011.08.011.
- B. J. Jones, D. Sun, S. Krishnan, and S. V. Garimella, “Experimental and numerical study of melting in a cylinder,” Int. J. Heat Mass Transf., vol. 49, no. 15–16, pp. 2724–2738, 2006. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.01.006.